Date: Mon, 12 Mar 2012 14:19:07 -0700 From: YongHyeon PYUN <pyunyh@gmail.com> To: Andreas Longwitz <longwitz@incore.de> Cc: freebsd-net@freebsd.org Subject: Re: Intel 82550 Pro/100 Ethernet and Microcode Message-ID: <20120312211907.GC3671@michelle.cdnetworks.com> In-Reply-To: <4F594856.3030303@incore.de> References: <4F594856.3030303@incore.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Mar 09, 2012 at 01:01:26AM +0100, Andreas Longwitz wrote: > Hi, > > recently I installed FreeBSD 8.2 Stable on some older machines with > Intel 82550 and 82550C and found that the loading of microcode with the > parameter link0 in the ifconfig command did not work anymore. The reason > for this is the commit r223608 for if_fxp.c with the comment: > > Disable microcode loading for 82550 and 82550C controllers. Loading > the microcode caused SCB timeouts. > > I do not agree with this motivation and try to explain why. > > Without loading the microcode on 82550(C) there is a problem with > mount_nfs -U server:/bigdisk /mnt > cp /mnt/bigfile bigfile > > NFS with UDP works with 8 KB blocks and the cp hangs after some seconds > and you see SCB messages on the console. The reason is the TCO bug of > the hardware mentioned in rcvbundl.h. This old hardware bug disappears > after loading the microcode. > > All my hardware run without problems in FreeBSD 4.11, loading of > microcode is done by the function fxp_load_ucode(). Later there was > trouble with the loading of microcode, see kern/103332 and kern/118909. > I have posted my solution for the problem to kern/103332 but > unfortunately this PR is not online anymore and so I repeat my > considerations here. > > The difference of the function fxp_load_ucode() of FreeBSD 4.11 and > later versions is that this function in 4.11 has an own private memory > buffer for construction of the microcode message. In later versions > fxp_load_ucode() must use a memory buffer that is shared with other > parts of the driver and these other parts of the driver have problems if > the shared memory buffer was used by fxp_load_ucode() before. Thats the > reason for "Loading microcode caused SCB timeouts". > > Therefore my proposal is to revert r223608 and to clean the used shared > buffer at the end of the function fxp_load_ucode(). The following patch > works for me for years now: > > --- if_fxp.c.orig 2012-01-26 12:43:09.000000000 +0100 > +++ if_fxp.c 2012-03-08 23:41:32.000000000 +0100 > @@ -3085,6 +3081,7 @@ > sc->tunable_int_delay, > uc->bundle_max_offset == 0 ? 0 : sc->tunable_bundle_max); > sc->flags |= FXP_FLAG_UCODE; > + bzero(cbp, (uc->length + 2) * sizeof(uint32_t)); > } Unfortunately this still does not make any difference on i82550C controller(still spews SCB timeouts). By chance, do you have original i82550? Show me the output of 'pciconf -l'.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120312211907.GC3671>