Date: Wed, 6 Jan 2010 19:34:43 -0800 From: Weongyo Jeong <weongyo.jeong@gmail.com> To: Steven Friedrich <freebsd@insightbb.com> Cc: freebsd-net@freebsd.org Subject: Re: uath under FreeBSD 8.0-STABLE Message-ID: <20100107033443.GK1491@weongyo> In-Reply-To: <201001061244.46700.freebsd@insightbb.com> References: <201001061244.46700.freebsd@insightbb.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jan 06, 2010 at 12:44:46PM -0500, Steven Friedrich wrote:
> On Monday 04 January 2010 05:31:18 pm Weongyo Jeong wrote:
> > On Mon, Jan 04, 2010 at 03:57:56PM -0500, Steven Friedrich wrote:
> > > On Monday 04 January 2010 03:34:41 pm Weongyo Jeong wrote:
> > > > Could you please test with attached patch? Today the device I ordered
> > > > is delivered and I tried to test with it. One thing, it looks weird,
> > > > I noticed is that after uploading the firmware, idProduct is increased
> > > > not decreased.
> > > >
> > > > After patching, you should rebuild the module.
> > >
> > > I didn't get an attachment...
> >
> > Attached.
> >
> > regards,
> > Weongyo Jeong
> >
>
> I had to place:
> # Firmware download for Netgear WG111T USB ethernet.
> attach 100 {
> match "vendor" "0x1385";
> match "product" "0x4251";
> action "/usr/sbin/uathload -d /dev/$device-name";
> };
>
> in /etc/devd.conf, but I later moved it to /usr/local/etc/devd/WG111T.conf
>
> Then it appeared in the ifconfig as uath0.
>
> But I get errors later when I run wpa_supplicant -B -i wlan0 -c
> /etc/wpa_supplicant.conf
>
> Those errors are:
> uath0: timeout waiting for reply to cmd 0x8 (8)
> uath0: could not start target, error 35
>
> Your patch DOES work, AFAIK.
I tested WPA test with my device today and it worked. Could you please
show me your wpa_supplicant.conf and commands? The following is my
configuration and command.
# cat /etc/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
network={
ssid="wg"
bssid=00:08:XX:XX:XX:15
proto=WPA
key_mgmt=WPA-PSK
pairwise=TKIP
group=TKIP
scan_ssid=1
psk="XXXXXXXXXX"
}
# uathload -d /dev/ugen1.2
ugen1.2: <Atheros Communications Inc> at usbus1 (disconnected)
ugen1.2: <Athero Communications Inc> at usbus1
uath0: <Atheros Communications Inc WG111T, rev 2.00/0.01, addr 2> on
usbus1
# ifconfig wlan0 create wlandev uath0
wlan0: Ethernet address: 00:1b:2f:XX:XX:ca
<s/modules/usb/uath]# wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf
CTRL-EVENT-SCAN-RESULTS
Trying to associate with 00:08:XX:XX:XX:14 (SSID='wg' freq=2437 MHz)
Associated with 00:08:XX:XX:XX:14
WPA: Key negotiation completed with 00:08:XX:XX:XX:14 [PTK=TKIP
GTK=TKIP]
CTRL-EVENT-CONNECTED - Connection to 00:08:XX:XX:XX:14 completed (auth)
[id=0 id_str=]
regards,
Weongyo Jeong
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100107033443.GK1491>