Date: Mon, 4 Feb 2008 12:52:42 +0900 From: Pyun YongHyeon <pyunyh@gmail.com> To: Andriy Gapon <avg@icyb.net.ua> Cc: freebsd-stable@freebsd.org, yongari@freebsd.org Subject: Re: 6.3 nfe: strange behavior after hand Message-ID: <20080204035242.GA28554@cdnetworks.co.kr> In-Reply-To: <47A32501.7080703@icyb.net.ua> References: <47A3041D.5050402@icyb.net.ua> <20080201123603.GA14050@cdnetworks.co.kr> <47A321BB.1060708@icyb.net.ua> <47A32501.7080703@icyb.net.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
--7AUc2qLy4jB3hD7Z Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Fri, Feb 01, 2008 at 03:56:17PM +0200, Andriy Gapon wrote: > on 01/02/2008 15:42 Andriy Gapon said the following: > > on 01/02/2008 14:36 Pyun YongHyeon said the following: > >> After applying attached patch and let me know the output of > >> "devid : xxx, revid : xxx, pwr = xxx". It would be even better > >> if you can show me the above message for working/non-working case. > >> > >> > > > > Applied the patch with correction to actually print rev instead of dev > > for the second time :-) > > This is in working case: > > devid : 269, revid : a3, pwr = 00000003 > > A clarification: I just applied the patch, recompiled and re-loaded the > module. There was no reboot/poweroff/reset in between. > > > Will wait for the non-working situation. > > > Revert previous patch and try attached patch again and let me know how it goes. -- Regards, Pyun YongHyeon --7AUc2qLy4jB3hD7Z Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="nfe.diff2" --- sys/dev/nfe/if_nfe.c.orig 2008-02-02 04:36:24.000000000 +0900 +++ sys/dev/nfe/if_nfe.c 2008-02-04 12:47:11.000000000 +0900 @@ -763,12 +763,6 @@ if ((sc->nfe_flags & NFE_PWR_MGMT) == 0) return; - NFE_WRITE(sc, NFE_RXTX_CTL, NFE_RXTX_RESET | NFE_RXTX_BIT2); - NFE_WRITE(sc, NFE_MAC_RESET, NFE_MAC_RESET_MAGIC); - DELAY(100); - NFE_WRITE(sc, NFE_MAC_RESET, 0); - DELAY(100); - NFE_WRITE(sc, NFE_RXTX_CTL, NFE_RXTX_BIT2); pwr = NFE_READ(sc, NFE_PWR2_CTL); pwr &= ~NFE_PWR2_WAKEUP_MASK; if (sc->nfe_revid >= 0xa3 && @@ -776,6 +770,12 @@ sc->nfe_devid == PCI_PRODUCT_NVIDIA_NFORCE430_LAN2)) pwr |= NFE_PWR2_REVA3; NFE_WRITE(sc, NFE_PWR2_CTL, pwr); + NFE_WRITE(sc, NFE_RXTX_CTL, NFE_RXTX_RESET | NFE_RXTX_BIT2); + NFE_WRITE(sc, NFE_MAC_RESET, NFE_MAC_RESET_MAGIC); + DELAY(100); + NFE_WRITE(sc, NFE_MAC_RESET, 0); + DELAY(100); + NFE_WRITE(sc, NFE_RXTX_CTL, NFE_RXTX_BIT2); } --7AUc2qLy4jB3hD7Z--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080204035242.GA28554>