Date: Mon, 12 May 2008 12:51:26 +0200 From: Zbigniew Komarnicki <cblasius@gmail.com> To: freebsd-questions@freebsd.org Subject: kernel panic FreeBSD 7.0 - Xorg Message-ID: <200805121251.26443.cblasius@gmail.com>
next in thread | raw e-mail | index | archive | help
--Boundary-00=_uECKIwjqJhaQwyw
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Hello!
I decide to go on FreeBSD 7.0-RELEASE. Before I used 6.3-RELEASE.
But now I cannot get working Xorg. I almost get the kernel panic.
I install fresh 7.0-RELEASE and update ports by portsnam and everything
compiled by ports system. After instalign 'xorg' ports I do the following
steps as root:
Xorg -configure
X -config /root/xorg.conf.new
and I got black monitor and after few seconds the system reboots.
Then I go to single user and do
fsck -p
(Similar was when I logon as root and typed "startx")
After that, I boot the system and I saw on the monitor the following (the
exactly output is in file messages attached in this e-mail):
savecore: reboot after panic: vm_fault: fault on nofault entry, addr: e56e8000
savecore: writing core to vmcore.2
and then I examine the file "xorg.conf.org" (I attached the file) and I saw
that I have there the following line:
Driver "radeon"
In FreeBSD 6.3-RELEASE I had there
Driver "ati"
so I change it to "ati" and do
X -config /root/xorg.conf.new
but with no result - kernel panic again.
What going on here?
After fsck -p i decide to use "vesa" driver. I could only obtain the
resolution "1024x678", but my monitor use "1280x1024". I have the following
monitor: Philips 190P
Could someone help me, please?
If you need more information I send it to you.
Thank you in advance.
Here are additional information:
# uname -a
FreeBSD komp1.dom 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC
2008 root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
I have the following motherboard: A-7N400SL F5 (from first screen after
computer started) and also 3/29/2005-nVidia-nForce-6AG1BG0QC-00.
The attached files:
1. messages (from /var/log/messages)
2. xorg.conf.new (from /root/xorg.conf.new)
Thank you in advance for any help and I'm sorry for my English.
Best wishes,
Zbigniew
--Boundary-00=_uECKIwjqJhaQwyw
Content-Type: text/plain;
charset="us-ascii";
name="messages"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="messages"
May 12 11:38:29 komp1 syslogd: kernel boot file is /boot/kernel/kernel
May 12 11:38:29 komp1 kernel: Copyright (c) 1992-2008 The FreeBSD Project.
May 12 11:38:29 komp1 kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
May 12 11:38:29 komp1 kernel: The Regents of the University of California. All rights reserved.
May 12 11:38:29 komp1 kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
May 12 11:38:29 komp1 kernel: FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
May 12 11:38:29 komp1 kernel: root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
May 12 11:38:29 komp1 kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
May 12 11:38:29 komp1 kernel: CPU: AMD Athlon(tm) XP 2000+ (1660.38-MHz 686-class CPU)
May 12 11:38:29 komp1 kernel: Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
May 12 11:38:29 komp1 kernel: Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
May 12 11:38:29 komp1 kernel: AMD Features=0xc0400800<SYSCALL,MMX+,3DNow!+,3DNow!>
May 12 11:38:29 komp1 kernel: real memory = 2147418112 (2047 MB)
May 12 11:38:29 komp1 kernel: avail memory = 2091872256 (1994 MB)
May 12 11:38:29 komp1 kernel: ACPI APIC Table: <Nvidia AWRDACPI>
May 12 11:38:29 komp1 kernel: ioapic0 <Version 1.1> irqs 0-23 on motherboard
May 12 11:38:29 komp1 kernel: kbd1 at kbdmux0
May 12 11:38:29 komp1 kernel: ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
May 12 11:38:29 komp1 kernel: hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
May 12 11:38:29 komp1 kernel: acpi0: <Nvidia AWRDACPI> on motherboard
May 12 11:38:29 komp1 kernel: acpi0: [ITHREAD]
May 12 11:38:29 komp1 kernel: acpi0: Power Button (fixed)
May 12 11:38:29 komp1 kernel: acpi0: reservation of 0, a0000 (3) failed
May 12 11:38:29 komp1 kernel: acpi0: reservation of 100000, 7fef0000 (3) failed
May 12 11:38:29 komp1 kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
May 12 11:38:29 komp1 kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
May 12 11:38:29 komp1 kernel: cpu0: <ACPI CPU> on acpi0
May 12 11:38:29 komp1 kernel: acpi_button0: <Power Button> on acpi0
May 12 11:38:29 komp1 kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0xcf0-0xcf3 on acpi0
May 12 11:38:29 komp1 kernel: pci0: <ACPI PCI bus> on pcib0
May 12 11:38:29 komp1 kernel: Correcting nForce2 C1 CPU disconnect hangs
May 12 11:38:29 komp1 kernel: agp0: <NVIDIA nForce2 AGP Controller> on hostb0
May 12 11:38:29 komp1 kernel: pci0: <memory, RAM> at device 0.1 (no driver attached)
May 12 11:38:29 komp1 kernel: pci0: <memory, RAM> at device 0.2 (no driver attached)
May 12 11:38:29 komp1 kernel: pci0: <memory, RAM> at device 0.3 (no driver attached)
May 12 11:38:29 komp1 kernel: pci0: <memory, RAM> at device 0.4 (no driver attached)
May 12 11:38:29 komp1 kernel: pci0: <memory, RAM> at device 0.5 (no driver attached)
May 12 11:38:29 komp1 kernel: isab0: <PCI-ISA bridge> at device 1.0 on pci0
May 12 11:38:29 komp1 kernel: isa0: <ISA bus> on isab0
May 12 11:38:29 komp1 kernel: pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
May 12 11:38:29 komp1 kernel: ohci0: <OHCI (generic) USB controller> mem 0xe8003000-0xe8003fff irq 20 at device 2.0 on pci0
May 12 11:38:29 komp1 kernel: ohci0: [GIANT-LOCKED]
May 12 11:38:29 komp1 kernel: ohci0: [ITHREAD]
May 12 11:38:29 komp1 kernel: usb0: OHCI version 1.0, legacy support
May 12 11:38:29 komp1 kernel: usb0: <OHCI (generic) USB controller> on ohci0
May 12 11:38:29 komp1 kernel: usb0: USB revision 1.0
May 12 11:38:29 komp1 kernel: uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
May 12 11:38:29 komp1 kernel: uhub0: 4 ports with 4 removable, self powered
May 12 11:38:29 komp1 kernel: ohci1: <OHCI (generic) USB controller> mem 0xe8004000-0xe8004fff irq 21 at device 2.1 on pci0
May 12 11:38:29 komp1 kernel: ohci1: [GIANT-LOCKED]
May 12 11:38:29 komp1 kernel: ohci1: [ITHREAD]
May 12 11:38:29 komp1 kernel: usb1: OHCI version 1.0, legacy support
May 12 11:38:29 komp1 kernel: usb1: <OHCI (generic) USB controller> on ohci1
May 12 11:38:29 komp1 kernel: usb1: USB revision 1.0
May 12 11:38:29 komp1 kernel: uhub1: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
May 12 11:38:29 komp1 kernel: uhub1: 4 ports with 4 removable, self powered
May 12 11:38:29 komp1 kernel: ehci0: <NVIDIA nForce2 Ultra 400 USB 2.0 controller> mem 0xe8005000-0xe80050ff irq 20 at device 2.2 on pci0
May 12 11:38:29 komp1 kernel: ehci0: [GIANT-LOCKED]
May 12 11:38:29 komp1 kernel: ehci0: [ITHREAD]
May 12 11:38:29 komp1 kernel: usb2: EHCI version 1.0
May 12 11:38:29 komp1 kernel: usb2: companion controllers, 4 ports each: usb0 usb1
May 12 11:38:29 komp1 kernel: usb2: <NVIDIA nForce2 Ultra 400 USB 2.0 controller> on ehci0
May 12 11:38:29 komp1 kernel: usb2: USB revision 2.0
May 12 11:38:29 komp1 kernel: uhub2: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
May 12 11:38:29 komp1 kernel: uhub2: 8 ports with 8 removable, self powered
May 12 11:38:29 komp1 kernel: uhub3: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2> on uhub2
May 12 11:38:29 komp1 kernel: uhub3: multiple transaction translators
May 12 11:38:29 komp1 kernel: uhub3: 4 ports with 4 removable, self powered
May 12 11:38:29 komp1 kernel: pci0: <multimedia, audio> at device 6.0 (no driver attached)
May 12 11:38:29 komp1 kernel: pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
May 12 11:38:29 komp1 kernel: pci1: <ACPI PCI bus> on pcib1
May 12 11:38:29 komp1 kernel: rl0: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem 0xe7000000-0xe70000ff irq 18 at device 6.0 on pci1
May 12 11:38:29 komp1 kernel: miibus0: <MII bus> on rl0
May 12 11:38:29 komp1 kernel: rlphy0: <RealTek internal media interface> PHY 0 on miibus0
May 12 11:38:29 komp1 kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
May 12 11:38:29 komp1 kernel: rl0: Ethernet address: 00:30:4f:50:ed:11
May 12 11:38:29 komp1 kernel: rl0: [ITHREAD]
May 12 11:38:29 komp1 kernel: rl1: <RealTek 8139 10/100BaseTX> port 0x9400-0x94ff mem 0xe7001000-0xe70010ff irq 16 at device 11.0 on pci1
May 12 11:38:29 komp1 kernel: miibus1: <MII bus> on rl1
May 12 11:38:29 komp1 kernel: rlphy1: <RealTek internal media interface> PHY 0 on miibus1
May 12 11:38:29 komp1 kernel: rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
May 12 11:38:29 komp1 kernel: rl1: Ethernet address: 00:0f:ea:c9:f0:5a
May 12 11:38:29 komp1 kernel: rl1: [ITHREAD]
May 12 11:38:29 komp1 kernel: atapci0: <nVidia nForce2 Pro UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 9.0 on pci0
May 12 11:38:29 komp1 kernel: ata0: <ATA channel 0> on atapci0
May 12 11:38:29 komp1 kernel: ata0: [ITHREAD]
May 12 11:38:29 komp1 kernel: ata1: <ATA channel 1> on atapci0
May 12 11:38:29 komp1 kernel: ata1: [ITHREAD]
May 12 11:38:29 komp1 kernel: atapci1: <nVidia nForce2 Pro SATA150 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe400-0xe40f,0xe800-0xe87f irq 22 at device 11.0 on pci0
May 12 11:38:29 komp1 kernel: atapci1: [ITHREAD]
May 12 11:38:29 komp1 kernel: ata2: <ATA channel 0> on atapci1
May 12 11:38:29 komp1 kernel: ata2: [ITHREAD]
May 12 11:38:29 komp1 kernel: ata3: <ATA channel 1> on atapci1
May 12 11:38:29 komp1 kernel: ata3: [ITHREAD]
May 12 11:38:29 komp1 kernel: pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
May 12 11:38:29 komp1 kernel: pci2: <ACPI PCI bus> on pcib2
May 12 11:38:29 komp1 kernel: vgapci0: <VGA-compatible display> port 0xa000-0xa0ff mem 0xd0000000-0xdfffffff,0xe5000000-0xe500ffff irq 19 at device 0.0 on pci2
May 12 11:38:29 komp1 kernel: fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
May 12 11:38:29 komp1 kernel: fdc0: [FILTER]
May 12 11:38:29 komp1 kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
May 12 11:38:29 komp1 kernel: sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
May 12 11:38:29 komp1 kernel: sio0: type 16550A
May 12 11:38:29 komp1 kernel: sio0: [FILTER]
May 12 11:38:29 komp1 kernel: sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
May 12 11:38:29 komp1 kernel: sio1: type 16550A
May 12 11:38:29 komp1 kernel: sio1: [FILTER]
May 12 11:38:29 komp1 kernel: atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
May 12 11:38:29 komp1 kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
May 12 11:38:29 komp1 kernel: kbd0 at atkbd0
May 12 11:38:29 komp1 kernel: atkbd0: [GIANT-LOCKED]
May 12 11:38:29 komp1 kernel: atkbd0: [ITHREAD]
May 12 11:38:29 komp1 kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
May 12 11:38:29 komp1 kernel: psm0: [GIANT-LOCKED]
May 12 11:38:29 komp1 kernel: psm0: [ITHREAD]
May 12 11:38:29 komp1 kernel: psm0: model IntelliMouse, device ID 3
May 12 11:38:29 komp1 kernel: pmtimer0 on isa0
May 12 11:38:29 komp1 kernel: orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff pnpid ORM0000 on isa0
May 12 11:38:29 komp1 kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
May 12 11:38:29 komp1 kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
May 12 11:38:29 komp1 kernel: ppc0: FIFO with 16/16/16 bytes threshold
May 12 11:38:29 komp1 kernel: ppbus0: <Parallel port bus> on ppc0
May 12 11:38:29 komp1 kernel: ppbus0: [ITHREAD]
May 12 11:38:29 komp1 kernel: plip0: <PLIP network interface> on ppbus0
May 12 11:38:29 komp1 kernel: lpt0: <Printer> on ppbus0
May 12 11:38:29 komp1 kernel: lpt0: Interrupt-driven port
May 12 11:38:29 komp1 kernel: ppi0: <Parallel I/O> on ppbus0
May 12 11:38:29 komp1 kernel: ppc0: [GIANT-LOCKED]
May 12 11:38:29 komp1 kernel: ppc0: [ITHREAD]
May 12 11:38:29 komp1 kernel: sc0: <System console> at flags 0x100 on isa0
May 12 11:38:29 komp1 kernel: sc0: VGA <16 virtual consoles, flags=0x300>
May 12 11:38:29 komp1 kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
May 12 11:38:29 komp1 kernel: Timecounter "TSC" frequency 1660384421 Hz quality 800
May 12 11:38:29 komp1 kernel: Timecounters tick every 1.000 msec
May 12 11:38:29 komp1 kernel: hptrr: no controller detected.
May 12 11:38:29 komp1 kernel: ad0: 114472MB <Seagate ST3120026A 3.06> at ata0-master UDMA100
May 12 11:38:29 komp1 kernel: ad1: 238474MB <Seagate ST3250620A 3.AAD> at ata0-slave UDMA100
May 12 11:38:29 komp1 kernel: acd0: DVDR <HL-DT-ST DVDRAM GSA-4167B/DL10> at ata1-master UDMA33
May 12 11:38:29 komp1 kernel: acd1: DVDROM <HL-DT-STDVD-ROM GDR8162B/0015> at ata1-slave UDMA33
May 12 11:38:29 komp1 kernel: ad6: 190782MB <Seagate ST3200820AS 3.AAD> at ata3-master SATA150
May 12 11:38:29 komp1 kernel: Trying to mount root from ufs:/dev/ad6s1a
May 12 11:38:29 komp1 savecore: reboot after panic: vm_fault: fault on nofault entry, addr: e56e8000
May 12 11:38:29 komp1 savecore: writing core to vmcore.2
May 12 11:38:30 komp1 kernel: rl0: link state changed to UP
--Boundary-00=_uECKIwjqJhaQwyw
Content-Type: text/plain;
charset="us-ascii";
name="xorg.conf.new"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="xorg.conf.new"
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/local/share/X11/rgb"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/local/lib/X11/fonts/misc/"
FontPath "/usr/local/lib/X11/fonts/TTF/"
FontPath "/usr/local/lib/X11/fonts/OTF"
FontPath "/usr/local/lib/X11/fonts/Type1/"
FontPath "/usr/local/lib/X11/fonts/100dpi/"
FontPath "/usr/local/lib/X11/fonts/75dpi/"
EndSection
Section "Module"
Load "extmod"
Load "record"
Load "dbe"
Load "glx"
Load "GLcore"
Load "xtrap"
Load "dri"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 380 300 # mm
Identifier "Monitor0"
VendorName "PHL"
ModelName "Philips 190P"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV280 [Radeon 9200 SE]"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
--Boundary-00=_uECKIwjqJhaQwyw--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200805121251.26443.cblasius>