Date: Wed, 14 Jan 2009 09:32:28 +0900 From: Pyun YongHyeon <pyunyh@gmail.com> To: FreeBSD <freebsd@optiksecurite.com> Cc: freebsd-stable@freebsd.org Subject: Re: FreeBSD 7.1 Breaks re and rl Network Interface Drivers Message-ID: <20090114003228.GA55351@cdnetworks.co.kr> In-Reply-To: <496CB0A2.2020103@optiksecurite.com> References: <8dfae1c10901070639x67945324jeeecfcac647d7976@mail.gmail.com> <8dfae1c10901071550s69d99802p31ca7c775f3d6823@mail.gmail.com> <88527079.20090111192206@donpac.ru> <20090112011146.GC46346@cdnetworks.co.kr> <496BBFF6.7010300@optiksecurite.com> <20090113004018.GG46346@cdnetworks.co.kr> <496CB0A2.2020103@optiksecurite.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Jan 13, 2009 at 10:17:54AM -0500, FreeBSD wrote: > Pyun YongHyeon a ?crit : > >On Mon, Jan 12, 2009 at 05:11:02PM -0500, FreeBSD wrote: > > > Pyun YongHyeon a ?crit : > > > >On Sun, Jan 11, 2009 at 07:22:06PM +0300, Eugene Gladchenko wrote: > > > > > Walter, > > > > > > > > > > Thursday, January 8, 2009, 2:50:40 AM, you wrote: > > > > > > > > > > WV> Booting kernel.old, which is 7.0-RELEASE-p7 completely > > alleviates > > all > > > > > WV> problems. I believe this roundly confirms that this is a bug > > in the > > > > > WV> 7.1-RELEASE re kernel drivers. > > > > > > > > > > Does kern/130011 look similar? > > > > http://www.freebsd.org/cgi/query-pr.cgi?pr=130011 > > > > > > > >Do you have RTL8168C controller? If not, it's not related with > > > >Walter's issue as 7.0-RELEASE didn't have a support for RTL8168C. > > > > > > > > > > > > > > The re driver was really broken in 7.1-RC2 and the fix didn't get > > to > > 7.1-RELEASE. > > > > > > > >If you have re(4) issues, please provide more details such as > > > >dmesg output, way to reproduce the issue etc. > > > > > > > > > > Hi, > > > > > > I have the exact same card and the exact same problem as the PR you > > > mentionned. > > > > > > re0@pci0:3:0:0: class=0x020000 card=0x02831028 chip=0x816810ec rev=0x02 > > > hdr=0x00 > > > vendor = 'Realtek Semiconductor' > > > device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' > > > class = network > > > subclass = ethernet > > > > > > > > > re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe > > > Gigabit Ethernet> port 0xd800-0xd8ff mem > > > 0xfeaff000-0xfeafffff,0xfdff0000-0xfdffffff irq 18 at device 0.0 on pci3 > > > re0: Chip rev. 0x3c000000 > > > re0: MAC rev. 0x00400000 > > > re0: PHY write failed > > > re0: PHY write failed > > > re0: MII without any phy! > > > device_attach: re0 attach returned 6 > > > > > > I tried to compile a new kernel with the latest version of the 3 files > > > listed in the PR: > > > src/sys/dev/re/if_re.c,v 1.147 2008/12/22 00:46:22 yongari > > > src/sys/pci/if_rl.c,v 1.170.2.10 2009/01/12 04:10:40 yongari > > > src/sys/pci/if_rlreg.h,v 1.67.2.16 2009/01/12 03:48:25 yongari > > > > > > >You need lastest if_rl.c and if_rlreg.h as well as if_re.c. > > > > That's exactly what I tried. Look at the 3 revision of the specified You've used if_rlreg.h in stable/7. > files. I even tried with a if_rl.c from the 22/12/08 but got the same > problem. > Use if_re.c, if_rl.h and if_rl.c in HEAD. Not all changes were MFCed. -- Regards, Pyun YongHyeon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090114003228.GA55351>