Date: Thu, 2 Oct 2008 17:44:25 +0900 From: Pyun YongHyeon <pyunyh@gmail.com> To: "Sergey V. Dyatko" <sergey.dyatko@gmail.com> Cc: freebsd-stable@freebsd.org Subject: Re: if_re is broken on RELENG_7 ? Message-ID: <20081002084425.GD67204@cdnetworks.co.kr> In-Reply-To: <20081002102600.45f407d2@notebook> References: <20081002102600.45f407d2@notebook>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Oct 02, 2008 at 10:26:00AM +0300, Sergey V. Dyatko wrote: > Hi list, > I have ASUS a6m laptop with integrated RTL8168/8111 PCI-E Gigabit > Ethernet NIC, long time ago (7.0-CURRENT - 7.0-prerelease) I used it. > Than I started to enjoy BCM43XX wi-fi adapter and now I recently > decided to revert to the use of realtek adapter. But it doesn't work. > I'm just not running a network card or at all does not work? > > some additional information: > ifconfig shows such information, regardless of whether the cable is > connected: > > %ifconfig re0 > re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC> > ether 00:1a:92:ca:b3:bc > media: Ethernet autoselect (10baseT/UTP <half-duplex>) > status: no carrier I don't see what's wrong in the output above. Because there is no "RUNNING" in flags field I guess you didn't up the interface. (e.g. either assign an IP address to the interface or run 'dhclient re0' if you want to get an IP address over DHCP). > > [tiger@notebook]~%pciconf -lv | grep re0 -A 4 > re0@pci0:2:0:0: class=0x020000 card=0x11f51043 chip=0x816810ec rev=0x01 > hdr=0x00 vendor = 'Realtek Semiconductor' > device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' > class = network > subclass = ethernet > dmesg output: http://tiger.byfly.by/files/dmesg.boot > kernel config: http://tiger.byfly.by/files/tiger-asus-a6m > -- Regards, Pyun YongHyeon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081002084425.GD67204>