Date: Sun, 23 Jan 2011 19:29:18 +0100 From: Matthias Apitz <guru@unixarea.de> To: Hans Petter Selasky <hselasky@c2i.net> Cc: mav@freebsd.org, freebsd-usb@freebsd.org Subject: Re: da(4) not attaching to USB drive Message-ID: <20110123182918.GA16104@tinyCurrent> In-Reply-To: <201101231748.24599.hselasky@c2i.net> References: <20110122104239.GA4991@tinyCurrent> <20110122150835.GA5762@tinyCurrent> <201101231006.00289.hselasky@c2i.net> <201101231748.24599.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
El día Sunday, January 23, 2011 a las 05:48:24PM +0100, Hans Petter Selasky escribió: > On Sunday 23 January 2011 10:06:00 Hans Petter Selasky wrote: > > Hi Mav, > > > > Do you know if there are any recent changes in the SCSI layer on FreeBSD > > that will affect USB SCSI devices? > > Another idea: > > Maybe your device is too late identifying itself. You could try: > > usbconfig -d X.Y set_config 0 > > Then: > > usbconfig -d X.Y set_config 1 > > After that the device has been plugged. usbconfig -d X.Y set_config 1 always gives usbconfig: could not set config index: Input/output error regardless if the disk is plugged in or not; today once it connected by its own, i.e. it was sitting pluged in and after a while it diconnected and connected again (without my action, I was reading some mail): ... Jan 23 18:10:03 tinyCurrent kernel: (probe0:umass-sim0:0:0:0): AutoSense failed Jan 23 18:10:03 tinyCurrent kernel: ugen4.3: <Freecom> at usbus4 (disconnected) Jan 23 18:10:03 tinyCurrent kernel: umass0: at uhub4, port 1, addr 3 (disconnected) Jan 23 18:10:05 tinyCurrent root: Unknown USB device: vendor 0x07ab product 0xfc8e bus uhub4 Jan 23 18:10:05 tinyCurrent kernel: ugen4.3: <Freecom> at usbus4 Jan 23 18:10:05 tinyCurrent kernel: umass0: <Bulk Only Interface> on usbus4 Jan 23 18:10:05 tinyCurrent kernel: umass0: SCSI over Bulk-Only; quirks = 0x0000 Jan 23 18:10:06 tinyCurrent kernel: umass0:0:0:-1: Attached to scbus0 Jan 23 18:11:16 tinyCurrent kernel: (probe0:umass-sim0:0:0:0): AutoSense failed Jan 23 18:11:16 tinyCurrent kernel: ugen4.3: <Freecom> at usbus4 (disconnected) Jan 23 18:11:16 tinyCurrent kernel: umass0: at uhub4, port 1, addr 3 (disconnected) and now it connects with success by its own: Jan 23 18:11:18 tinyCurrent kernel: ugen4.3: <Freecom> at usbus4 Jan 23 18:11:18 tinyCurrent kernel: umass0: <Bulk Only Interface> on usbus4 Jan 23 18:11:18 tinyCurrent kernel: umass0: SCSI over Bulk-Only; quirks = 0x0000 Jan 23 18:11:18 tinyCurrent root: Unknown USB device: vendor 0x07ab product 0xfc8e bus uhub4 Jan 23 18:11:19 tinyCurrent kernel: umass0:0:0:-1: Attached to scbus0 Jan 23 18:11:19 tinyCurrent kernel: da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 Jan 23 18:11:19 tinyCurrent kernel: da0: <Freecom Hard Drive XS 1.00> Fixed Direct Acc ess SCSI-2 device Jan 23 18:11:19 tinyCurrent kernel: da0: 40.000MB/s transfers Let me know if you need more debug output Thx matthias -- Matthias Apitz t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211 e <guru@unixarea.de> - w http://www.unixarea.de/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20110123182918.GA16104>