Date: Sun, 28 Feb 2016 10:56:33 -0600 From: Larry Rosenman <ler@lerctr.org> To: freebsd-current@freebsd.org Subject: Mouse on Inspiron ? Message-ID: <20160228165632.GA1265@lrosenman-dell2.lerctr.org>
next in thread | raw e-mail | index | archive | help
--/9DWx/yDrRhgMJTb
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
I have a Dell Inspiron 5748 running -CURRENT, and I can't seem to get the mouse (trackpad)
to work.
I'm not sure where it's hiding. I don't see a /dev/psm0, but do see a /dev/sysmouse.
Ideas?
I'll attach a dmesg, and here's a pciconf -lv:
hostb0@pci0:0:0:0: class=0x060000 card=0x06511028 chip=0x0a048086 rev=0x0b hdr=0x00
vendor = 'Intel Corporation'
device = 'Haswell-ULT DRAM Controller'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:0:2:0: class=0x030000 card=0x06511028 chip=0x0a168086 rev=0x0b hdr=0x00
vendor = 'Intel Corporation'
device = 'Haswell-ULT Integrated Graphics Controller'
class = display
subclass = VGA
hdac0@pci0:0:3:0: class=0x040300 card=0x06511028 chip=0x0a0c8086 rev=0x0b hdr=0x00
vendor = 'Intel Corporation'
device = 'Haswell-ULT HD Audio Controller'
class = multimedia
subclass = HDA
none0@pci0:0:22:0: class=0x078000 card=0x06511028 chip=0x9c3a8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series HECI'
class = simple comms
hdac1@pci0:0:27:0: class=0x040300 card=0x06511028 chip=0x9c208086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series HD Audio Controller'
class = multimedia
subclass = HDA
pcib1@pci0:0:28:0: class=0x060400 card=0x06511028 chip=0x9c108086 rev=0xe4 hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series PCI Express Root Port 1'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:28:2: class=0x060400 card=0x06511028 chip=0x9c148086 rev=0xe4 hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series PCI Express Root Port 3'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:28:3: class=0x060400 card=0x06511028 chip=0x9c168086 rev=0xe4 hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series PCI Express Root Port 4'
class = bridge
subclass = PCI-PCI
ehci0@pci0:0:29:0: class=0x0c0320 card=0x06511028 chip=0x9c268086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series USB EHCI'
class = serial bus
subclass = USB
isab0@pci0:0:31:0: class=0x060100 card=0x06511028 chip=0x9c438086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series LPC Controller'
class = bridge
subclass = PCI-ISA
ahci0@pci0:0:31:2: class=0x010601 card=0x06511028 chip=0x9c038086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series SATA Controller 1 [AHCI mode]'
class = mass storage
subclass = SATA
ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x06511028 chip=0x9c228086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series SMBus Controller'
class = serial bus
subclass = SMBus
iwn0@pci0:6:0:0: class=0x028000 card=0x00628086 chip=0x08928086 rev=0xc4 hdr=0x00
vendor = 'Intel Corporation'
device = 'Centrino Wireless-N 135'
class = network
re0@pci0:7:0:0: class=0x020000 card=0x06511028 chip=0x813610ec rev=0x07 hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller'
class = network
subclass = ethernet
--
Larry Rosenman http://www.lerctr.org/~ler
Phone: +1 214-642-9640 E-Mail: ler@lerctr.org
US Mail: 7011 W Parmer Ln, Apt 1115, Austin, TX 78729-6961
--/9DWx/yDrRhgMJTb
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.boot"
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r296155: Sun Feb 28 07:52:00 CST 2016
root@lrosenman-dell2:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.7.1 (tags/RELEASE_371/final 255217) 20151225
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1600x900
CPU: Intel(R) Core(TM) i3-4030U CPU @ 1.90GHz (1895.66-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8148996096 (7771 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL WN09>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-39 on motherboard
Cuse v0.1.34 @ /dev/cuse
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ee3b40, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <DELL WN09 > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf7e04000-0xf7e07fff irq 16 at device 3.0 on pci0
pci0: <simple comms> at device 22.0 (no driver attached)
hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf7e00000-0xf7e03fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib2
iwn0: <Intel Centrino Wireless-N 135> mem 0xf7d00000-0xf7d01fff irq 18 at device 0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 810xE PCIe 10/100baseTX> port 0xe000-0xe0ff mem 0xf7c00000-0xf7c00fff,0xf0000000-0xf0003fff irq 19 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x44800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rlphy0: <RTL8201E 10/100 media interface> PHY 1 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 74:e6:e2:11:77:8e
re0: netmap queues/slots: TX 1/256, RX 1/256
ehci0: <Intel Lynx Point LP USB 2.0 controller USB> mem 0xf7e0b000-0xf7e0b3ff irq 23 at device 29.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7e0a000-0xf7e0a7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0xf040-0xf05f mem 0xf7e09000-0xf7e090ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek (0x0255) HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek (0x0255) Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek (0x0255) (Internal Analog)> at nid 20 and 18 on hdaa1
pcm2: <Realtek (0x0255) (Front Analog Headphones)> at nid 33 on hdaa1
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD5000LPVX-75V0TT0 01.01A01> ACS-2 ATA SATA 3.x device
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <MATSHITA DVD+-RW UJ8E2 1.01> Removable CD-ROM SCSI device
cd0: Serial Number H086 038887
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ada0: Serial Number WXC1E64E8Z3R
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI> UCP/8/48/0x3f8<EDG,THR,REA,WRI,INV,QUA,PRC> UCF/1/48/0x60<REA,WRI>
Timecounter "TSC" frequency 1895659404 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <vendor 0x8087> at usbus0
uhub1: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus0
uhub1: 8 ports with 8 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <CNFDH85F3040100020S2> at usbus0
Root mount waiting for: usbus0
ugen0.4: <vendor 0x8087> at usbus0
ugen0.5: <Generic> at usbus0
wlan0: Ethernet address: 0c:d2:92:96:98:a3
iwn0: iwn_read_firmware: ucode rev=0x12a80601
iwn0: iwn_read_firmware: ucode rev=0x12a80601
wlan0: link state changed to UP
re0: link state changed to DOWN
ubt0: <vendor 0x8087 product 0x07da, class 224/1, rev 2.00/78.69, addr 4> on usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
--/9DWx/yDrRhgMJTb--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20160228165632.GA1265>