Date: Tue, 12 Apr 2011 14:03:54 -0700 From: YongHyeon PYUN <pyunyh@gmail.com> To: Alexander Motin <mav@freebsd.org> Cc: FreeBSD-Current <freebsd-current@freebsd.org>, David Naylor <naylor.b.david@gmail.com> Subject: Re: [regression] unable to boot: no GEOM devices found. Message-ID: <20110412210354.GC1421@michelle.cdnetworks.com> In-Reply-To: <4DA4B247.6010901@FreeBSD.org> References: <mailpost.1302585106.8448174.20731.mailing.freebsd.current@FreeBSD.cs.nctu.edu.tw> <4DA3EE8F.8050306@FreeBSD.org> <201104122132.23809.naylor.b.david@gmail.com> <4DA4B247.6010901@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Apr 12, 2011 at 11:12:55PM +0300, Alexander Motin wrote: > David Naylor wrote: > > On Tuesday 12 April 2011 08:17:51 Alexander Motin wrote: > >> David Naylor wrote: > >>> I am running -current and since a few days ago (at least 2011/04/11) I am > >>> unable to boot. > >>> > >>> The boot process stops when it looks to find a bootable device. The > >>> prompt (when pressing '?') does not display any device and yielding one > >>> second (or more) to the kernel (by pressing '.') does not improve the > >>> situation. > >>> > >>> A known working date is 2011/02/20. > >>> > >>> I am running amd64 on a nVidia MCP51 chipset. > >> MCP51... again... > >> > >>> I am willing to help any way I can. > >> You could start from capturing and showing verbose dmesg. Full or at > >> least in parts related to disks. > > > > I captured the dmesg output for both the old (working) kernel and the new > > (bad) kernel. See attached for the difference between the two. If you need > > the full dmesg please let me know. > > > > One thing I found is that the old kernel would not boot if I simply rebooted > > from the bad kernel. I had to do a hard power off before the old kernel would > > work again. Is some device state surviving between reboots? > > +ata2: reiniting channel .. > +ata2: SATA connect time=0ms status=00000113 > +ata2: reset tp1 mask=01 ostat0=58 ostat1=00 > +ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 > +ata2: reset tp2 stat0=50 stat1=00 devices=0x1 > +ata2: reinit done .. > +unknown: FAILURE - ATA_IDENTIFY timed out LBA=0 > > As soon as all devices detected but not responding to commands, I would > suppose that there is something wrong with ATA interrupts. There is a > long chain of interrupt problems in this chipset. I have already tried > to debug one case where ATA wasn't generating interrupts at all. > Unfortunately, without success -- requests were executing, but not > generating interrupts, it wasn't looked like ATA driver problem. > > What's about possible candidate to revision triggering your problem, I > would look on this message: > +pcib0: Enabling MSI window for HyperTransport slave at pci0:0:9:0 > > At least it is recent (SVN revs 219737,219740 on 2011-03-18 by jhb) and > it is interrupt related. > Does the driver disable MSI for MCP51? I think jhb's patch fixed one MSI issue of all MCP chipset.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20110412210354.GC1421>