Date: Sun, 20 Apr 2008 18:59:18 +0400 (MSD) From: Dmitry Morozovsky <marck@rinet.ru> To: Scott Long <scottl@samsco.org> Cc: emaste@freebsd.org, "Andrey V. Elsukov" <bu7cher@yandex.ru>, scottl@freebsd.org, current@freebsd.org, sos@freebsd.org Subject: Re: Adaptec 1420SA support? Message-ID: <20080420185448.X56317@woozle.rinet.ru> In-Reply-To: <48077B1C.5070608@samsco.org> References: 9060000000212025383 <1415691208445504@webmail12.yandex.ru> <48077B1C.5070608@samsco.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 17 Apr 2008, Scott Long wrote: SL> > You can try this patch. SL> > http://butcher.heavennet.ru/patches/kernel/ata/marvell/adaptec.diff SL> SL> That should at least make the chip start to do I/O. I'm not sure if the SL> BIOS-based RAID will work in FreeBSD, though. Make sure you have the SL> ata-raid device loaded so it can at least try to work. If it doesn't, SL> do a 'dd' dump of the very last sector of the disks and send it to me. well, after patching RELENG_7 I have (verbose booting) atapci4: <Adaptec 1420SA SATA300 controller> port 0xe800-0xe8ff mem 0xefd00000-0xefdfffff irq 17 at device 0.0 on pci3 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 55 atapci4: [MPSAFE] atapci4: [ITHREAD] atapci4: Reserved 0x100000 bytes for rid 0x10 type 3 at 0xefd00000 ata8: <ATA channel 0> on atapci4 ata8: SATA connect time=0ms ata8: reset tp1 mask=01 ostat0=50 ostat1=00 ata8: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata8: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata8: [MPSAFE] ata8: [ITHREAD] ata9: <ATA channel 1> on atapci4 ata9: SATA connect time=0ms ata9: reset tp1 mask=01 ostat0=50 ostat1=00 ata9: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata9: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata9: [MPSAFE] ata9: [ITHREAD] ata10: <ATA channel 2> on atapci4 ata10: SATA connect status=00000000 ata10: [MPSAFE] ata10: [ITHREAD] ata11: <ATA channel 3> on atapci4 ata11: SATA connect status=00000000 ata11: [MPSAFE] ata11: [ITHREAD] ... ata8-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad16: 76319MB <MAXTOR STM380215AS 3.AAD> at ata8-master SATA300 ad16: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad16 ad16: Adaptec check1 failed ad16: LSI (v3) check1 failed ad16: LSI (v2) check1 failed ad16: FreeBSD check1 failed ata9-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad18: 76319MB <MAXTOR STM380215AS 3.AAD> at ata9-master SATA300 ad18: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad18 ad18: Adaptec check1 failed ad18: LSI (v3) check1 failed ad18: LSI (v2) check1 failed ad18: FreeBSD check1 failed ATA PseudoRAID loaded but no BIOS-enable RAID1 detected. The last sectors seem to be: -------------------------------------- # dd if=/dev/ad16 skip=156301487 | hd 1+0 records in 1+0 records out 512 bytes transferred in 0.013673 secs (37446 bytes/sec) 00000000 11 de 11 de d1 1f a7 c1 a0 67 cf 2d 05 90 41 02 |.........g.-..A.| 00000010 a0 67 cf 2d f0 69 cf 2d 40 6c cf 2d ff ff ff ff |.g.-.i.-@l.-....| 00000020 30 32 2e 30 30 2e 30 30 ff ff ff ff ff ff ff ff |02.00.00........| 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| * 00000060 a4 f8 50 09 00 00 00 00 ff ff ff ff ff ff ff ff |..P.............| 00000070 00 ff ff ff 00 80 00 00 a4 78 50 09 00 00 00 00 |.........xP.....| 00000080 0f 00 04 00 01 00 02 00 ff ff ff ff ff ff ff ff |................| 00000090 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| * 000000c0 01 00 00 00 01 00 00 00 02 00 00 00 02 00 00 00 |................| 000000d0 04 00 00 00 01 00 00 00 05 00 00 00 04 00 00 00 |................| 000000e0 09 00 00 00 01 00 00 00 ff ff ff ff 00 00 00 00 |................| 000000f0 ff ff ff ff 00 00 00 00 0a 00 00 00 01 00 00 00 |................| 00000100 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| * 00000200 -------------------------------------- # dd if=/dev/ad18 skip=156301487 | hd 1+0 records in 1+0 records out 00000000 11 de 11 de d1 1f a7 c1 a0 67 cf 2d 05 90 41 02 |.........g.-..A.| 512 bytes transferred in 0.016298 secs (31415 bytes/sec) 00000010 a0 67 cf 2d f0 69 cf 2d 40 6c cf 2d ff ff ff ff |.g.-.i.-@l.-....| 00000020 30 32 2e 30 30 2e 30 30 ff ff ff ff ff ff ff ff |02.00.00........| 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| * 00000060 a4 f8 50 09 00 00 00 00 ff ff ff ff ff ff ff ff |..P.............| 00000070 00 ff ff ff 00 80 00 00 a4 78 50 09 00 00 00 00 |.........xP.....| 00000080 0f 00 04 00 01 00 02 00 ff ff ff ff ff ff ff ff |................| 00000090 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| * 000000c0 01 00 00 00 01 00 00 00 02 00 00 00 02 00 00 00 |................| 000000d0 04 00 00 00 01 00 00 00 05 00 00 00 04 00 00 00 |................| 000000e0 09 00 00 00 01 00 00 00 ff ff ff ff 00 00 00 00 |................| 000000f0 ff ff ff ff 00 00 00 00 0a 00 00 00 01 00 00 00 |................| 00000100 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| * 00000200 -------------------------------------- BTW, would you please remind me which option should I activate in kernel config to avoid mixing kernel output log lines like bgNeF1S: RlOiOnTk: s1t9a5t.e5 4c.h1a9n2g.e5d5 :t/ol hD/OPWXNE ? Quick googling did not help. Thanks! Sincerely, D.Marck [DM5020, MCK-RIPE, DM3-RIPN] [ FreeBSD committer: marck@FreeBSD.org ] ------------------------------------------------------------------------ *** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- marck@rinet.ru *** ------------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080420185448.X56317>