Date: Wed, 12 Aug 2009 14:21:28 +0100 From: org.freebsd.freebsd-multimedia@coreland.ath.cx To: freebsd-multimedia@freebsd.org Subject: No sound with 7.2-RELEASE amd64, Delta 66, envy24 Message-ID: <20090812132128.GA99440@logik.internal.network>
next in thread | raw e-mail | index | archive | help
Resent. List seems to have swallowed the original.
--
Hi.
I recently installed a Delta 66 PCI card (taken from a working machine)
but can get no sound from it.
Programs using the device don't give any errors.
$ kldstat
Id Refs Address Size Name
1 22 0xffffffff80100000 bd23e0 kernel
2 1 0xffffffff80cd3000 1bf0 coretemp.ko
3 2 0xffffffff80cd6000 22768 drm.ko
4 1 0xffffffff80cf9000 71570 radeon.ko
5 1 0xffffffff9be22000 8117e zfs.ko
6 1 0xffffffff9bea4000 1125 opensolaris.ko
7 1 0xffffffff9bea6000 978 pflog.ko
8 1 0xffffffff9bea7000 2ae8c pf.ko
9 1 0xffffffff9bed2000 1fce nullfs.ko
10 1 0xffffffff9bed4000 1744 fdescfs.ko
11 1 0xffffffff9bed6000 35c0 linprocfs.ko
12 1 0xffffffff9beda000 18b30 linux.ko
$ sudo kldload snd_envy24
$ kldstat
Id Refs Address Size Name
1 25 0xffffffff80100000 bd23e0 kernel
2 1 0xffffffff80cd3000 1bf0 coretemp.ko
3 2 0xffffffff80cd6000 22768 drm.ko
4 1 0xffffffff80cf9000 71570 radeon.ko
5 1 0xffffffff9be22000 8117e zfs.ko
6 1 0xffffffff9bea4000 1125 opensolaris.ko
7 1 0xffffffff9bea6000 978 pflog.ko
8 1 0xffffffff9bea7000 2ae8c pf.ko
9 1 0xffffffff9bed2000 1fce nullfs.ko
10 1 0xffffffff9bed4000 1744 fdescfs.ko
11 1 0xffffffff9bed6000 35c0 linprocfs.ko
12 1 0xffffffff9beda000 18b30 linux.ko
13 3 0xffffffff9bef3000 2e546 sound.ko
14 1 0xffffffff9bf22000 4722 snd_envy24.ko
15 1 0xffffffff9bf27000 b8a snd_spicds.ko
$ cat /dev/sndstat
FreeBSD Audio Driver (newpcm: 64bit 2007061600/amd64)
Installed devices:
pcm0: <Envy24 audio (Generic)> at io 0xac00:32,0xa880:16,0xa800:16,0xa480:64 irq 17 [MPSAFE] (5p:1v/4r:1v channels duplex default)
$ ls -alF /dev/dsp
crw-rw-rw- 1 root wheel 0, 151 Aug 12 12:42 /dev/dsp
$ mixer
Mixer vol is currently set to 75:75
Mixer bass is currently set to 0:0
Mixer treble is currently set to 0:0
Mixer synth is currently set to 0:0
Mixer pcm is currently set to 75:75
Mixer speaker is currently set to 0:0
Mixer line is currently set to 75:75
Mixer mic is currently set to 0:0
Mixer cd is currently set to 0:0
Mixer mix is currently set to 0:0
Programs appear to be able to open /dev/dsp* and use it without errors - I just
get no sound.
$ dmesg
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p2 #0: Wed Jun 24 00:14:35 UTC 2009
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (2665.04-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x106a4 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x98e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>,<b20>,<b23>>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Cores per package: 8
Logical CPUs per core: 2
usable memory = 12862390272 (12266 MB)
avail memory = 12424232960 (11848 MB)
ACPI APIC Table: <030409 APIC1411>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP/HT): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP/HT): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP/HT): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <030409 RSDT1411> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci7: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci6: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xfbee0000-0xfbeeffff irq 16 at device 0.0 on pci6
drm0: <ATI Radeon X1950> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] Initialized radeon 1.29.0 20080528
vgapci1: <VGA-compatible display> mem 0xfbef0000-0xfbefffff at device 0.1 on pci6
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci5: <ACPI PCI bus> on pcib3
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0x7400-0x741f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x7480-0x749f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x7800-0x781f irq 19 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfb9f6000-0xfb9f63ff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
uhub4: <NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, addr 2> on uhub3
uhub4: single transaction translator
uhub4: 4 ports with 4 removable, self powered
ums0: <Microsoft Basic Optical Mouse, class 0/0, rev 1.10/0.00, addr 3> on uhub4
ums0: 3 buttons and Z dir.
ukbd0: <vendor 0x046a product 0x0021, class 0/0, rev 2.00/0.20, addr 4> on uhub4
kbd2 at ukbd0
uhid0: <vendor 0x046a product 0x0021, class 0/0, rev 2.00/0.20, addr 4> on uhub4
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib4
atapci0: <JMicron JMB363 SATA300 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfbdfe000-0xfbdfffff irq 16 at device 0.0 on pci4
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfbcff000-0xfbcfffff,0xcfff0000-0xcfffffff irq 17 at device 0.0 on pci3
re0: Using 1 MSI messages
re0: Chip rev. 0x3c000000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:e0:4d:b3:5b:bd
re0: [FILTER]
pcib6: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib6
re1: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xb800-0xb8ff mem 0xfbbff000-0xfbbfffff,0xcfef0000-0xcfefffff irq 18 at device 0.0 on pci2
re1: Using 1 MSI messages
re1: Chip rev. 0x3c000000
re1: MAC rev. 0x00400000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re1: Ethernet address: 00:e0:4d:b3:5b:be
re1: [FILTER]
uhci3: <UHCI (generic) USB controller> port 0x7880-0x789f irq 23 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub5: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0x7c00-0x7c1f irq 19 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub6: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0x8000-0x801f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub7: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub7: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfb9fc000-0xfb9fc3ff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub8: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub8: 6 ports with 6 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib7
pci1: <multimedia, audio> at device 6.0 (no driver attached)
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfbaff800-0xfbafffff,0xfbaf8000-0xfbafbfff irq 19 at device 7.0 on pci1
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:00:00:00:07:7b:3d
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x198c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:00:07:7b:3d
fwe0: Ethernet address: 02:00:00:07:7b:3d
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:00:00:00:00:07:7b:3d @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH10 SATA300 controller> port 0x8c00-0x8c07,0x8880-0x8883,0x8800-0x8807,0x8480-0x8483,0x8400-0x840f,0x8080-0x808f irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata5: <ATA channel 0> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci1
ata6: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH10 SATA300 controller> port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x940f,0x9080-0x908f irq 19 at device 31.5 on pci0
atapci2: [ITHREAD]
ata7: <ATA channel 0> on atapci2
ata7: [ITHREAD]
ata8: <ATA channel 1> on atapci2
ata8: [ITHREAD]
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - 21, should be 19 [20070320]
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 14
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 14
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 14
device_attach: est5 attach returned 6
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 14
device_attach: est7 attach returned 6
p4tcc7: <CPU Frequency Thermal Control> on cpu7
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acd0: DVDR <TSSTcorp CDDVDW SH-S222A/SB01> at ata4-master UDMA66
ad10: 76319MB <WDC WD800AAJS-00WAA0 58.01D58> at ata5-master SATA300
ad11: 476940MB <WDC WD5001AALS-00L3B2 01.03B01> at ata5-slave SATA300
ad12: 953869MB <WDC WD10EADS-00L5B1 01.01A01> at ata6-master SATA300
ad14: 476940MB <WDC WD5001AALS-00L3B2 01.03B01> at ata7-master SATA300
GEOM_LABEL: Label for provider ad10s1a is ufsid/49dd1626d599346c.
ad16: 476940MB <WDC WD5001AALS-00L3B2 01.03B01> at ata8-master SATA300
GEOM_LABEL: Label for provider ad10s1d is ufsid/49dd1626c888923e.
GEOM_LABEL: Label for provider ad10s1e is ufsid/49dd16280e8a20d0.
GEOM_LABEL: Label for provider ad10s1f is ufsid/49dd1626ed87573c.
SMP: AP CPU #7 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #2 Launched!
Trying to mount root from ufs:/dev/ad10s1a
GEOM_LABEL: Label ufsid/49dd1626d599346c removed.
GEOM_LABEL: Label for provider ad10s1a is ufsid/49dd1626d599346c.
GEOM_LABEL: Label ufsid/49dd1626c888923e removed.
GEOM_LABEL: Label for provider ad10s1d is ufsid/49dd1626c888923e.
GEOM_LABEL: Label ufsid/49dd1626ed87573c removed.
GEOM_LABEL: Label for provider ad10s1f is ufsid/49dd1626ed87573c.
GEOM_LABEL: Label ufsid/49dd16280e8a20d0 removed.
GEOM_LABEL: Label for provider ad10s1e is ufsid/49dd16280e8a20d0.
GEOM_LABEL: Label ufsid/49dd1626d599346c removed.
GEOM_LABEL: Label ufsid/49dd1626c888923e removed.
GEOM_LABEL: Label ufsid/49dd1626ed87573c removed.
GEOM_LABEL: Label ufsid/49dd16280e8a20d0 removed.
This module (opensolaris) contains code covered by the
Common Development and Distribution License (CDDL)
see http://opensolaris.org/os/licensing/opensolaris_license/
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
ZFS filesystem version 6
ZFS storage pool version 6
GEOM_LABEL: Label for provider md0 is ufsid/4a218edd32239127.
GEOM_LABEL: Label ufsid/4a218edd32239127 removed.
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R500 Microcode
info: [drm] Num pipes: 3
info: [drm] writeback test succeeded in 1 usecs
drm0: [ITHREAD]
info: [drm] Num pipes: 3
info: [drm] Loading R500 Microcode
info: [drm] Num pipes: 3
info: [drm] Num pipes: 3
info: [drm] Loading R500 Microcode
info: [drm] Num pipes: 3
pcm0: <Envy24 audio (Generic)> port 0xac00-0xac1f,0xa880-0xa88f,0xa800-0xa80f,0xa480-0xa4bf irq 17 at device 6.0 on pci1
pcm0: [ITHREAD]
pcm0: system configuration
SubVendorID: 0xd632, SubDeviceID: 0x1412
XIN2 Clock Source: 22.5792MHz(44.1kHz*512)
MPU-401 UART(s) #: 1
AC'97 codec: not exist
ADC #: 2
DAC #: 2
Multi-track converter type: I2S(16bit resolution, ID#0x1)
S/PDIF(IN/OUT): 1/1 ID# 0x00
GPIO(mask/dir/state): 0x02/0xfd/0xc0
Any ideas what the issue might be?
Thanks,
M
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090812132128.GA99440>