Date: Sun, 20 Apr 2008 19:44:50 +0400 (MSD) From: Dmitry Morozovsky <marck@rinet.ru> To: Scott Long <scottl@samsco.org> Cc: "Andrey V. Elsukov" <bu7cher@yandex.ru>, emaste@freebsd.org, current@freebsd.org, sos@freebsd.org Subject: Re: Adaptec 1420SA support? Message-ID: <20080420194331.Y56317@woozle.rinet.ru> In-Reply-To: <20080420193212.Y56317@woozle.rinet.ru> References: 9060000000212025383 <1415691208445504@webmail12.yandex.ru> <48077B1C.5070608@samsco.org> <20080420185448.X56317@woozle.rinet.ru> <480B5DA0.6030404@samsco.org> <20080420192735.G56317@woozle.rinet.ru> <20080420193212.Y56317@woozle.rinet.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 20 Apr 2008, Dmitry Morozovsky wrote:
DM> ar0: 76165MB <DDF RAID1> status: READY
DM> ar0: 155985920 sectors [9709C/255H/63S] <Mole> subdisks defined as:
DM> ar0: disk0 READY (master) using ad16 at ata8-master
DM> ar0: disk1 READY (mirror) using ad18 at ata9-master
DM>
DM>
DM> --------------------------------------------------------
DM>
DM> I'll do some basic checks and follow up with results.
DM>
DM> Thank you very much!
Hmm, not too much exciting results yet:
# fdisk -s ar0
fdisk: invalid fdisk partition table found
fdisk: read_s0: No such file or directory
# bsdlabel -Bw ar0 auto
# set -E
Cannot read termcap database;
using dumb terminal settings.
# fdisk -s ar0
/dev/ar0: 9709 cyl 255 hd 63 sec
Part Start Size Type Flags
4: 0 50000 0xa5 0x80
# bsdlabel -R /dev/stdin ar0
bsdlabel: fopen ar0: No such file or directory
# bsdlabel -R ar0 /dev/stdin
a: 256M 16 4.2BSD 0 0
b: 4G * swap 0 0
d: 4G * 4.2BSD 0.0
e: 8G * 4.2BSD 0 0
# bsdlabel ar0
# /dev/ar0:
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 524288 16 4.2BSD 0 0 0
b: 8388608 524304 swap
c: 155985920 0 unused 0 0 # "raw" part, don't
edit
d: 8388608 8912912 4.2BSD 0 0 0
e: 16777216 17301520 4.2BSD 0 0 0
# newfs /dev/ar0a
/dev/ar0a: 256.0MB (524288 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 64.02MB, 4097 blks, 8256 inodes.
super-block backaups (for fsck -bt #) at:
a9: FAILURE - oversized DMA transfer attempt 65536 > 64512
ad18: setting up DMA failed
ar0: WARNING - mirror protection lost. RAID1 array in DEGRADED mode
aar0: writing of DDF metadata is NOT supported yet
ta8: FAILURE - oversized DMA transfer attempt 65536 > 64512
ad16: setting up DMA failed
ar0: FAILURE - RAID1 array broken
ar0: writing of DDF metadata is NOT supported yet
newfs: wtfs: 65536 bytes at sector 160: Input/output error
#
Any further hints?
Sincerely,
D.Marck [DM5020, MCK-RIPE, DM3-RIPN]
[ FreeBSD committer: marck@FreeBSD.org ]
------------------------------------------------------------------------
*** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- marck@rinet.ru ***
------------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080420194331.Y56317>