Date: Mon, 30 Aug 2010 22:10:51 +0200 From: David Naylor <naylor.b.david@gmail.com> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: webcamd and Pixart Imaging Message-ID: <201008302210.57291.naylor.b.david@gmail.com> In-Reply-To: <201008302118.28889.hselasky@c2i.net> References: <201008292147.09750.naylor.b.david@gmail.com> <201008300856.40160.naylor.b.david@gmail.com> <201008302118.28889.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] On Monday 30 August 2010 21:18:28 Hans Petter Selasky wrote: > On Monday 30 August 2010 08:56:36 David Naylor wrote: > > On Monday 30 August 2010 08:33:30 Hans Petter Selasky wrote: > > > Hi, > > > > > > Could you dump device descriptor and current configuration descriptor > > > using usbconfig. I need the vendor ID and product ID at least to be > > > able to debug this issue. > > > > # usbconfig -d ugen0.2 dump_device_desc > > ugen0.2: <CIF Single Chip Pixart Imaging Inc.> at usbus0, cfg=0 md=HOST > > spd=FULL (12Mbps) pwr=ON > > > > bLength = 0x0012 > > bDescriptorType = 0x0001 > > bcdUSB = 0x0110 > > bDeviceClass = 0x00ff > > bDeviceSubClass = 0x00ff > > bDeviceProtocol = 0x00ff > > bMaxPacketSize0 = 0x0008 > > idVendor = 0x093a > > idProduct = 0x2468 > > bcdDevice = 0x0100 > > iManufacturer = 0x0001 <Pixart Imaging Inc. > > > iProduct = 0x0002 <CIF Single Chip > > > iSerialNumber = 0x0000 <no string> > > bNumConfigurations = 0x0001 > > > > # usbconfig -d ugen0.2 dump_curr_config_desc > > ugen0.2: <CIF Single Chip Pixart Imaging Inc.> at usbus0, cfg=0 md=HOST > > spd=FULL (12Mbps) pwr=ON > > Hi, > > This information looks Ok. > > Try installing webcamd from I4B SVN: > > Compile using: > > make -j3 HAVE_DEBUG=YES > > http://www.selasky.org/hans_petter/video4bsd > > Then start webcamd in the foreground and post debug log. Hi, Here is the debug output from webcamd: # ./webcamd Linux video capture interface: v2.00 benq: registered conex: registered etoms: registered finepix: registered gspca_gl860: driver startup - version 0.9d10 gspca_gl860: driver registered gspca: main v2.9.0 registered jeilinj: registered ALi m5602: registered mars: registered mr97310a: registered ov519: registered ov534: registered ov534_9: registered pac207: registered pac7302: registered pac7311: registered sn9c20x: registered sonixb: registered sonixj: registered spca500: registered spca501: registered spca505: registered spca506: registered spca508: registered spca561: registered sq905: registered sq905c: registered stk014: registered stv0680: registered STV06xx: registered sunplus: registered t613: registered tv8532: registered vc032x: registered zc3xx: registered pwc: Philips webcam module version 10.0.13 loaded. pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC- C10 and MPC-C30, pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. cpia2: V4L-Driver for Vision CPiA2 based cameras v2.0.0 pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner pvrusb2: Debug mask is 31 (0x1f) dib0700: loaded with support for 14 different device-types b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully stv0680: registered SE401 usb camera driver version 0.24 registering usbvideo_register: Allocated $0x80106f000 (4576. bytes) for 4. camerasusbvideo_register: Allocated cams[0].user_data=$0x80106c070 (48. bytes)usbvideo_register: Allocated cams[1].user_data=$0x80106c0a0 (48. bytes)usbvideo_register: Allocated cams[2].user_data=$0x80106c0d0 (48. bytes)usbvideo_register: Allocated cams[3].user_data=$0x80106c100 (48. bytes): v1.4:Konica Webcam driver usbvideo_register: Allocated $0x8010f4600 (1672. bytes) for 1. camerasusbvideo_register: Allocated cams[0].user_data=$0x801116100 (200. bytes)usbvideo_register: Allocated $0x801070800 (4576. bytes) for 4. camerasusbvideo_register: Allocated cams[0].user_data=$0x80106c130 (48. bytes)usbvideo_register: Allocated cams[1].user_data=$0x80106c160 (48. bytes)usbvideo_register: Allocated cams[2].user_data=$0x80106c190 (48. bytes)usbvideo_register: Allocated cams[3].user_data=$0x80106c1c0 (48. bytes): Zoran 364xx USB Video Class driver (v0.1.0) Attached ugen0.2[0] to cuse unit 0 gspca: probing 093a:2468 pac207: Pixart Sensor ID 0x27 Chips ID 0x00 pac207: Pixart PAC207BCA Image Processor and Control Chip detected (vid/pid 0x093A:0x2468) gspca: video0 created gspca: found int in endpoint: 0x83, buffer_len=2, interval=50 Creating /dev/video0 (( ran pwcview )) gspca: found int in endpoint: 0x83, buffer_len=2, interval=50 gspca: found int in endpoint: 0x83, buffer_len=2, interval=50 (( ran pwcview )) gspca: found int in endpoint: 0x83, buffer_len=2, interval=50 gspca: found int in endpoint: 0x83, buffer_len=2, interval=50 Both times pwcview reported the same error. [-- Attachment #2 --] -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.15 (FreeBSD) iEYEABECAAYFAkx8EFEACgkQUaaFgP9pFrIe2gCeOHZ/OmYin6AliJ/Q1hetOd4k uLYAn2AffogS8dBiujr2oEDn+umnYAf8 =lpz6 -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201008302210.57291.naylor.b.david>