Date: Tue, 15 Jul 2008 11:24:35 +0400 From: Sergey G Nasonov <snasonov@bcc.ru> To: freebsd-current@freebsd.org Subject: ATA subsystem lost drive after resume process Message-ID: <200807151124.36621.snasonov@bcc.ru>
next in thread | raw e-mail | index | archive | help
--Boundary-00=_0CFfI8Kngt7vqOP
Content-Type: text/plain;
charset="koi8-r"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Hello all.
I have a laptop Lenovo T61 with a FreeBSD current installed on it.
uname -a
FreeBSD snasonovnbwxp.bcc 8.0-CURRENT FreeBSD 8.0-CURRENT #9: Mon Jul 14
17:00:33 MSD 2008
snasonov@snasonovnbwxp.bcc:/usr/current/src/sys/i386/compile/CUSTOM i386
I want to understand why suspend/resume does not work. Suspend process works
fine, but resume lead to hang. LCD screen after resume process remains
black. At first I compile minimal CUSTOM kernel without USB support. And
disabled SMP support through sysctl variable
kern.smp.disabled=1
Also hw.acpi.reset_video was set to 1 to properly initialise LCD screen.
After resume I can view folowing:
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=80 ostat=00
ata0: stat0=0x00 er=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices 0x10000
ata0: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask =00 ostat0=ff ostat1=ff
ata1: reiniting done ..
ata2: reiniting channel ..
ata2: SATA connect time=0ms
ata2: BUSY wait time =1ms
ata2: SIGNATURE:ffffffff
ata2: No signature, assuming disk device
ata2: ahci_reset devices=00000001
em0: Link is up 100 Mbps Full duplex
ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing
request directly
ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing
request directly
ad4: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing
request directly
ad4: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing
request directly
ad4: WARNING - SET_MULTI taskqueue timeout - completing request directly
ata2: reinit done
ata3: reiniting channel ..
ata3: port not implemented
ata3: reinit done ..
ata4: reiniting channel ..
ata4: SATA connect status=00000000
ata4: phy reset found no device
ata4: reinit done ..
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
battery0: battery initialization start
battery0: battery initialization done, tried 1 times
ata2: reiniting channel ..
ata2: SATA connect time=0ms
ata2: BUSY wait time =1ms
ata2: SIGNATURE:00000101
ata2: ahci_reset devices=00000001
ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing
request directly
ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing
request directly
ad4: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing
request directly
ad4: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing
request directly
ad4: WARNING - SET_MULTI taskqueue timeout - completing request directly
...
I disabled DMA and cache write but problem remains.
sysctl hw.ata
hw.ata.setmax: 0
hw.ata.wc: 0
hw.ata.atapi_dma: 0
hw.ata.ata_dma: 0
I wrote this log from a screen, because disk subsystem does not save any data
to disk. So the basic issue preventing normal suspend/resume process on
modern Lenovo laptops is ata subsystem. Does anyone can help with this
problem? I can test any path or provide additional info.
verbose dmesg and pciconf -lv is attached
Thanks,
Sergey
--Boundary-00=_0CFfI8Kngt7vqOP
Content-Type: text/plain;
charset="koi8-r";
name="dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="dmesg"
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #9: Mon Jul 14 17:00:33 MSD 2008
snasonov@snasonovnbwxp.bcc:/usr/current/src/sys/i386/compile/CUSTOM
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e09000.
Preloaded elf module "/boot/kernel/acpi_video.ko" at 0xc0e09250.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e09300.
Preloaded elf module "/boot/kernel/ichwd.ko" at 0xc0e093ac.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1795516668 Hz
CPU: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz (1795.52-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
2nd-level cache: 2-MB, 8-way set associative, 64-byte line size
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line
real memory = 1030422528 (982 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001025000 - 0x000000003c613fff, 996077568 bytes (243183 pages)
avail memory = 995643392 (949 MB)
Table 'FACP' at 0x3d6bb900
Table 'SSDT' at 0x3d6bbab4
Table 'ECDT' at 0x3d6cbbee
Table 'TCPA' at 0x3d6cbc40
Table 'APIC' at 0x3d6cbc72
MADT: Found table at 0x3d6cbc72
MP Configuration Table version 1.4 found at 0xc009dda1
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
ACPI APIC Table: <LENOVO TP-7L >
bios32: Found BIOS32 Service Directory header at 0xc00f6880
bios32: Entry = 0xfdc60 (c00fdc60) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfdbf0+0x1b7
pnpbios: Found PnP BIOS data at 0xc00f6920
pnpbios: Entry = f0000:b821 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
WARNING: Non-uniform processors.
WARNING: Using suboptimal topology.
ULE: setup cpu 0
ACPI: RSDP @ 0x0xf68d0/0x0024 (v 2 LENOVO)
ACPI: XSDT @ 0x0x3d6bb77f/0x0094 (v 1 LENOVO TP-7L 0x00002170 LTP 0x00000000)
ACPI: FACP @ 0x0x3d6bb900/0x00F4 (v 3 LENOVO TP-7L 0x00002170 LNVO 0x00000001)
ACPI Warning (tbfadt-0505): Optional field "Gpe1Block" has zero address or length: 0 102C/0 [20070320]
ACPI: DSDT @ 0x0x3d6bbd1d/0xFED1 (v 1 LENOVO TP-7L 0x00002170 MSFT 0x03000000)
ACPI: FACS @ 0x0x3d6e4000/0x0040
ACPI: SSDT @ 0x0x3d6bbab4/0x0269 (v 1 LENOVO TP-7L 0x00002170 MSFT 0x03000000)
ACPI: ECDT @ 0x0x3d6cbbee/0x0052 (v 1 LENOVO TP-7L 0x00002170 LNVO 0x00000001)
ACPI: TCPA @ 0x0x3d6cbc40/0x0032 (v 2 LENOVO TP-7L 0x00002170 LNVO 0x00000001)
ACPI: APIC @ 0x0x3d6cbc72/0x0068 (v 1 LENOVO TP-7L 0x00002170 LNVO 0x00000001)
ACPI: MCFG @ 0x0x3d6cbcda/0x003C (v 1 LENOVO TP-7L 0x00002170 LNVO 0x00000001)
ACPI: HPET @ 0x0x3d6cbd16/0x0038 (v 1 LENOVO TP-7L 0x00002170 LNVO 0x00000001)
ACPI: SLIC @ 0x0x3d6cbdf0/0x0176 (v 1 LENOVO TP-7L 0x00002170 LTP 0x00000000)
ACPI: BOOT @ 0x0x3d6cbf66/0x0028 (v 1 LENOVO TP-7L 0x00002170 LTP 0x00000001)
ACPI: ASF! @ 0x0x3d6cbf8e/0x0072 (v 16 LENOVO TP-7L 0x00002170 PTL 0x00000001)
ACPI: SSDT @ 0x0x3d6e2697/0x025F (v 1 LENOVO TP-7L 0x00002170 INTL 0x20050513)
ACPI: SSDT @ 0x0x3d6e28f6/0x00A6 (v 1 LENOVO TP-7L 0x00002170 INTL 0x20050513)
ACPI: SSDT @ 0x0x3d6e299c/0x04F7 (v 1 LENOVO TP-7L 0x00002170 INTL 0x20050513)
ACPI: SSDT @ 0x0x3d6e2e93/0x01D8 (v 1 LENOVO TP-7L 0x00002170 INTL 0x20050513)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
nfslock: pseudo-device
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
ichwd module loaded
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Jul 11 2008 17:39:52)
npx0: INT 16 interface
acpi0: <LENOVO TP-7L> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> port 0x62,0x66 on acpi0
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa04
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=2a008086)
pcibios: BIOS version 3.00
AcpiOsDerivePciId: \\_SB_.PCI0.MHCS -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.EHC0.U7CS -> bus 0 dev 29 func 7
AcpiOsDerivePciId: \\_SB_.PCI0.EHC1.U8CS -> bus 0 dev 26 func 7
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc3ce7000 pa 0x1000
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.LPCS -> bus 0 dev 31 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3df00000 (3) failed
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11
Validation 0 10 N 0 3 4 5 6 7 9 10 11
After Disable 0 255 N 0 3 4 5 6 7 9 10 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11
Validation 0 11 N 0 3 4 5 6 7 9 10 11
After Disable 0 255 N 0 3 4 5 6 7 9 10 11
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11
Validation 0 11 N 0 3 4 5 6 7 9 10 11
After Disable 0 255 N 0 3 4 5 6 7 9 10 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11
Validation 0 11 N 0 3 4 5 6 7 9 10 11
After Disable 0 255 N 0 3 4 5 6 7 9 10 11
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11
Validation 0 11 N 0 3 4 5 6 7 9 10 11
After Disable 0 255 N 0 3 4 5 6 7 9 10 11
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11
Validation 0 11 N 0 3 4 5 6 7 9 10 11
After Disable 0 255 N 0 3 4 5 6 7 9 10 11
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11
Validation 0 11 N 0 3 4 5 6 7 9 10 11
After Disable 0 255 N 0 3 4 5 6 7 9 10 11
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11
Validation 0 11 N 0 3 4 5 6 7 9 10 11
After Disable 0 255 N 0 3 4 5 6 7 9 10 11
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x2a00, revid=0x0c
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2a02, revid=0x0c
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 64, base 0xf8100000, size 20, enabled
map[18]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled
map[20]: type I/O Port, range 32, base 0x1800, size 3, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2a03, revid=0x0c
domain=0, bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xf8200000, size 20, enabled
found-> vendor=0x8086, dev=0x1049, revid=0x03
domain=0, bus=0, slot=25, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfe000000, size 17, enabled
map[14]: type Memory, range 32, base 0xfe025000, size 12, enabled
map[18]: type I/O Port, range 32, base 0x1840, size 5, enabled
pcib0: matched entry for 0.25.INTA
pcib0: slot 25 INTA hardwired to IRQ 20
found-> vendor=0x8086, dev=0x2834, revid=0x03
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 20
found-> vendor=0x8086, dev=0x2835, revid=0x03
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x283a, revid=0x03
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfe226c00, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 22
found-> vendor=0x8086, dev=0x284b, revid=0x03
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfe020000, size 14, enabled
pcib0: matched entry for 0.27.INTB
pcib0: slot 27 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x283f, revid=0x03
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 20
found-> vendor=0x8086, dev=0x2841, revid=0x03
domain=0, bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x2843, revid=0x03
domain=0, bus=0, slot=28, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 22
found-> vendor=0x8086, dev=0x2845, revid=0x03
domain=0, bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2847, revid=0x03
domain=0, bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 20
found-> vendor=0x8086, dev=0x2830, revid=0x03
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type I/O Port, range 32, base 0x18a0, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2831, revid=0x03
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type I/O Port, range 32, base 0x18c0, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x2832, revid=0x03
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type I/O Port, range 32, base 0x18e0, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x2836, revid=0x03
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfe227000, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2448, revid=0xf3
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0005, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2811, revid=0x03
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2850, revid=0x03
domain=0, bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
map[20]: type I/O Port, range 32, base 0x1c00, size 4, enabled
found-> vendor=0x8086, dev=0x2829, revid=0x03
domain=0, bus=0, slot=31, func=2
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 4 messages
map[10]: type I/O Port, range 32, base 0x1c50, size 3, enabled
map[14]: type I/O Port, range 32, base 0x1c44, size 2, enabled
map[18]: type I/O Port, range 32, base 0x1c48, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x1c40, size 2, enabled
map[20]: type I/O Port, range 32, base 0x1c20, size 5, enabled
map[24]: type Memory, range 32, base 0xfe226000, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x283e, revid=0x03
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type Memory, range 32, base 0xfe227400, size 8, enabled
map[20]: type I/O Port, range 32, base 0x1c60, size 5, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 23
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf8100000-0xf81fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xe0000000
vgapci0: Reserved 0x100000 bytes for rid 0x10 type 3 at 0xf8100000
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
acpi_video0: <ACPI video extension> on vgapci0
found Internal/Integrated Digital Flat Panel(400), idx#0, port#0, head #0
found VGA CRT or VESA Compatible Analog Monitor(100), idx#0, port#0, head #0
found External Digital Monitor(300), idx#0, port#0, head #0
vgapci1: <VGA-compatible display> mem 0xf8200000-0xf82fffff at device 2.1 on pci0
em0: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0x1840-0x185f mem 0xfe000000-0xfe01ffff,0xfe025000-0xfe025fff irq 20 at device 25.0 on pci0
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfe000000
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to vector 49
em0: using IRQ 256 for MSI
em0: Using MSI interrupt
em0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xfe025000
em0: [FILTER]
em0: bpf attached
em0: Ethernet address: 00:1a:6b:36:6d:49
pci0: <serial bus, USB> at device 26.0 (no driver attached)
pci0: <serial bus, USB> at device 26.1 (no driver attached)
pci0: <serial bus, USB> at device 26.7 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pcib1: domain 0
pcib1: secondary bus 2
pcib1: subordinate bus 2
pcib1: I/O decode 0x2000-0x2fff
pcib1: memory decode 0xfc000000-0xfdffffff
pcib1: prefetched decode 0xf8000000-0xf80fffff
pci2: <ACPI PCI bus> on pcib1
pci2: domain=0, physical bus=2
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pcib2: domain 0
pcib2: secondary bus 3
pcib2: subordinate bus 3
pcib2: I/O decode 0x3000-0x3fff
pcib2: memory decode 0xdc000000-0xdf3fffff
pcib2: prefetched decode 0xdfe00000-0xdfefffff
pci3: <ACPI PCI bus> on pcib2
pci3: domain=0, physical bus=3
found-> vendor=0x8086, dev=0x4227, revid=0x02
domain=0, bus=3, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xdf3ff000, size 12, enabled
pcib2: requested memory range 0xdf3ff000-0xdf3fffff: good
pcib2: matched entry for 3.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 17
pci3: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pcib3: domain 0
pcib3: secondary bus 4
pcib3: subordinate bus 4
pcib3: I/O decode 0x4000-0x4fff
pcib3: memory decode 0xd8000000-0xd9ffffff
pcib3: prefetched decode 0xdfb00000-0xdfbfffff
pci4: <ACPI PCI bus> on pcib3
pci4: domain=0, physical bus=4
pcib4: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pcib4: domain 0
pcib4: secondary bus 5
pcib4: subordinate bus 12
pcib4: I/O decode 0x5000-0x5fff
pcib4: memory decode 0xd4000000-0xd5ffffff
pcib4: prefetched decode 0xdf800000-0xdf8fffff
pci5: <ACPI PCI bus> on pcib4
pci5: domain=0, physical bus=5
pcib5: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0
pcib5: domain 0
pcib5: secondary bus 13
pcib5: subordinate bus 20
pcib5: I/O decode 0x6000-0x6fff
pcib5: memory decode 0xd0000000-0xd1ffffff
pcib5: prefetched decode 0xdf500000-0xdf5fffff
pci13: <ACPI PCI bus> on pcib5
pci13: domain=0, physical bus=13
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib6: domain 0
pcib6: secondary bus 21
pcib6: subordinate bus 24
pcib6: I/O decode 0x7000-0xafff
pcib6: no prefetched decode
pcib6: Subtractively decoded bridge.
pci21: <ACPI PCI bus> on pcib6
pci21: domain=0, physical bus=21
found-> vendor=0x1180, dev=0x0476, revid=0xb6
domain=0, bus=21, slot=0, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf8300000, size 12, enabled
pcib6: requested memory range 0xf8300000-0xf8300fff: good
pcib6: matched entry for 21.0.INTA
pcib6: slot 0 INTA hardwired to IRQ 16
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xf8300000-0xf8300fff irq 16 at device 0.0 on pci21
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8300000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 50
cbb0: [MPSAFE]
cbb0: [ITHREAD]
cbb0: PCI Configuration space:
0x00: 0x04761180 0x02100007 0x060700b6 0x00822000
0x10: 0xf8300000 0x020000dc 0xb0181615 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07000110
0x40: 0x20c417aa 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x04a00001 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x01000000 0x00f00000 0x00000000
0xb0: 0x00000000 0xfe000000 0x00003000 0x00000000
0xc0: 0x20c417aa 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c00-0x1c0f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1c00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
ata1: [ITHREAD]
atapci1: <Intel (ID=28298086) AHCI controller> port 0x1c50-0x1c57,0x1c44-0x1c47,0x1c48-0x1c4f,0x1c40-0x1c43,0x1c20-0x1c3f mem 0xfe226000-0xfe2267ff irq 16 at device 31.2 on pci0
atapci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1c20
atapci1: Reserved 0x800 bytes for rid 0x24 type 3 at 0xfe226000
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 3 ports PM not supported
ata2: <ATA channel 0> on atapci1
ata2: SATA connect time=0ms
ata2: BUSY wait time=1ms
ata2: SIGNATURE: 00000101
ata2: ahci_reset devices=00000001
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: port not implemented
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: SATA connect status=00000000
ata4: phy reset found no device
ata4: [MPSAFE]
ata4: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 2 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0x3d6e1b32/0x0282 (v 1 PmRef Cpu0Ist 0x00000100 INTL 0x20050513)
ACPI: SSDT @ 0x0x3d6e1e39/0x085E (v 1 PmRef Cpu0Cst 0x00000100 INTL 0x20050513)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 53
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 54
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ahc_isa_probe 1: ioport 0x1c00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xe0000-0xeffff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port found at 0x3bc
ppc0: using extended I/O port range
ppc0: <Parallel port> failed to probe at port 0x3bc-0x3c3 irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x4e01 0x4e01 0x4e01 0x4e01
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x4e01 0x4e01 0x4e01 0x4e01
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x4e01 0x4e01 0x4e01 0x4e01
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 99750936 hz
Timecounter "TSC" frequency 1795516668 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata0: identify ch->devices=00010000
battery0: battery initialization start
acpi_acad0: acline initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on ICH8M chip
battery0: battery initialization done, tried 1 times
acd0: <HL-DT-ST DVDacpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
RAM GSA-U10N/1.05> DVDR drive at ata0 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1: identify ch->devices=00000000
ata2: identify ch->devices=00000001
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad4: 114473MB <HITACHI HTS541612J9SA00 SBDIC7JP> at ata2-master SATA150
ad4: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3: identify ch->devices=00000000
ata4: identify ch->devices=00000000
ATA PseudoRAID loaded
WARNING: WITNESS option enabled, expect reduced performance.
GEOM_LABEL: Label for provider ad4s1 is ntfs/Preload.
GEOM_LABEL: Label for provider ad4s2 is msdosfs/SERVICEV001.
lock order reversal: (sleepable after non-sleepable)
1st 0xc43ed01c struct mount mtx (struct mount mtx) @ kern/vfs_subr.c:343
2nd 0xc43ed000 vfslock (vfslock) @ kern/vfs_subr.c:370
KDB: stack backtrace:
db_trace_self_wrapper(c0acfd21,c3cefb64,c07693ee,c0ad255e,c43ed000,...) at db_trace_self_wrapper+0x26
kdb_backtrace(c0ad255e,c43ed000,c0ad8340,c0ad8340,c0ad88ee,...) at kdb_backtrace+0x29
witness_checkorder(c43ed000,1,c0ad88e5,172,c0c0acb4,...) at witness_checkorder+0x6de
__lockmgr_args(c43ed000,200100,c43ed01c,0,0,...) at __lockmgr_args+0x230
vfs_busy(c43ed000,200,0,c40a4d20,1,...) at vfs_busy+0x1bc
vfs_mount_alloc(0,c0b92020,c0ad868b,c40a4d20,c07a6f80,...) at vfs_mount_alloc+0x78
vfs_mountroot(c0bfddf0,4,c0ac7874,264,0,...) at vfs_mountroot+0x26c
start_init(0,c3cefd38,c0ac9207,322,c40a2d0c,...) at start_init+0x65
fork_exit(c06f1df0,0,c3cefd38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xc3cefd70, ebp = 0 ---
lock order reversal: (sleepable after non-sleepable)
1st 0xc4297e10 vnode interlock (vnode interlock) @ fs/devfs/devfs_vnops.c:288
2nd 0xc4297df4 devfs (devfs) @ kern/vfs_subr.c:2044
KDB: stack backtrace:
db_trace_self_wrapper(c0acfd21,c3cefa8c,c07693ee,c0ad255e,c4297df4,...) at db_trace_self_wrapper+0x26
kdb_backtrace(c0ad255e,c4297df4,c0ac3252,c0ac3252,c0ad88ee,...) at kdb_backtrace+0x29
witness_checkorder(c4297df4,9,c0ad88e5,7fc,c4297df4,...) at witness_checkorder+0x6de
__lockmgr_args(c4297df4,80100,c4297e10,0,0,...) at __lockmgr_args+0x777
vop_stdlock(c3cefb8c,c0ac3409,c0ac6555,80100,c4297d9c,...) at vop_stdlock+0x62
VOP_LOCK1_APV(c0b92100,c3cefb8c,c0bd0ce0,c4297d9c,80100,...) at VOP_LOCK1_APV+0xa5
_vn_lock(c4297d9c,80100,c0ad88e5,7fc,c0ac3400,...) at _vn_lock+0x5e
vget(c4297d9c,80100,c40a4d20,121,c0ac33a1,...) at vget+0x9c
devfs_allocv(c43c4980,c43ed000,c3cefc20,c40a4d20,c40a4dc4,...) at devfs_allocv+0x11a
devfs_root(c43ed000,80000,c0c52a74,c40a4d20,4,...) at devfs_root+0x51
set_rootvnode(c0c52a60,0,c0ad8246,5f1,c07a6f80,...) at set_rootvnode+0x2d
vfs_mountroot(c0bfddf0,4,c0ac7874,264,0,...) at vfs_mountroot+0x34c
start_init(0,c3cefd38,c0ac9207,322,c40a2d0c,...) at start_init+0x65
fork_exit(c06f1df0,0,c3cefd38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xc3cefd70, ebp = 0 ---
Trying to mount root from ufs:/dev/ad4s3a
ct_to_ts([2008-07-15 11:10:03]) = 1216120203.000000000
lock order reversal: (sleepable after non-sleepable)
1st 0xc4297b20 bufobj interlock (bufobj interlock) @ kern/vfs_bio.c:2442
2nd 0xd7ebec80 bufwait (bufwait) @ kern/vfs_bio.c:2456
KDB: stack backtrace:
db_trace_self_wrapper(c0acfd21,c3cef784,c07693ee,c0ad255e,d7ebec80,...) at db_trace_self_wrapper+0x26
kdb_backtrace(c0ad255e,d7ebec80,c0ad722b,c0ad722b,c0ad67e7,...) at kdb_backtrace+0x29
witness_checkorder(d7ebec80,9,c0ad67de,998,c0c0acb4,...) at witness_checkorder+0x6de
__lockmgr_args(d7ebec80,81900,c4297b20,c0ad7187,50,...) at __lockmgr_args+0x777
getblk(c4297a78,0,0,800,0,...) at getblk+0x153
breadn(c4297a78,0,0,800,0,...) at breadn+0x44
bread(c4297a78,0,0,800,0,...) at bread+0x4c
ffs_blkatoff(c4297a78,0,0,0,c3cef9a4,...) at ffs_blkatoff+0xd1
ufs_lookup(c3cef9e8,c4297a78,c3cefb38,c4297a78,c3cefa08,...) at ufs_lookup+0x2e6
VOP_CACHEDLOOKUP_APV(c0bb8e60,c3cef9e8,c3cefb38,c3cefb24,c406f500,...) at VOP_CACHEDLOOKUP_APV+0xa5
vfs_cache_lookup(c3cefa68,c3cefa68,500000c,80000,c4297a78,...) at vfs_cache_lookup+0xd0
VOP_LOOKUP_APV(c0bb8e60,c3cefa68,c0ad7ff8,1b0,c3cefb24,...) at VOP_LOOKUP_APV+0xa5
lookup(c3cefb0c,c0ad7ff8,d8,c0,c406f62c,...) at lookup+0x57e
namei(c3cefb0c,c3cefb24,c0768bcc,c0ad8340,c0ad8687,...) at namei+0x44b
kern_unlinkat(c40a4d20,ffffff9c,c0ad8687,1,c3cefc5c,...) at kern_unlinkat+0x46
kern_unlink(c40a4d20,c0ad8687,1,62c,0,...) at kern_unlink+0x27
vfs_mountroot_try(c0ad8841,c0ac6557,c0ad868c,1,c07a6f80,...) at vfs_mountroot_try+0x482
vfs_mountroot(c0bfddf0,4,c0ac7874,264,0,...) at vfs_mountroot+0x40e
start_init(0,c3cefd38,c0ac9207,322,c40a2d0c,...) at start_init+0x65
fork_exit(c06f1df0,0,c3cefd38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xc3cefd70, ebp = 0 ---
start_init: trying /sbin/init
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
em0: Link is up 100 Mbps Full Duplex
lock order reversal:
1st 0xc48237ac ufs (ufs) @ kern/vfs_subr.c:2044
2nd 0xc0bfca7c kernel linker (kernel linker) @ kern/kern_linker.c:693
KDB: stack backtrace:
db_trace_self_wrapper(c0acfd21,e634d6c8,c07693ee,c0ad255e,c0bfca7c,...) at db_trace_self_wrapper+0x26
kdb_backtrace(c0ad255e,c0bfca7c,c0ac9be0,c0ac9be0,c0ac9c2d,...) at kdb_backtrace+0x29
witness_checkorder(c0bfca7c,9,c0ac9c24,2b5,e634d718,...) at witness_checkorder+0x6de
_sx_xlock(c0bfca7c,0,c0ac9c24,2b5,c0ac9c2d,...) at _sx_xlock+0x7d
linker_file_lookup_set(c47c1700,c0ac9c72,e634d734,e634d730,0,...) at linker_file_lookup_set+0x4a
linker_file_register_sysctls(c0bfca7c,c0ac9c24,19d,17c,0,...) at linker_file_register_sysctls+0x2d
linker_load_module(c4833d70,0,e634d940,e634d93c,e634d938,...) at linker_load_module+0x92f
linker_load_dependencies(c47f8400,0,c4833bc0,2a4,4bc0,...) at linker_load_dependencies+0x194
link_elf_load_file(c0b9e4e0,c4244ca0,e634dc24,17c,0,...) at link_elf_load_file+0x4f0
linker_load_module(0,e634dc4c,c0ac9c24,3cd,81d67cc,...) at linker_load_module+0x8cb
kern_kldload(c43d8460,c4206000,e634dc70,0,1,...) at kern_kldload+0xc8
kldload(c43d8460,e634dcf8,4,c0ad2c79,c0b97340,...) at kldload+0x74
syscall(e634dd38) at syscall+0x2a3
Xint0x80_syscall() at Xint0x80_syscall+0x20
--- syscall (304, FreeBSD ELF32, kldload), eip = 0x28409c6b, esp = 0xbfbfe93c, ebp = 0xbfbfe948 ---
drm0: <Intel i965GM> on vgapci0
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized i915 1.5.0 20060119
drm0: [MPSAFE]
drm0: [ITHREAD]
lock order reversal:
1st 0xc45a132c filedesc structure (filedesc structure) @ kern/kern_descrip.c:1075
2nd 0xc4a09ce8 ufs (ufs) @ kern/vfs_subr.c:4022
KDB: stack backtrace:
db_trace_self_wrapper(c0acfd21,e641ca94,c07693ee,c0ad255e,c4a09ce8,...) at db_trace_self_wrapper+0x26
kdb_backtrace(c0ad255e,c4a09ce8,c0ac6e23,c0ac6e23,c0ad88ee,...) at kdb_backtrace+0x29
witness_checkorder(c4a09ce8,9,c0ad88e5,fb6,c07afd37,...) at witness_checkorder+0x6de
__lockmgr_args(c4a09ce8,80400,c4a09d04,0,0,...) at __lockmgr_args+0x777
ffs_lock(e641cb9c,e641cb88,246,80400,c4a09c90,...) at ffs_lock+0x8a
VOP_LOCK1_APV(c0bb8e60,e641cb9c,c0bd0ce0,c4a09c90,80400,...) at VOP_LOCK1_APV+0xa5
_vn_lock(c4a09c90,80400,c0ad88e5,fb6,e641cbf8,...) at _vn_lock+0x5e
vfs_knllock(c4a09c90,0,c0ac8ca3,68e,c4ae261c,...) at vfs_knllock+0x29
knlist_remove_kq(0,e641cc18,c07abd49,c4ac255c,c4ae261c,...) at knlist_remove_kq+0xad
knlist_remove(c4ac255c,c4ae261c,0,e641cc44,c0704b85,...) at knlist_remove+0x1b
filt_vfsdetach(c4ae261c,0,c0ac8ca3,75e,11,...) at filt_vfsdetach+0x39
knote_fdclose(c47f3af0,6b1,c0ac87dc,433,c4ae1540,...) at knote_fdclose+0xf5
kern_close(c47f3af0,6b1,e641cd2c,c0a4a353,c47f3af0,...) at kern_close+0xd5
close(c47f3af0,e641ccf8,4,c0ad2c65,c0b95750,...) at close+0x1a
syscall(e641cd38) at syscall+0x2a3
Xint0x80_syscall() at Xint0x80_syscall+0x20
--- syscall (6, FreeBSD ELF32, close), eip = 0x284b9893, esp = 0xbfbfe81c, ebp = 0xbfbfe838 ---
>
--Boundary-00=_0CFfI8Kngt7vqOP--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200807151124.36621.snasonov>