Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 1 Jun 2012 08:58:48 +0100
From:      Anton Shterenlikht <mexas@bristol.ac.uk>
To:        freebsd-wireless@freebsd.org
Subject:   bwn0: RX decryption attempted (old 0 keyidx 0x1)
Message-ID:  <20120601075848.GA99316@mech-cluster241.men.bris.ac.uk>

next in thread | raw e-mail | index | archive | help
I've this card:

>From pciconf -lv:

siba_bwn0@pci0:48:0:0:	class=0x028000 card=0x1371103c chip=0x431214e4 rev=0x02 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'BCM4311 802.11a/b/g'
    class      = network

>From dmesg:

siba_bwn0: <Broadcom BCM4312 802.11a/b/g Wireless> mem 0xc8100000-0xc8103fff irq 18 at device 0.0 on pci48
siba_bwn0: unsupported coreid (USB 1.1 Host)
bwn0 on siba_bwn0
bwn0: WLAN (chipid 0x4311 rev 13) PHY (analog 4 type 2 rev 9) RADIO (manuf 0x17f ver 0x2050 rev 2)
bwn0: DMA (64 bits)
bwn0: Using 1 MSI messages
bwn0: firmware version (rev 410 patch 2160 date 0x751a time 0x7c0a)
bwn0: status of RF switch is changed to OFF
bwn0: please turn on the RF switch
bwn0: need multicast update callback
bwn0: need multicast update callback
bwn0: need multicast update callback
bwn0: RX decryption attempted (old 0 keyidx 0x1)
bwn0: RX decryption attempted (old 0 keyidx 0x1)

>From ifconfig:

bwn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
	ether 00:1a:73:e1:46:79
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
	media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
	status: associated
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	ether 00:1a:73:e1:46:79
	inet 192.168.1.105 netmask 0xffffff00 broadcast 192.168.1.255 
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
	media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11g
	status: associated
	ssid lagartixa channel 11 (2462 MHz 11g) bssid 00:18:39:e6:46:b6
	country US authmode WPA2/802.11i privacy ON deftxkey UNDEF
	AES-CCM 2:128-bit txpower 30 bmiss 7 scanvalid 450 bgscan
	bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
	wme roaming MANUAL

This is mini-pci (?) card.
It works ok, but I'm swamped with 

bwn0: RX decryption attempted (old 0 keyidx 0x1)

messages on the console.

I suspect that something is not right.

Please advise

Many thanks

-- 
Anton Shterenlikht
Room 2.6, Queen's Building
Mech Eng Dept
Bristol University
University Walk, Bristol BS8 1TR, UK
Tel: +44 (0)117 331 5944
Fax: +44 (0)117 929 4423



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120601075848.GA99316>