Date: Thu, 13 Sep 2007 11:29:16 -0700 From: "Crist J. Clark" <cristclark@comcast.net> To: questions@freebsd.org Subject: CDRW Stopped Working Moving to 6.x Message-ID: <20070913182916.GC3754@goku.pumpky.net>
next in thread | raw e-mail | index | archive | help
I just tried to burn a CD for the first time in a long time on a machine. The burncd(8) command worked fine on this machine in FreeBSD 5.x (or was it 4.x?), but now in 6.2, I get, # burncd -f /dev/acd0 -s 32 data hw.iso fixate burncd: ioctl(CDIOCSTART): Input/output error Looking at the dmesg(1) from the last boot, # fgrep cd0 /var/run/dmesg.boot acd0: CDROM <CRD-8400B/1.06> at ata1-master UDMA33 Makes me think the system is not recognizing the device as CDRW, only CDROM. I get this from atacontrol(8), # atacontrol info ata1 Master: acd0 <CRD-8400B/1.06> ATA/ATAPI revision 0 Slave: no device present # atacontrol cap acd0 Protocol ATA/ATAPI revision 0 device model CRD-8400B serial number 1999/10/12 firmware revision 1.06 cylinders 0 heads 0 sectors/track 0 lba supported lba48 not supported dma supported overlap not supported Feature Support Enable Value Vendor write cache no no read ahead no no Tagged Command Queuing (TCQ) no no 0/0x00 SMART no no microcode download no no security no no power management no no advanced power management no no 0/0x00 automatic acoustic management no no 0/0x00 0/0x00 How can I restore burning capability? -- Crist J. Clark | cjclark@alum.mit.edu
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070913182916.GC3754>