Date: Mon, 21 Dec 2015 20:44:57 -0700 From: Sergey Manucharian <sm@ara-ler.com> To: FreeBSD virtualization <freebsd-virtualization@freebsd.org> Subject: Re: bhyve PCI pass-through to Linux guest Message-ID: <20151222034457.GA40078@dendrobates.araler.com> In-Reply-To: <5678BECC.7090200@freebsd.org> References: <20151220045821.GG22018@dendrobates.araler.com> <56763672.3090207@freebsd.org> <20151220051015.GH22018@dendrobates.araler.com> <56763A0B.8010802@freebsd.org> <20151220053644.GI22018@dendrobates.araler.com> <20151220215240.GB4064@dendrobates.araler.com> <5678BECC.7090200@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Excerpts from Peter Grehan's message from Tue 22-Dec-15 13:09:
> Hi Sergey,
>
> > This is pretty reproducible:
> >
> > I pass trough a PCI device (USB controller) to a Linux guest. It works
> > properly. Then I halt the VM, make sure that bhyve destroyed it and run
> > Windows guest with the same PCI device passed-through.
> >
> > Windows device manager does show the device, however, e.g. a flash drive
> > plugged in is not presented to Windows, instead it's being processed by
> > FreeBSD.
> >
> > After that it does not work in Linux guest as well. Kernel module (vmm)
> > unloading and reloading does not help.
>
> The flash drive being processed by FreeBSD would indicate that it has
> ownership of the device. Would you be able to try a 'pciconf -vl' after
> the Linux guest exists, and after the Windows guest exits ?
OK, I've experimented more and found that even with the same Linux VM
after halting it once, the pass-through device doesn't work when that
Linux guest is restarted again.
It looks that both host and guest report exactly the same data before and
after restarting the guest:
Linux - first run:
=================
$ lspci -v
00:07.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo Device 21f3
Flags: bus master, medium devsel, latency 0, IRQ 24
Memory at c0010000 (64-bit, prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Kernel driver in use: xhci_hcd
$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 0781:5530 SanDisk Corp. Cruzer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
FreeBSD when Linux is running first time:
=========================================
$ pciconf -v
ppt0@pci0:0:20:0: class=0x0c0330 card=0x21f317aa chip=0x1e318086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '7 Series/C210 Series Chipset Family USB xHCI Host
Controller'
class = serial bus
subclass = USB
Linux - second run:
===================
$ lspci -v
00:07.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo Device 21f3
Flags: bus master, medium devsel, latency 0, IRQ 24
Memory at c0010000 (64-bit, prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Kernel driver in use: xhci_hcd
FreeBSD when Linux is running second time:
==========================================
$ pciconf -lv
ppt0@pci0:0:20:0: class=0x0c0330 card=0x21f317aa chip=0x1e318086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '7 Series/C210 Series Chipset Family USB xHCI Host
Controller'
class = serial bus
subclass = USB
--
Thanks,
Sergey
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20151222034457.GA40078>