Date: Sat, 9 Feb 2013 23:36:15 +0100 From: Hans Petter Selasky <hselasky@c2i.net> To: Paul Schenkeveld <paul@psconsult.nl> Cc: freebsd-usb@freebsd.org Subject: Re: Pencam does not attach Message-ID: <201302092336.15778.hselasky@c2i.net> In-Reply-To: <20130209200403.GA58311@psconsult.nl> References: <20130209125156.GA15557@psconsult.nl> <201302091556.53324.hselasky@c2i.net> <20130209200403.GA58311@psconsult.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Saturday 09 February 2013 21:04:03 Paul Schenkeveld wrote: > On Sat, Feb 09, 2013 at 03:56:53PM +0100, Hans Petter Selasky wrote: > > On Saturday 09 February 2013 13:51:56 Paul Schenkeveld wrote: > > > Hi, > > > > > > I tried to use a USB pen camera with flash drive but get no more than: > > > usbus7: port reset timeout > > > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > > > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port > > > 1 usbd_set_config_index: could not read device status: > > > USB_ERR_STALLED usbd_req_re_enumerate: addr=3, set address failed! > > > (USB_ERR_STALLED, > > > > > > ignored) usbd_req_re_enumerate: addr=3, set address failed! > > > (USB_ERR_STALLED, ignored) usb_alloc_device: Failure selecting > > > configuration index 0:USB_ERR_STALLED, port 1, addr 3 (ignored) > > > ugen7.3: <MagicPixel> at usbus7 > > > > > > ugen7.3: <MagicPixel> at usbus7 (disconnected) > > > > > > It works fine on a Macbook so I know it's not broken. > > > > > > Any chance of getting this to work? > > > > > > BTW I'm running 8.3-STABLE with a kernel built in May 2012. > > > > Hi, > > > > > With kind regards, > > > > You should try 8-stable first. There has been some timing fixes in this > > area. > > Just compiled a 8-STABLE kernel (svn rev 246578). Initially I get the > almost same errors as above: > > usbus7: port reset timeout > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > usbd_set_config_index: could not read device status: USB_ERR_STALLED > usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, > ignored) usbd_req_re_enumerate: addr=3, set address failed! > (USB_ERR_STALLED, ignored) usb_alloc_device: Failure selecting > configuration index 0:USB_ERR_STALLED, port 1, addr 3 (ignored) ugen7.3: > <MagicPixel> at usbus7 > ugen7.3: <MagicPixel> at usbus7 (disconnected) > > > See: sysctl hw.usb.timings > > Could not find documentation but with guessing and trying I got rid of > the first three messages using hw.usb.timings.port_powerup_delay=100: > > usbd_set_config_index: could not read device status: USB_ERR_STALLED > usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, > ignored) usbd_req_re_enumerate: addr=3, set address failed! > (USB_ERR_STALLED, ignored) usb_alloc_device: Failure selecting > configuration index 0:USB_ERR_STALLED, port 2, addr 3 (ignored) ugen7.3: > <MagicPixel> at usbus7 > ugen7.3: <MagicPixel> at usbus7 (disconnected) > > Anything else I should try? Hi, Can you identify the limit at which your device works / does not work by using binary search. Also try to play with the other tunables, and see what happens! --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201302092336.15778.hselasky>