Date: Thu, 19 Aug 2010 17:42:25 +0200 From: "Julian H. Stacey" <jhs@berklix.com> To: multimedia@freebsd.org Cc: "Julian H. Stacey" <jhs@berklix.com> Subject: 3 devices in /dev/sndstat Message-ID: <201008191542.o7JFgP7r042720@fire.js.berklix.net>
next in thread | raw e-mail | index | archive | help
Hi multimedia@freebsd.org Help please ? I probably just need an RTFM URL or a command name ? My main board (dmidecode reports Gigabyte Technology Co., Ltd. : EG31MF-S2) http://www.gigabyte.com/search/search.aspx?kw=31MF ) has 6 sound jacks: Side Rear CTR Bass White Black Orange ---- ---- ---- Mic LineOut LineIn Red Yellow Blue uname -a FreeBSD blak.js.berklix.net 8.1-RELEASE FreeBSD 8.1-RELEASE #0: Wed Aug 18 18:54:13 CEST 2010 jhs@blak.js.berklix.net:/usr/src/sys/amd64/compile/GENERIC amd64 kldload snd_driver ; cat /dev/sndstat FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64) Installed devices: pcm0: <HDA Realtek ALC888 PCM #0 Analog> (play/rec) default pcm1: <HDA Realtek ALC888 PCM #1 Analog> (play/rec) pcm2: <HDA Realtek ALC888 PCM #2 Digital> (play/rec) Previous hosts with 3 sockets & 1 pcm0: I've configured OK, but not this. (I've tested cable OK ( attached to Yellow LineOut ) & Music CD OK & xcdplayer runs normally The BIOS PCI section has something about Azalia, Auto or Off. With Auto, 3 pmcm devices are found. With Off, no pcm devices. I didnt notice anything else in BIOS to tweak. I see nothing in http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/sound-setup.html mixer Mixer vol is currently set to 75:75 Mixer pcm is currently set to 75:75 Mixer speaker is currently set to 75:75 Mixer line is currently set to 75:75 Mixer mic is currently set to 0:0 Mixer mix is currently set to 0:0 Mixer rec is currently set to 75:75 Mixer igain is currently set to 0:0 Recording source: mic mixer mix 75 ; mixer igain 75 ; mixer mic 75 ; mixer Mixer vol is currently set to 75:75 Mixer pcm is currently set to 75:75 Mixer speaker is currently set to 75:75 Mixer line is currently set to 75:75 Mixer mic is currently set to 75:75 Mixer mix is currently set to 75:75 Mixer rec is currently set to 75:75 Mixer igain is currently set to 75:75 Recording source: mic sysctl -a | grep pcm hdac0: OSS: pcm (pcm) hdac0: OSS: pcm (pcm) hdac0: OSS: pcm (pcm) hdac0: OSS: pcm (pcm) hdac0: OSS: pcm (pcm) hdac0: OSS: pcm, mix hdac0: OSS: pcm, mix hdac0: OSS: pcm, mix hdac0: OSS: pcm, mix hdac0: OSS: pcm (pcm) hdac0: OSS: pcm, mix pcm0: <HDA Realtek ALC888 PCM #0 Analog> at cad 2 nid 1 on hdac0 pcm0: +--------------------------------------+ pcm0: | DUMPING PCM Playback/Record Channels | pcm0: +--------------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x000e0560 pcm0: 16 20 24 bits, 44 48 96 192 KHz pcm0: DAC: 2 3 4 5 pcm0: pcm0: Record: pcm0: pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x00060160 pcm0: 16 20 bits, 44 48 96 KHz pcm0: ADC: 8 pcm0: pcm0: +-------------------------------+ pcm0: | DUMPING Playback/Record Paths | pcm0: +-------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: nid=20 [pin: Line-out (Green Jack)] pcm0: | pcm0: + <- nid=12 [audio mixer] [src: pcm, mix] pcm0: | pcm0: + <- nid=2 [audio output] [src: pcm] pcm0: + <- nid=11 [audio mixer] [src: mix] pcm0: pcm0: nid=22 [pin: Line-out (Orange Jack)] pcm0: | pcm0: + <- nid=13 [audio mixer] [src: pcm, mix] pcm0: | pcm0: + <- nid=3 [audio output] [src: pcm] pcm0: + <- nid=11 [audio mixer] [src: mix] pcm0: pcm0: nid=21 [pin: Line-out (Black Jack)] pcm0: | pcm0: + <- nid=14 [audio mixer] [src: pcm, mix] pcm0: | pcm0: + <- nid=4 [audio output] [src: pcm] pcm0: + <- nid=11 [audio mixer] [src: mix] pcm0: pcm0: nid=23 [pin: Line-out (Grey Jack)] pcm0: | pcm0: + <- nid=15 [audio mixer] [src: pcm, mix] pcm0: | pcm0: + <- nid=5 [audio output] [src: pcm] pcm0: + <- nid=11 [audio mixer] [src: mix] pcm0: pcm0: Record: pcm0: pcm0: nid=8 [audio input] pcm0: | pcm0: + <- nid=35 [audio mixer] [src: speaker, line, mic, mix] pcm0: | pcm0: + <- nid=24 [pin: Mic (Pink Jack)] [src: mic] pcm0: + <- nid=26 [pin: Line-in (Blue Jack)] [src: line] pcm0: + <- nid=29 [beep widget] [src: speaker] pcm0: + <- nid=11 [audio mixer] [src: mix] pcm0: pcm0: Input Mix: pcm0: pcm0: nid=11 [audio mixer] pcm0: | pcm0: + <- nid=24 [pin: Mic (Pink Jack)] [src: mic] pcm0: + <- nid=26 [pin: Line-in (Blue Jack)] [src: line] pcm0: + <- nid=29 [beep widget] [src: speaker] pcm0: pcm0: +-------------------------+ pcm0: | DUMPING Volume Controls | pcm0: +-------------------------+ pcm0: pcm0: Master Volume (OSS: vol) pcm0: | pcm0: +- ctl 13 (nid 12 out): -46/0dB (32 steps) pcm0: +- ctl 14 (nid 12 in 0): mute pcm0: +- ctl 15 (nid 12 in 1): mute pcm0: +- ctl 16 (nid 13 out): -46/0dB (32 steps) pcm0: +- ctl 17 (nid 13 in 0): mute pcm0: +- ctl 18 (nid 13 in 1): mute pcm0: +- ctl 19 (nid 14 out): -46/0dB (32 steps) pcm0: +- ctl 20 (nid 14 in 0): mute pcm0: +- ctl 21 (nid 14 in 1): mute pcm0: +- ctl 22 (nid 15 out): -46/0dB (32 steps) pcm0: +- ctl 23 (nid 15 in 0): mute pcm0: +- ctl 24 (nid 15 in 1): mute pcm0: +- ctl 25 (nid 20 in ): mute pcm0: +- ctl 27 (nid 21 in ): mute pcm0: +- ctl 29 (nid 22 in ): mute pcm0: +- ctl 31 (nid 23 in ): mute pcm0: pcm0: PCM Volume (OSS: pcm) pcm0: | pcm0: +- ctl 14 (nid 12 in 0): mute pcm0: +- ctl 17 (nid 13 in 0): mute pcm0: +- ctl 20 (nid 14 in 0): mute pcm0: +- ctl 23 (nid 15 in 0): mute pcm0: pcm0: Microphone Volume (OSS: mic) pcm0: | pcm0: +- ctl 34 (nid 24 out): 0/30dB (4 steps) pcm0: +- ctl 52 (nid 35 in 0): mute pcm0: pcm0: Line-in Volume (OSS: line) pcm0: | pcm0: +- ctl 38 (nid 26 out): 0/30dB (4 steps) pcm0: +- ctl 54 (nid 35 in 2): mute pcm0: pcm0: Speaker/Beep Volume (OSS: speaker) pcm0: | pcm0: +- ctl 8 (nid 11 in 5): -34/12dB (32 steps) + mute pcm0: +- ctl 57 (nid 35 in 5): mute pcm0: pcm0: Recording Level (OSS: rec) pcm0: | pcm0: +- ctl 1 (nid 8 in 0): -16/30dB (32 steps) + mute pcm0: +- ctl 52 (nid 35 in 0): mute pcm0: +- ctl 54 (nid 35 in 2): mute pcm0: +- ctl 57 (nid 35 in 5): mute pcm0: +- ctl 62 (nid 35 in 10): mute pcm0: pcm0: Input Mix Level (OSS: mix) pcm0: | pcm0: +- ctl 3 (nid 11 in 0): -34/12dB (32 steps) + mute pcm0: +- ctl 5 (nid 11 in 2): -34/12dB (32 steps) + mute pcm0: +- ctl 8 (nid 11 in 5): -34/12dB (32 steps) + mute pcm0: +- ctl 15 (nid 12 in 1): mute pcm0: +- ctl 18 (nid 13 in 1): mute pcm0: +- ctl 21 (nid 14 in 1): mute pcm0: +- ctl 24 (nid 15 in 1): mute pcm0: +- ctl 62 (nid 35 in 10): mute pcm0: pcm0: Input Monitoring Level (OSS: igain) pcm0: | pcm0: +- ctl 15 (nid 12 in 1): mute pcm0: +- ctl 18 (nid 13 in 1): mute pcm0: +- ctl 21 (nid 14 in 1): mute pcm0: +- ctl 24 (nid 15 in 1): mute pcm0: pcm0: Enabling Soft PCM volume pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "mix": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Soft PCM mixer ENABLED pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap a8390000, 4000; 0xffffff8078ddd000 -> a8390000 pcm0: sndbuf_setmap 50d60000, 4000; 0xffffff8078ded000 -> 50d60000 pcm1: <HDA Realtek ALC888 PCM #1 Analog> at cad 2 nid 1 on hdac0 pcm1: +--------------------------------------+ pcm1: | DUMPING PCM Playback/Record Channels | pcm1: +--------------------------------------+ pcm1: pcm1: Playback: pcm1: pcm1: Stream cap: 0x00000001 pcm1: PCM pcm1: PCM cap: 0x000e0560 pcm1: 16 20 24 bits, 44 48 96 192 KHz pcm1: DAC: 37 pcm1: pcm1: Record: pcm1: pcm1: Stream cap: 0x00000001 pcm1: PCM pcm1: PCM cap: 0x00060160 pcm1: 16 20 bits, 44 48 96 KHz pcm1: ADC: 9 pcm1: pcm1: +-------------------------------+ pcm1: | DUMPING Playback/Record Paths | pcm1: +-------------------------------+ pcm1: pcm1: Playback: pcm1: pcm1: nid=27 [pin: Headphones (Green Jack)] pcm1: | pcm1: + <- nid=38 [audio mixer] [src: pcm, mix] pcm1: | pcm1: + <- nid=37 [audio output] [src: pcm] pcm1: + <- nid=11 [audio mixer] [src: mix] pcm1: pcm1: Record: pcm1: pcm1: nid=9 [audio input] pcm1: | pcm1: + <- nid=34 [audio mixer] [src: speaker, monitor] pcm1: | pcm1: + <- nid=25 [pin: Mic (Pink Jack)] [src: monitor] pcm1: + <- nid=29 [beep widget] [src: speaker] pcm1: pcm1: +-------------------------+ pcm1: | DUMPING Volume Controls | pcm1: +-------------------------+ pcm1: pcm1: Master Volume (OSS: vol) pcm1: | pcm1: +- ctl 39 (nid 27 in ): mute pcm1: +- ctl 63 (nid 38 out): -46/0dB (32 steps) pcm1: +- ctl 64 (nid 38 in 0): mute pcm1: +- ctl 65 (nid 38 in 1): mute pcm1: pcm1: PCM Volume (OSS: pcm) pcm1: | pcm1: +- ctl 64 (nid 38 in 0): mute pcm1: pcm1: Microphone2 Volume (OSS: monitor) pcm1: | pcm1: +- ctl 36 (nid 25 out): 0/30dB (4 steps) pcm1: +- ctl 42 (nid 34 in 1): mute pcm1: pcm1: Speaker/Beep Volume (OSS: speaker) pcm1: | pcm1: +- ctl 46 (nid 34 in 5): mute pcm1: pcm1: Recording Level (OSS: rec) pcm1: | pcm1: +- ctl 2 (nid 9 in 0): -16/30dB (32 steps) + mute pcm1: +- ctl 42 (nid 34 in 1): mute pcm1: +- ctl 46 (nid 34 in 5): mute pcm1: pcm1: Input Mix Level (OSS: mix) pcm1: | pcm1: +- ctl 65 (nid 38 in 1): mute pcm1: pcm1: Input Monitoring Level (OSS: igain) pcm1: | pcm1: +- ctl 65 (nid 38 in 1): mute pcm1: pcm1: Enabling Soft PCM volume pcm1: Mixer "vol": pcm1: Mixer "pcm": pcm1: Mixer "speaker": pcm1: Mixer "mix": pcm1: Mixer "rec": pcm1: Mixer "igain": pcm1: Mixer "monitor": pcm1: Soft PCM mixer ENABLED pcm1: clone manager: deadline=750ms flags=0x8000001e pcm1: sndbuf_setmap 50d70000, 4000; 0xffffff8078dfd000 -> 50d70000 pcm1: sndbuf_setmap a83f0000, 4000; 0xffffff8078e0d000 -> a83f0000 pcm2: <HDA Realtek ALC888 PCM #2 Digital> at cad 2 nid 1 on hdac0 pcm2: +--------------------------------------+ pcm2: | DUMPING PCM Playback/Record Channels | pcm2: +--------------------------------------+ pcm2: pcm2: Playback: pcm2: pcm2: Stream cap: 0x00000005 pcm2: AC3 PCM pcm2: PCM cap: 0x001e05e0 pcm2: 16 20 24 32 bits, 44 48 88 96 192 KHz pcm2: DAC: 6 pcm2: pcm2: Record: pcm2: pcm2: Stream cap: 0x00000005 pcm2: AC3 PCM pcm2: PCM cap: 0x001e0560 pcm2: 16 20 24 32 bits, 44 48 96 192 KHz pcm2: ADC: 10 pcm2: pcm2: +-------------------------------+ pcm2: | DUMPING Playback/Record Paths | pcm2: +-------------------------------+ pcm2: pcm2: Playback: pcm2: pcm2: nid=30 [pin: SPDIF-out (Orange Jack)] pcm2: | pcm2: + <- nid=6 [audio output] [src: pcm] pcm2: pcm2: Record: pcm2: pcm2: nid=10 [audio input] pcm2: | pcm2: + <- nid=31 [pin: SPDIF-in (Yellow Jack)] [src: dig1] pcm2: pcm2: +-------------------------+ pcm2: | DUMPING Volume Controls | pcm2: +-------------------------+ pcm2: pcm2: Forcing Soft PCM volume pcm2: Forcing master volume with PCM pcm2: Mixer "vol" -> "none": child=0x00000010 pcm2: Mixer "pcm": parent="vol" pcm2: Soft PCM mixer ENABLED pcm2: clone manager: deadline=750ms flags=0x8000001e pcm2: sndbuf_setmap 50d80000, 4000; 0xffffff8078e1d000 -> 50d80000 pcm2: sndbuf_setmap 50d90000, 4000; 0xffffff8078e2d000 -> 50d90000 dev.pcm.0.%desc: HDA Realtek ALC888 PCM #0 Analog dev.pcm.0.%driver: pcm dev.pcm.0.%parent: hdac0 dev.pcm.0.play.vchans: 1 dev.pcm.0.play.vchanmode: fixed dev.pcm.0.play.vchanrate: 48000 dev.pcm.0.play.vchanformat: s16le:2.0 dev.pcm.0.rec.vchans: 1 dev.pcm.0.rec.vchanmode: fixed dev.pcm.0.rec.vchanrate: 48000 dev.pcm.0.rec.vchanformat: s16le:2.0 dev.pcm.0.buffersize: 16384 dev.pcm.0.bitperfect: 0 dev.pcm.1.%desc: HDA Realtek ALC888 PCM #1 Analog dev.pcm.1.%driver: pcm dev.pcm.1.%parent: hdac0 dev.pcm.1.play.vchans: 1 dev.pcm.1.play.vchanmode: fixed dev.pcm.1.play.vchanrate: 48000 dev.pcm.1.play.vchanformat: s16le:2.0 dev.pcm.1.rec.vchans: 1 dev.pcm.1.rec.vchanmode: fixed dev.pcm.1.rec.vchanrate: 48000 dev.pcm.1.rec.vchanformat: s16le:2.0 dev.pcm.1.buffersize: 16384 dev.pcm.1.bitperfect: 0 dev.pcm.2.%desc: HDA Realtek ALC888 PCM #2 Digital dev.pcm.2.%driver: pcm dev.pcm.2.%parent: hdac0 dev.pcm.2.play.vchans: 1 dev.pcm.2.play.vchanmode: passthrough dev.pcm.2.play.vchanrate: 48000 dev.pcm.2.play.vchanformat: s16le:2.0 dev.pcm.2.rec.vchans: 1 dev.pcm.2.rec.vchanmode: passthrough dev.pcm.2.rec.vchanrate: 48000 dev.pcm.2.rec.vchanformat: s16le:2.0 dev.pcm.2.buffersize: 16384 dev.pcm.2.bitperfect: 0 Any other data I should have given ? Grateful for any ideas/ pointers please. In parallel I will search & download manuals for mainboard & BIOS, but I guess that won't produce the answer but this list will know, I hope :-) Cheers, Julian -- Julian Stacey, BSD Unix Linux C Sys Eng Consultants Munich http://berklix.com Mail plain text, Not HTML, quoted-printable & base 64 dumped with spam. Avoid top posting, It cripples itemised cumulative responses.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201008191542.o7JFgP7r042720>