Date: Tue, 23 Feb 2010 21:51:04 +0800 From: Alastair Hogge <agh@coolrhaug.com> To: John Baldwin <jhb@freebsd.org> Cc: kochetkov.andrew@gmail.com, Randy Chou <randychou@yahoo.com>, freebsd-hardware@freebsd.org Subject: Re: Intel DP45SG motherboard problem (amd64) Message-ID: <201002232151.04595.agh@coolrhaug.com> In-Reply-To: <201002221102.16153.jhb@freebsd.org> References: <201002212231.12018.agh@coolrhaug.com> <201002221102.16153.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue February 23 2010 00:02:16 John Baldwin wrote: > On Sunday 21 February 2010 9:31:11 am Alastair Hogge wrote: > > > > Hello all. > > > > I have a problem with Intel LGA775 DP45SG Intel P45/ICH10R > > > > motherboard on FreeBSD/amd64. Any devices (keyboard, sata, net) don't > > > > work after kernel loading. It works for i386 (expect for keyboard: > > > > first pressed key "sticks"). > > > > FreeBSD versions that i tried are: 7.0-RELEASE, 7.2-RELEASE, > > > > 8.0-CURRENT There was no difference with/without ACPI. > > > > I connect serial console, boot -v and I'm seeing FreeBSD complaining > > > > about inability to allocate interrupts for devices, like the log > > > > below: > > > > > > Try 'device mptable'. Also, do you have an i386 dmesg? > > > > > > -- > > > John Baldwin > > > > Hello John, > > > > In regards to an old email thread: > > http://lists.freebsd.org/pipermail/freebsd-hardware/2009- > > June/thread.html#5887 > > > I've attached the i386 dmesg & "mptable device" from a 9.0-CURRENT > > -r204168 system which still fails on booting an amd64 CD. > > You need to build a custom amd64 kernel which includes "device mptable" and > use that. You may need to set 'hint.acpi.0.disabled=1' as well to force > ACPI to be disabled. OK, I've cross built an amd64 system and installed it on a spare HDD. Once it booted I ran "mptable -verbose -dmesg -grope" Here is the output: =============================================================================== MPTable looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x00096400 searching CMOS 'top of mem' @ 0x00096000 (600K) searching default 'top of mem' @ 0x0009fc00 (639K) searching BIOS @ 0x000f0000 MP FPS found in BIOS @ physical addr: 0x000fd4e0 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000fd4e0 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0x7f mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x000fd240 signature: 'PCMP' base table length: 564 version: 1.4 checksum: 0xc1 OEM ID: 'DP45SG' Product ID: 'INTEL' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 59 local APIC address: 0xfee00000 extended table length: 104 extended table checksum: 45 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x14 BSP, usable 6 7 10 0xbfebfbff 1 0x14 AP, usable 6 7 10 0xbfebfbff 2 0x14 AP, usable 6 7 10 0xbfebfbff 3 0x14 AP, usable 6 7 10 0xbfebfbff -- Bus: Bus ID Type 0 PCI 1 PCI 2 PCI 3 ISA -- I/O APICs: APIC ID Version State Address 0 0x20 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# INT conforms conforms 3 0 0 2 INT conforms conforms 3 1 0 1 INT conforms conforms 3 4 0 4 INT conforms conforms 3 8 0 8 INT active-hi level 3 9 0 9 INT conforms conforms 3 12 0 12 INT conforms conforms 3 13 0 13 INT conforms conforms 3 14 0 14 INT conforms conforms 3 15 0 15 INT conforms conforms 0 6:A 0 16 INT conforms conforms 0 6:B 0 17 INT conforms conforms 0 6:C 0 18 INT conforms conforms 0 6:D 0 19 INT conforms conforms 0 1:A 0 16 INT conforms conforms 0 1:B 0 17 INT conforms conforms 0 1:C 0 18 INT conforms conforms 0 1:D 0 19 INT conforms conforms 0 31:A 0 18 INT conforms conforms 0 31:B 0 19 INT conforms conforms 0 31:C 0 18 INT conforms conforms 0 22:A 0 18 INT conforms conforms 0 22:B 0 19 INT conforms conforms 0 27:A 0 22 INT conforms conforms 2 0:A 0 19 INT conforms conforms 2 2:A 0 20 INT conforms conforms 2 2:B 0 21 INT conforms conforms 2 2:C 0 22 INT conforms conforms 2 2:D 0 23 INT conforms conforms 2 3:A 0 21 INT conforms conforms 2 3:B 0 22 INT conforms conforms 2 3:C 0 23 INT conforms conforms 2 3:D 0 20 INT conforms conforms 2 4:A 0 22 INT conforms conforms 2 4:B 0 23 INT conforms conforms 2 4:C 0 20 INT conforms conforms 2 4:D 0 21 INT conforms conforms 0 25:A 0 20 INT conforms conforms 0 29:A 0 23 INT conforms conforms 0 29:B 0 19 INT conforms conforms 0 29:C 0 18 INT conforms conforms 0 26:A 0 16 INT conforms conforms 0 26:B 0 21 INT conforms conforms 0 26:C 0 18 INT conforms conforms 0 26:D 0 16 INT conforms conforms 0 28:A 0 17 INT conforms conforms 0 28:B 0 16 INT conforms conforms 0 28:C 0 18 INT conforms conforms 0 28:D 0 19 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT conforms conforms 0 0:A 255 0 NMI conforms conforms 0 0:A 255 1 ------------------------------------------------------------------------------- MP Config Extended Table Entries: -- System Address Space bus ID: 0 address type: I/O address address base: 0xd000 address range: 0x2160 -- System Address Space bus ID: 0 address type: memory address address base: 0xd0000000 address range: 0x10227000 -- System Address Space bus ID: 0 address type: I/O address address base: 0x0 address range: 0x1000 -- System Address Space bus ID: 0 address type: memory address address base: 0xa0000 address range: 0x20000 -- Bus Hierarchy bus ID: 3 bus info: 0x01 parent bus ID: 0 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000000 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000001 ------------------------------------------------------------------------------- dmesg output: Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #0 r204168M: Tue Feb 23 06:07:50 WST 2010 agh@madcat:/usr/obj/amd64/usr/depot/svn.freebsd.org/base/head/sys/GENERIC amd64 WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz (2399.97-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 4294967296 (4096 MB) avail memory = 4100902912 (3910 MB) MPTable: <DP45SG INTEL> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0: Assuming intbase of 0 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xe0030000-0xe003ffff irq 16 at device 0.0 on pci1 vgapci1: <VGA-compatible display> mem 0xe0020000-0xe002ffff at device 0.1 on pci1 em0: <Intel(R) PRO/1000 Network Connection 6.9.25> port 0xf100-0xf11f mem 0xe0200000-0xe021ffff,0xe0224000-0xe0224fff irq 20 at device 25.0 on pci0 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:1c:c0:8c:09:d9 uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xf0e0-0xf0ff irq 16 at device 26.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup = 0x2f00 usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0 uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xf0c0-0xf0df irq 21 at device 26.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup = 0x2f00 usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1 uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xf0a0-0xf0bf irq 18 at device 26.2 on pci0 uhci2: [ITHREAD] uhci2: LegSup = 0x2f00 usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2 ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xe0225c00-0xe0225fff irq 18 at device 26.7 on pci0 ehci0: [ITHREAD] usbus3: EHCI version 1.0 usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xf080-0xf09f irq 23 at device 29.0 on pci0 uhci3: [ITHREAD] uhci3: LegSup = 0x2f00 usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3 uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xf060-0xf07f irq 19 at device 29.1 on pci0 uhci4: [ITHREAD] uhci4: LegSup = 0x2f00 usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4 uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xf040-0xf05f irq 18 at device 29.2 on pci0 uhci5: [ITHREAD] uhci5: LegSup = 0x2f00 usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5 ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xe0225800-0xe0225bff irq 23 at device 29.7 on pci0 ehci1: [ITHREAD] usbus7: waiting for BIOS to give up control usbus7: timed out waiting for BIOS usbus7: EHCI version 1.0 usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1 pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 fwohci0: <Lucent FW322/323> mem 0xe0100000-0xe0100fff irq 19 at device 0.0 on pci2 fwohci0: [ITHREAD] fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:90:27:00:02:2b:34:ed fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:90:27:2b:34:ed fwe0: Ethernet address: 02:90:27:2b:34:ed fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:90:27:00:02:2b:34:ed @ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x42000 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=2, non CYCLEMASTER mode rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xe0101000-0xe01010ff irq 20 at device 2.0 on pci2 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0e:2e:d4:2a:bb rl0: [ITHREAD] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel ICH8 AHCI SATA controller> port 0xf150-0xf157,0xf140-0xf143,0xf130-0xf137,0xf120-0xf123,0xf020-0xf03f mem 0xe0225000-0xe02257ff irq 19 at device 31.2 on pci0 ahci0: [ITHREAD] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich0: [ITHREAD] ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich1: [ITHREAD] ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich2: [ITHREAD] ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich3: [ITHREAD] ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich4: [ITHREAD] ahcich5: <AHCI channel> at channel 5 on ahci0 ahcich5: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) cpu0 on motherboard est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160922060c0616 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1 on motherboard est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160922060c0616 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2 on motherboard est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160922062e0616 device_attach: est2 attach returned 6 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3 on motherboard est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616092206360622 device_attach: est3 attach returned 6 p4tcc3: <CPU Frequency Thermal Control> on cpu3 orm0: <ISA Option ROMs> at iomem 0xcf800-0xd5fff,0xd6000-0xd6fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0 ppc0: cannot reserve I/O port range uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 uart0: [FILTER] uart0: console (115200,n,8,1) uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 uart1: [FILTER] est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616092206360622 device_attach: est0 attach returned 6 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160922060c0616 device_attach: est1 attach returned 6 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616092206360622 device_attach: est2 attach returned 6 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160922062e0616 device_attach: est3 attach returned 6 Timecounters tick every 1.000 msec firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1) usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 usbus7: 480Mbps High Speed USB v2.0 ugen7.1: <Intel> at usbus7 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 firewire0: New S400 device ID:00902700022b34b9 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered ada0 at ahcich1 bus 0 scbus2 target 0 lun 0 ada0: cd0 at ahcich0 bus 0 scbus1 target 0 lun 0 cd0: <ASUS DRW-20B1LT 1.00> Removable CD-ROM SCSI-0 device cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed <SAMSUNG HD501LJ CR100-13> ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada1 at ahcich4 bus 0 scbus5 target 0 lun 0 ada1: <ST3120026AS 3.05> ATA-6 SATA 1.x device ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) ada1: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C) ada2 at ahcich5 bus 0 scbus6 target 0 lun 0 ada2: <Maxtor 6V300F0 VA111630> ATA-7 SATA 2.x device ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 286188MB (586114704 512 byte sectors: 16H 63S/T 16383C) SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! WARNING: WITNESS option enabled, expect reduced performance. GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s). ugen0.2: <ALCOR> at usbus0 uhub8: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus0 ugen1.2: <DATACOMP> at usbus1 ukbd0: <DATACOMP SteelSDATA, class 0/0, rev 1.10/0.01, addr 2> on usbus1 kbd2 at ukbd0 ums0: <DATACOMP SteelSDATA, class 0/0, rev 1.10/0.01, addr 2> on usbus1 Trying to mount root from ufs:/dev/label/direwolf uhub8: 4 ports with 4 removable, self powered ugen0.3: <SteelSeries ApS> at usbus0 ums1: <SteelSeries ApS Ikari Laser, class 0/0, rev 2.00/1.00, addr 3> on usbus0 ums1: 7 buttons and [XYZ] coordinates ID=2 Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 done All buffers synced. lock order reversal: 1st 0xffffff0005155278 ufs (ufs) @ /usr/depot/svn.freebsd.org/base/head/sys/kern/vfs_mount.c:1201 2nd 0xffffff0004f24db8 devfs (devfs) @ /usr/depot/svn.freebsd.org/base/head/sys/kern/vfs_subr.c:2091 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2a _witness_debugger() at _witness_debugger+0x2e witness_checkorder() at witness_checkorder+0x81e __lockmgr_args() at __lockmgr_args+0xd11 vop_stdlock() at vop_stdlock+0x39 VOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b _vn_lock() at _vn_lock+0x47 vget() at vget+0x7b devfs_allocv() at devfs_allocv+0x100 devfs_root() at devfs_root+0x48 dounmount() at dounmount+0x474 vfs_unmountall() at vfs_unmountall+0x54 boot() at boot+0x7b4 reboot() at reboot+0x68 syscall() at syscall+0x102 Xfast_syscall() at Xfast_syscall+0xe1 --- syscall (55, FreeBSD ELF64, reboot), rip = 0x4082dc, rsp = 0x7fffffffe778, rbp = 0x4023d0 --- Uptime: 7m13s Rebooting... cpu_reset: Stopping other CPUs Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #0 r204168M: Tue Feb 23 06:07:50 WST 2010 agh@madcat:/usr/obj/amd64/usr/depot/svn.freebsd.org/base/head/sys/GENERIC amd64 WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz (2399.98-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 4294967296 (4096 MB) avail memory = 4100902912 (3910 MB) MPTable: <DP45SG INTEL> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0: Assuming intbase of 0 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdfffffff,0xe0030000-0xe003ffff irq 16 at device 0.0 on pci1 vgapci1: <VGA-compatible display> mem 0xe0020000-0xe002ffff at device 0.1 on pci1 em0: <Intel(R) PRO/1000 Network Connection 6.9.25> port 0xf100-0xf11f mem 0xe0200000-0xe021ffff,0xe0224000-0xe0224fff irq 20 at device 25.0 on pci0 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:1c:c0:8c:09:d9 uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xf0e0-0xf0ff irq 16 at device 26.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup = 0x2f00 usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0 uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xf0c0-0xf0df irq 21 at device 26.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup = 0x2f00 usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1 uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xf0a0-0xf0bf irq 18 at device 26.2 on pci0 uhci2: [ITHREAD] uhci2: LegSup = 0x2f00 usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2 ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xe0225c00-0xe0225fff irq 18 at device 26.7 on pci0 ehci0: [ITHREAD] usbus3: EHCI version 1.0 usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xf080-0xf09f irq 23 at device 29.0 on pci0 uhci3: [ITHREAD] uhci3: LegSup = 0x2f00 usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3 uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xf060-0xf07f irq 19 at device 29.1 on pci0 uhci4: [ITHREAD] uhci4: LegSup = 0x2f00 usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4 uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xf040-0xf05f irq 18 at device 29.2 on pci0 uhci5: [ITHREAD] uhci5: LegSup = 0x2f00 usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5 ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xe0225800-0xe0225bff irq 23 at device 29.7 on pci0 ehci1: [ITHREAD] usbus7: waiting for BIOS to give up control usbus7: timed out waiting for BIOS usbus7: EHCI version 1.0 usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1 pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 fwohci0: <Lucent FW322/323> mem 0xe0100000-0xe0100fff irq 19 at device 0.0 on pci2 fwohci0: [ITHREAD] fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:90:27:00:02:2b:34:ed fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:90:27:2b:34:ed fwe0: Ethernet address: 02:90:27:2b:34:ed fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:90:27:00:02:2b:34:ed @ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x42000 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000001, SelfID Count=2, CYCLEMASTER mode rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xe0101000-0xe01010ff irq 20 at device 2.0 on pci2 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0e:2e:d4:2a:bb rl0: [ITHREAD] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel ICH8 AHCI SATA controller> port 0xf150-0xf157,0xf140-0xf143,0xf130-0xf137,0xf120-0xf123,0xf020-0xf03f mem 0xe0225000-0xe02257ff irq 19 at device 31.2 on pci0 ahci0: [ITHREAD] ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich0: [ITHREAD] ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich1: [ITHREAD] ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich2: [ITHREAD] ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich3: [ITHREAD] ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich4: [ITHREAD] ahcich5: <AHCI channel> at channel 5 on ahci0 ahcich5: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) cpu0 on motherboard est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160922060c0616 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1 on motherboard est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160922060c0616 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2 on motherboard est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160922062e0616 device_attach: est2 attach returned 6 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3 on motherboard est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616092206360622 device_attach: est3 attach returned 6 p4tcc3: <CPU Frequency Thermal Control> on cpu3 orm0: <ISA Option ROMs> at iomem 0xcf800-0xd5fff,0xd6000-0xd6fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0 ppc0: cannot reserve I/O port range uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 uart0: [FILTER] uart0: console (115200,n,8,1) uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 uart1: [FILTER] est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160922060c0616 device_attach: est0 attach returned 6 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160922060c0616 device_attach: est1 attach returned 6 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 616092206360622 device_attach: est2 attach returned 6 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160922060c0616 device_attach: est3 attach returned 6 Timecounters tick every 1.000 msec firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1) (me) firewire0: bus manager 1 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 usbus7: 480Mbps High Speed USB v2.0 ugen7.1: <Intel> at usbus7 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 firewire0: New S400 device ID:00902700022b34b9 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered ada0 at ahcich1 bus 0 scbus2 target 0 lun 0 ada0: cd0 at ahcich0 bus 0 scbus1 target 0 lun 0 cd0: <ASUS DRW-20B1LT 1.00> Removable CD-ROM SCSI-0 device cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed <SAMSUNG HD501LJ CR100-13> ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada1 at ahcich4 bus 0 scbus5 target 0 lun 0 ada1: <ST3120026AS 3.05> ATA-6 SATA 1.x device ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) ada1: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C) ada2 at ahcich5 bus 0 scbus6 target 0 lun 0 ada2: <Maxtor 6V300F0 VA111630> ATA-7 SATA 2.x device ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 286188MB (586114704 512 byte sectors: 16H 63S/T 16383C) SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! WARNING: WITNESS option enabled, expect reduced performance. ugen0.2: <ALCOR> at usbus0 uhub8: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus0 GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s). ugen1.2: <DATACOMP> at usbus1 ukbd0: <DATACOMP SteelSDATA, class 0/0, rev 1.10/0.01, addr 2> on usbus1 kbd2 at ukbd0 ums0: <DATACOMP SteelSDATA, class 0/0, rev 1.10/0.01, addr 2> on usbus1 Trying to mount root from ufs:/dev/label/direwolf uhub8: 4 ports with 4 removable, self powered ugen0.3: <SteelSeries ApS> at usbus0 ums1: <SteelSeries ApS Ikari Laser, class 0/0, rev 2.00/1.00, addr 3> on usbus0 ums1: 7 buttons and [XYZ] coordinates ID=2 em0: link state changed to UP ===============================================================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201002232151.04595.agh>