Date: Tue, 12 Apr 2011 21:32:20 +0200 From: David Naylor <naylor.b.david@gmail.com> To: Alexander Motin <mav@freebsd.org> Cc: FreeBSD-Current <freebsd-current@freebsd.org> Subject: Re: [regression] unable to boot: no GEOM devices found. Message-ID: <201104122132.23809.naylor.b.david@gmail.com> In-Reply-To: <4DA3EE8F.8050306@FreeBSD.org> References: <mailpost.1302585106.8448174.20731.mailing.freebsd.current@FreeBSD.cs.nctu.edu.tw> <4DA3EE8F.8050306@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--nextPart3394349.yoO1nZosXY
Content-Type: multipart/mixed;
boundary="Boundary-01=_EjKpNEGvnSpqhAB"
Content-Transfer-Encoding: 7bit
--Boundary-01=_EjKpNEGvnSpqhAB
Content-Type: Text/Plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
On Tuesday 12 April 2011 08:17:51 Alexander Motin wrote:
> David Naylor wrote:
> > I am running -current and since a few days ago (at least 2011/04/11) I =
am
> > unable to boot.
> >=20
> > The boot process stops when it looks to find a bootable device. The
> > prompt (when pressing '?') does not display any device and yielding one
> > second (or more) to the kernel (by pressing '.') does not improve the
> > situation.
> >=20
> > A known working date is 2011/02/20.
> >=20
> > I am running amd64 on a nVidia MCP51 chipset.
>=20
> MCP51... again...
>=20
> > I am willing to help any way I can.
>=20
> You could start from capturing and showing verbose dmesg. Full or at
> least in parts related to disks.
I captured the dmesg output for both the old (working) kernel and the new=20
(bad) kernel. See attached for the difference between the two. If you nee=
d=20
the full dmesg please let me know. =20
One thing I found is that the old kernel would not boot if I simply reboote=
d=20
from the bad kernel. I had to do a hard power off before the old kernel wo=
uld=20
work again. Is some device state surviving between reboots? =20
Regards,
David
--Boundary-01=_EjKpNEGvnSpqhAB
Content-Type: text/x-patch;
charset="UTF-8";
name="dmesg.diff"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg.diff"
=2D-- dmesg.old 2011-04-12 21:26:44.000000000 +0200
+++ dmesg.new 2011-04-12 21:24:12.000000000 +0200
@@ -16,17 +16,17 @@
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
=2DMADT: Found CPU APIC ID 3 ACPI ID 1: enabled
=2DSMP: Added CPU 3 (AP)
=2DMADT: Found CPU APIC ID 1 ACPI ID 2: enabled
+MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
+MADT: Found CPU APIC ID 3 ACPI ID 2: enabled
+SMP: Added CPU 3 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 3: enabled
SMP: Added CPU 2 (AP)
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
=2DFreeBSD 9.0-CURRENT #0: Mon Mar 7 17:47:26 SAST 2011
+FreeBSD 9.0-CURRENT #0: Tue Apr 12 21:09:23 SAST 2011
root@dragon.dg:/tmp/home/freebsd9/src/sys/DRAGON amd64
Table 'FACP' at 0xcfff30c0
Table 'HPET' at 0xcfff7940
@@ -35,25 +35,24 @@
Table 'SSDT' at 0xcfff7a40
Table 'SSDT' at 0xcfff7ff0
ACPI: No SRAT table found
=2DPreloaded elf kernel "/boot/dragon/kernel" at 0xffffffff819ce000.
=2DPreloaded elf obj module "/boot/modules/cuse4bsd.ko" at 0xffffffff819ce1=
d0.
=2DPreloaded elf obj module "/boot/dragon/geom_sched.ko" at 0xffffffff819ce=
7c0.
=2DPreloaded elf obj module "/boot/dragon/gsched_rr.ko" at 0xffffffff819cee=
70.
=2DPreloaded elf obj module "/boot/modules/nvidia.ko" at 0xffffffff819cf3e0.
=2DCalibrating TSC clock ... TSC clock: 2400024582 Hz
=2DCPU: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz (2400.02-MHz K8-cla=
ss CPU)
+Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81a01000.
+Preloaded elf obj module "/boot/modules/cuse4bsd.ko" at 0xffffffff81a011d0.
+Preloaded elf obj module "/boot/kernel/geom_sched.ko" at 0xffffffff81a017c=
0.
+Preloaded elf obj module "/boot/kernel/gsched_rr.ko" at 0xffffffff81a01e70.
+Preloaded elf obj module "/boot/modules/nvidia.ko" at 0xffffffff81a023e0.
+CPU: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz (K8-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x6f7 Family =3D 6 Model =3D f Step=
ping =3D 7
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P=
GE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=3D0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PD=
CM>
AMD Features=3D0x20100800<SYSCALL,NX,LM>
AMD Features2=3D0x1<LAHF>
=2D TSC: P-state invariant
real memory =3D 6442450944 (6144 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
=2D0x0000000001a01000 - 0x00000000c34d3fff, 3249352704 bytes (793299 pages)
+0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
+0x0000000001a34000 - 0x00000000c34d3fff, 3249143808 bytes (793248 pages)
0x0000000100000000 - 0x00000001affeffff, 2952724480 bytes (720880 pages)
=2Davail memory =3D 6161305600 (5875 MB)
+avail memory =3D 6162554880 (5877 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <GBT NVDAACPI>
INTR: Adding local APIC 1 as a target
@@ -65,14 +64,14 @@
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
+APIC: CPU 0 has ACPI ID 0
+APIC: CPU 1 has ACPI ID 1
+APIC: CPU 2 has ACPI ID 3
+APIC: CPU 3 has ACPI ID 2
x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000
x86bios: SSEG 0x001000-0x001fff at 0xffffff800002a000
x86bios: EBDA 0x09f000-0x09ffff at 0xfffffe000009f000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
=2DAPIC: CPU 0 has ACPI ID 0
=2DAPIC: CPU 1 has ACPI ID 2
=2DAPIC: CPU 2 has ACPI ID 3
=2DAPIC: CPU 3 has ACPI ID 1
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
@@ -99,12 +98,12 @@
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
=2Dlapic3: Routing NMI -> LINT1
=2Dlapic3: LINT1 trigger: edge
=2Dlapic3: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
+lapic3: Routing NMI -> LINT1
+lapic3: LINT1 trigger: edge
+lapic3: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
@@ -114,10 +113,9 @@
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
Cuse4BSD v0.1.13 @ /dev/cuse
=2Dwlan: <802.11 Link Layer>
snd_unit_init() u=3D0x00ff8000 [512] d=3D0x00007c00 [32] c=3D0x000003ff [1=
024]
feeder_register: snd_unit=3D-1 snd_maxautovchans=3D16 latency=3D5 feeder_r=
ate_min=3D1 feeder_rate_max=3D2016000 feeder_rate_round=3D25
=2Dnull: <null device, zero device>
+wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
kbd: new array size 4
kbd1 at kbdmux0
@@ -161,6 +159,7 @@
VESA: NVIDIA
VESA: NVIDIA Corporation G73 Board - p345h0 Chip Rev =20
io: <I/O>
+null: <null device, zero device>
GEOM_SCHED: Modevent 0.
GEOM_SCHED: Initializing global data.
GEOM_SCHED: Loaded module rr error 0.
@@ -452,6 +451,7 @@
lattimer=3D0x00 (0 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 =
ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
+pcib0: Enabling MSI window for HyperTransport slave at pci0:0:9:0
found-> vendor=3D0x10de, dev=3D0x0270, revid=3D0xa2
domain=3D0, bus=3D0, slot=3D9, func=3D0
class=3D05-00-00, hdrtype=3D0x00, mfdev=3D0
@@ -490,13 +490,13 @@
pcib0: matched entry for 0.11.INTA (src \_SB_.PCI0.APCF:0)
pci_link28: Picked IRQ 21 with weight 0
pcib0: slot 11 INTA routed to irq 21 via \_SB_.PCI0.APCF
=2D
found-> vendor=3D0x10de, dev=3D0x026e, revid=3D0xa3
domain=3D0, bus=3D0, slot=3D11, func=3D1
class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x00b0, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x01 (250=
ns)
intpin=3Db, irq=3D10
+
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xe7006000, size 8, enabled
pcib0: matched entry for 0.11.INTB (src \_SB_.PCI0.APCL:0)
@@ -616,14 +616,14 @@
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50
usbus0: <OHCI (generic) USB controller> on ohci0
usbus0: bpf attached
=2Dohci0: usbpf attached
+ohci0: usbpf: Attached
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe7006000-0xe70060ff irq 2=
2 at device 11.1 on pci0
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 51
ehci0: Doorbell workaround enabled
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
usbus1: bpf attached
=2Dehci0: usbpf attached
+ehci0: usbpf: Attached
atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0=
x170-0x177,0x376,0xf000-0xf00f at device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
@@ -737,7 +737,7 @@
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
=2Dacpi0: wakeup code va 0xffffff81b14cd000 pa 0x4000
+acpi0: wakeup code va 0xffffff81a4d89000 pa 0x4000
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
@@ -777,8 +777,7 @@
Device configuration finished.
linprocfs registered
procfs registered
=2DTimecounter "TSC" frequency 2400024582 Hz quality -100
=2Dlapic: Divisor 2, Frequency 133334705 Hz
+lapic: Divisor 2, Frequency 133332449 Hz
Timecounters tick every 10.000 msec
vlan: initialized, using hash tables with chaining
Linux ELF exec handler installed
@@ -791,24 +790,71 @@
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
=2Data0-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire
=2D: ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA66 cable=3D40 wire
+: Loading: mp =3D 0xffffffff80c4f0c0, g_sched_class =3D 0xffffffff80c4f0c0.
+uhub0: 8 ports with 8 removable, self powered
+ata0: reiniting channel ..
+ata0: reset tp1 mask=3D03 ostat0=3D10 ostat1=3D58
+ata0: stat0=3D0x10 err=3D0x01 lsb=3D0x14 msb=3D0xeb
+ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
+ata0: reset tp2 stat0=3D10 stat1=3D00 devices=3D0x30000
+ata0: reinit done ..
+unknown: FAILURE - ATAPI_IDENTIFY timed out LBA=3D0
+ata0: reiniting channel ..
+ata0: reset tp1 mask=3D03 ostat0=3D10 ostat1=3D58
+ata0: stat0=3D0x10 err=3D0x01 lsb=3D0x14 msb=3D0xeb
+ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
+ata0: reset tp2 stat0=3D10 stat1=3D00 devices=3D0x30000
+ata0: reinit done ..
+unknown: FAILURE - ATAPI_IDENTIFY timed out LBA=3D0
+ata0: reiniting channel ..
+ata0: reset tp1 mask=3D03 ostat0=3D58 ostat1=3D00
+ata0: stat0=3D0x10 err=3D0x01 lsb=3D0x14 msb=3D0xeb
+ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
+ata0: reset tp2 stat0=3D10 stat1=3D00 devices=3D0x30000
+ata0: reinit done ..
+unknown: FAILURE - ATAPI_IDENTIFY timed out LBA=3D0
+uhub1: 8 ports with 8 removable, self powered
+ata0: reiniting channel ..
+ata0: reset tp1 mask=3D03 ostat0=3D58 ostat1=3D00
+ata0: stat0=3D0x10 err=3D0x01 lsb=3D0x14 msb=3D0xeb
+ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
+ata0: reset tp2 stat0=3D10 stat1=3D00 devices=3D0x30000
+ata0: reinit done ..
+unknown: FAILURE - ATAPI_IDENTIFY timed out LBA=3D0
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
ata2: Identifying devices: 00000001
ata2: New devices: 00000001
=2DLoading: mp =3D 0xffffffff80c1be60, g_sched_class =3D 0xffffffff80c1be60=
=2Eata2-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire
=2D
=2Dad4: setting UDMA100
=2Dad4: 305244MB <Seagate ST3320620AS 3.AAK> at ata2-master UDMA100 SATA 1.=
5Gb/s
=2Dad4: 625140335 sectors [620178C/16H/63S] 16 sectors/interrupt 1 depth qu=
eue
+ata2: reiniting channel ..
+ata2: SATA connect time=3D0ms status=3D00000113
+ata2: reset tp1 mask=3D01 ostat0=3D58 ostat1=3D00
+ata2: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
+ata2: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1
+ata2: reinit done ..
+unknown: FAILURE - ATA_IDENTIFY timed out LBA=3D0
+ata2: reiniting channel ..
+ata2: SATA connect time=3D0ms status=3D00000113
+ata2: reset tp1 mask=3D01 ostat0=3D58 ostat1=3D00
+ata2: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
+ata2: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1
+ata2: reinit done ..
+unknown: FAILURE - ATA_IDENTIFY timed out LBA=3D0
ata3: Identifying devices: 00000001
ata3: New devices: 00000001
=2DGEOM: new disk ad4
=2Data3-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire
=2Dad6: setting UDMA100
=2Dad6: 476938MB <Seagate ST3500413AS JC45> at ata3-master UDMA100 SATA 1.5=
Gb/s
=2Dad6: 976771055 sectors [969018C/16H/63S] 16 sectors/interrupt 1 depth qu=
eue
+ata3: reiniting channel ..
+ata3: SATA connect time=3D0ms status=3D00000113
+ata3: reset tp1 mask=3D01 ostat0=3D58 ostat1=3D00
+ata3: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
+ata3: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1
+ata3: reinit done ..
+unknown: FAILURE - ATA_IDENTIFY timed out LBA=3D0
+ata3: reiniting channel ..
+ata3: SATA connect time=3D0ms status=3D00000113
+ata3: reset tp1 mask=3D01 ostat0=3D58 ostat1=3D00
+ata3: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
+ata3: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1
+ata3: reinit done ..
+unknown: FAILURE - ATA_IDENTIFY timed out LBA=3D0
hdac0: Probing codec #0...
hdac0: HDA Codec #0: Realtek ALC888
hdac0: HDA Codec ID: 0x10ec0888
@@ -918,6 +964,7 @@
hdac0: Widget cap: 0x00000011
hdac0: STEREO
hdac0: Association: 0 (0x00000001)
+
hdac0: OSS: pcm (pcm)
hdac0: Stream cap: 0x00000001
hdac0: PCM
@@ -957,7 +1004,6 @@
hdac0: PCM cap: 0x000e0560
hdac0: 16 20 24 bits, 44 48 96 192 KHz
hdac0:=20
=2D
hdac0: nid: 6
hdac0: Name: audio output
hdac0: Widget cap: 0x00000211
@@ -1419,6 +1465,7 @@
pcm0: PCM
pcm0: PCM cap: 0x000e0560
pcm0: 16 20 24 bits, 44 48 96 192 KHz
+
pcm0: DAC: 2 3 4 5
pcm0:=20
pcm0: Record:
@@ -1458,7 +1505,6 @@
pcm0:=20
pcm0: nid=3D23 [pin: Line-out (Grey Jack)]
pcm0: |
=2D
pcm0: + <- nid=3D15 [audio mixer] [src: pcm, mix]
pcm0: |
pcm0: + <- nid=3D5 [audio output] [src: pcm]
@@ -1575,8 +1621,8 @@
pcm0: Mixer "igain":
pcm0: Soft PCM mixer ENABLED
pcm0: clone manager: deadline=3D750ms flags=3D0x8000001e
=2Dpcm0: sndbuf_setmap 49e0000, 4000; 0xffffff81b14db000 -> 49e0000
=2Dpcm0: sndbuf_setmap 49f0000, 4000; 0xffffff81b14eb000 -> 49f0000
+pcm0: sndbuf_setmap 1aff90000, 4000; 0xffffff81a4d97000 -> 1aff90000
+pcm0: sndbuf_setmap 1affa0000, 4000; 0xffffff81a4da7000 -> 1affa0000
pcm1: <HDA Realtek ALC888 PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm1: +--------------------------------------+
pcm1: | DUMPING PCM Playback/Record Channels |
@@ -1668,8 +1714,8 @@
pcm1: Mixer "monitor":
pcm1: Soft PCM mixer ENABLED
pcm1: clone manager: deadline=3D750ms flags=3D0x8000001e
=2Dpcm1: sndbuf_setmap 4b10000, 4000; 0xffffff81b14fb000 -> 4b10000
=2Dpcm1: sndbuf_setmap 4b20000, 4000; 0xffffff81b150b000 -> 4b20000
+pcm1: sndbuf_setmap 1affb0000, 4000; 0xffffff81a4db7000 -> 1affb0000
+pcm1: sndbuf_setmap 49f0000, 4000; 0xffffff81a4dc7000 -> 49f0000
pcm2: <HDA Realtek ALC888 PCM #2 Digital> at cad 0 nid 1 on hdac0
pcm2: +--------------------------------------+
pcm2: | DUMPING PCM Playback/Record Channels |
@@ -1717,18 +1763,18 @@
pcm2: Mixer "pcm": parent=3D"vol"
pcm2: Soft PCM mixer ENABLED
pcm2: clone manager: deadline=3D750ms flags=3D0x8000001e
=2Dpcm2: sndbuf_setmap 4b30000, 4000; 0xffffff81b151b000 -> 4b30000
=2Dpcm2: sndbuf_setmap 4b50000, 4000; 0xffffff81b152b000 -> 4b50000
=2DSMP: AP CPU #2 Launched!
=2Dcpu2 AP:
=2D ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
=2D lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
=2D timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
+pcm2: sndbuf_setmap 47c0000, 4000; 0xffffff81a4dd7000 -> 47c0000
+pcm2: sndbuf_setmap 47d0000, 4000; 0xffffff81a4de7000 -> 47d0000
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
+SMP: AP CPU #2 Launched!
+cpu2 AP:
+ ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
+ lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
+ timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
@@ -1742,114 +1788,29 @@
nioapic0: routing intpin 16 (ePCI IRQ 16r) to lapic 3 vector 49
ioapic0: routing intpin 20 (sPCI IRQ 20t) to lapic 1 vector 50
aioapic0: routing intpin 21 (rPCI IRQ 21t) to lapic 2 vector 50
=2Deioapic0: routing intpin 22 (dPCI IRQ 22
=2D) to lapic 3 vector 50
=2Dunknown: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00=20
=2D(probe0:ata0:0:0:unknown: 0): FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x=
24 ascq=3D0x00 uhub0: sks=3D0x48 0x00 0x01
=2D8 ports with 8 removable, self powered
=2DSCSI status error
=2DGEOM: new disk ad6
=2D(probe0:ata0:0:0:0): INQUIRY. CDB: 12 1 0 0 ff 0=20
=2D(probe0:ata0:0:0:0): CAM status: SCSI Status Error
=2D(probe0:ata0:0:0:0): SCSI status: Check Condition
=2D(probe0:ata0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field=
in CDB)
=2D(probe0:ata0:0:0:0): Error 22, Unretryable error
=2D(probe0:ata0:0:0:0): Down reving Protocol Version from 2 to 0?
=2D(probe1:GEOM: ad4s1: geometry does not match label (255h,63s !=3D 16h,63=
s).
=2Data0:0:GEOM: ad4s1: media size does not match label.
=2D1:0): SCSI status error
=2D(probe1:ata0:0:1:0): INQUIRY. CDB: 12 1 0 0 ff 0=20
=2D(probe1:ata0:0:1:0): CAM status: SCSI Status Error
=2D(probe1:ata0:0:1:0): SCSI status: Check Condition
=2D(probe1:ata0:0:1:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field=
in CDB): Command byte 1 bit 0 is invalid
=2D(probe1:ata0:0:1:0): Error 22, Unretryable error
=2D(probe1:ata0:0:1:0): Down reving Protocol Version from 2 to 0?
=2DGEOM: ad6s1: geometry does not match label (255h,63s !=3D 16h,63s).
=2DGEOM: ad6s1: media size does not match label.
=2DGEOM_MIRROR: Device mirror/gm0 launched (2/2).
=2DRoot mount waiting for: usbus1
=2D(probe0:ata0:0:0:0): SCSI status error
=2D(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0=20
=2D(probe0:ata0:0:0:0): CAM status: SCSI Status Error
=2D(probe0:ata0:0:0:0): SCSI status: Check Condition
=2D(probe0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present =
=2D tray closed)
=2D(probe0:ata0:0:0:0): Error 6, Unretryable error
=2DGEOM: new disk cd0
=2Dpass0 at ata0 bus 0 scbus0 target 0 lun 0
=2Dpass0: <ASUS DRW-1814BL 1.13> Removable CD-ROM SCSI-0 device=20
=2Dpass0: 3.300MB/s transfers
=2Duhub1: 8 ports with 8 removable, self powered
=2D(probe1:ata0:0:1:0): SCSI status error
=2D(probe1:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0=20
=2D(probe1:ata0:0:1:0): CAM status: SCSI Status Error
=2D(probe1:ata0:0:1:0): SCSI status: Check Condition
=2D(probe1:ata0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, rese=
t, or bus device reset occurred)
=2D(probe1:ata0:0:1:0): Retrying command (per sense data)
=2D(cd0:ata0:0:0:0): SCSI status error
=2D(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
=2D(cd0:ata0:0:0:0): CAM status: SCSI Status Error
=2D(cd0:ata0:0:0:0): SCSI status: Check Condition
=2D(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - t=
ray closed)
=2D(cd0:ata0:0:0:0): Error 6, Unretryable error
=2Dcd0 at ata0 bus 0 scbus0 target 0 lun 0
=2Dcd0: <ASUS DRW-1814BL 1.13> Removable CD-ROM SCSI-0 device=20
=2Dcd0: 3.300MB/s transfers
=2Dcd0: Attempt to query device size failed: NOT READY, Medium not present =
=2D tray closed
=2D(probe1:ata0:0:1:0): SCSI status error
=2D(probe1:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0=20
=2D(probe1:ata0:0:1:0): CAM status: SCSI Status Error
=2D(probe1:ata0:0:1:0): SCSI status: Check Condition
=2D(probe1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
=2D(probe1:ata0:0:1:0): Error 6, Unretryable error
=2Dpass1 at ata0 bus 0 scbus0 target 1 lun 0
=2Dpass1: <ASUS DRW-1608P3S 1.24> Removable CD-ROM SCSI-0 device=20
=2Dpass1: 3.300MB/s transfers
=2D(cd1:ata0:0:1:0): SCSI status error
=2D(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
=2D(cd1:ata0:0:1:0): CAM status: SCSI Status Error
=2D(cd1:ata0:0:1:0): SCSI status: Check Condition
=2D(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
=2D(cd1:ata0:0:1:0): Error 6, Unretryable error
=2Dcd1 at ata0 bus 0 scbus0 target 1 lun 0
=2Dcd1: <ASUS DRW-1608P3S 1.24> Removable CD-ROM SCSI-0 device=20
=2Dcd1: 3.300MB/s transfers
=2Dcd1: Attempt to query device size failed: NOT READY, Medium not present
=2D(cd0:ata0:0:0:0): SCSI status error
=2D(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
=2D(cd0:ata0:0:0:0): CAM status: SCSI Status Error
=2D(cd0:ata0:0:0:0): SCSI status: Check Condition
=2D(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - t=
ray closed)
=2D(cd0:ata0:0:0:0): Error 6, Unretryable error
=2D(cd0:ata0:0:0:0): SCSI status error
=2D(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
=2D(cd0:ata0:0:0:0): CAM status: SCSI Status Error
=2D(cd0:ata0:0:0:0): SCSI status: Check Condition
=2D(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - t=
ray closed)
=2D(cd0:ata0:0:0:0): Error 6, Unretryable error
=2D(cd0:ata0:0:0:0): SCSI status error
=2D(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
=2D(cd0:ata0:0:0:0): CAM status: SCSI Status Error
=2D(cd0:ata0:0:0:0): SCSI status: Check Condition
=2D(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - t=
ray closed)
=2D(cd0:ata0:0:0:0): Error 6, Unretryable error
=2DGEOM: new disk cd1
=2D(cd1:ata0:0:1:0): SCSI status error
=2D(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
=2D(cd1:ata0:0:1:0): CAM status: SCSI Status Error
=2D(cd1:ata0:0:1:0): SCSI status: Check Condition
=2D(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
=2D(cd1:ata0:0:1:0): Error 6, Unretryable error
=2D(cd1:ata0:0:1:0): SCSI status error
=2D(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
=2D(cd1:ata0:0:1:0): CAM status: SCSI Status Error
=2D(cd1:ata0:0:1:0): SCSI status: Check Condition
=2D(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
=2D(cd1:ata0:0:1:0): Error 6, Unretryable error
=2D(cd1:ata0:0:1:0): SCSI status error
=2D(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
=2D(cd1:ata0:0:1:0): CAM status: SCSI Status Error
=2D(cd1:ata0:0:1:0): SCSI status: Check Condition
=2D(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
=2D(cd1:ata0:0:1:0): Error 6, Unretryable error
+) to lap: routing intpin 22 (dPCI IRQ 22
+ ic 3 vector 50
Trying to mount root from ufs:/dev/mirror/gm0a [rw]...
=2Dstart_init: trying /sbin/init
+mountroot: waiting for device /dev/mirror/gm0a ...
+Mounting from ufs:/dev/mirror/gm0a failed with error 19.
+
+Loader variables:
+ vfs.root.mountfrom=3Dufs:/dev/mirror/gm0a
+ vfs.root.mountfrom.options=3Drw
+
+Manual root filesystem specification:
+ <fstype>:<device> [options]
+ Mount <device> using filesystem <fstype>
+ and with the specified (optional) option list.
+
+ eg. ufs:/dev/da0s1a
+ zfs:tank
+ cd9660:/dev/acd0 ro
+ (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /)
+
+ ? List valid disk boot devices
+ . Yield 1 second (for background tasks)
+ <empty line> Abort manual input
+
+mountroot>=20
+
--Boundary-01=_EjKpNEGvnSpqhAB--
--nextPart3394349.yoO1nZosXY
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.17 (FreeBSD)
iEYEABECAAYFAk2kqMcACgkQUaaFgP9pFrKQ4gCeNAlV3aF7JDzpGCKfk7VD6Gk6
SMUAnjXkXwdhwRnwF0+27RawwgCOYUSG
=FMDh
-----END PGP SIGNATURE-----
--nextPart3394349.yoO1nZosXY--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201104122132.23809.naylor.b.david>