Date: Sat, 23 May 2015 01:42:57 +0200 From: Bernd Walter <ticso@cicely7.cicely.de> To: freebsd-usb@freebsd.org Cc: Bernd Walter <ticso@cicely7.cicely.de> Subject: High-Speed devices listed at XHCI Message-ID: <20150522234257.GD51052@cicely7.cicely.de>
next in thread | raw e-mail | index | archive | help
I'm a bit confused, because so far I'd thought that SS USB Hub topology means that HS/FS/LS is a separate structure sharing the same connector as SS. Now, just a few minutes ago I've added a beafy SS hub with 16 ports (actually 4 port => 4x4 Port in one case) to my system to migrate disks from HS ports to SS, but also connected HS drives to the SS ports. I see all SS hubs twice, as SS and HS hubs, which is understandable with the dual topology, but they are all listed at the XHCI controller and also use 2 addresses on the XHCI. Also the HS devices (or the single SS device with HS only-cable) are listed at the XHCI. [63]cicely1# usbconfig ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.2: <product 0x0024 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen0.2: <product 0x0610 vendor 0x05e3> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (100mA) ugen0.3: <product 0x0610 vendor 0x05e3> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (100mA) ugen0.4: <product 0x0610 vendor 0x05e3> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (100mA) ugen0.5: <product 0x0610 vendor 0x05e3> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (100mA) ugen0.6: <product 0x0610 vendor 0x05e3> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (100mA) ugen0.7: <product 0x0612 vendor 0x05e3> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen0.8: <product 0x0612 vendor 0x05e3> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen0.9: <USB 3.0 Device Intenso> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (36mA) ugen0.10: <USB 3.0 Device Intenso> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (36mA) ugen0.11: <USB 3.0 Device Intenso> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (36mA) ugen0.12: <USB 3.0 Device Intenso> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (36mA) ugen0.13: <product 0x0612 vendor 0x05e3> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen0.14: <USB 3.0 Device Intenso> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (36mA) ugen0.15: <USB 3.0 Device Intenso> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (36mA) ugen0.16: <product 0x0612 vendor 0x05e3> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen0.17: <product 0x0612 vendor 0x05e3> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen0.18: <USB 3.0 Device Intenso> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (0mA) ugen0.19: <USB 3.0 Device Intenso> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (0mA) ugen0.20: <USB 3.0 Device Intenso> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (0mA) ugen0.21: <USB 3.0 Device Intenso> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (0mA) ugen0.22: <External USB 3.0 Intenso> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (2mA) ugen0.23: <External USB 3.0 Intenso> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (2mA) ugen0.24: <TrekStor DS maxi g.u JMicron> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA) ugen0.25: <TrekStor DS maxi g.u JMicron> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA) ugen0.26: <TrekStor DS maxi g.u JMicron> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA) -- B.Walter <bernd@bwct.de> http://www.bwct.de Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20150522234257.GD51052>