Date: Tue, 23 Jan 2018 17:56:14 +0900 From: KIRIYAMA Kazuhiko <kiri@kx.openedu.org> To: Pete Wright <pete@nomadlogic.org> Cc: KIRIYAMA Kazuhiko <kiri@kx.openedu.org>, x11@FreeBSD.org Subject: Re: Intel HD Graphics 400 (Ver. 2.19.15.4444) failed Message-ID: <201801230856.w0N8uEdJ009942@kx.openedu.org> In-Reply-To: <201801230709.w0N795Vc008022@kx.openedu.org> References: <201801230225.w0N2Po2P002714@kx.openedu.org> <6a7c0e1e-7b81-c344-a0a4-1fbbf25298f2@nomadlogic.org> <201801230709.w0N795Vc008022@kx.openedu.org>
next in thread | previous in thread | raw e-mail | index | archive | help
At Tue, 23 Jan 2018 16:09:05 +0900, $B;d(B wrote: > > At Mon, 22 Jan 2018 20:48:59 -0800, > Pete Wright wrote: > > > > > > > > On 01/22/2018 18:25, KIRIYAMA Kazuhiko wrote: > > > Hi all, > > > > > > I've installed FreeBSD 12.0-CURRENT(r328126) to my note PC > > > (SG116j[1]) and then installed > > > xf86-video-intel-2.99.917.20170228_1 > > > (x11-drivers/xf86-video-intel): > > > > > > root@t:~ # uname -v > > > FreeBSD 12.0-CURRENT #0 r328126: Thu Jan 18 15:25:44 UTC 2018 root@releng3.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC > > > root@t:~ # pkg info -aI|grep intel > > > xf86-video-intel-2.99.917.20170228_1 Driver for Intel integrated graphics chipsets > > > > > > And test to run X as follows: > > > > > > root@t:~ # X -configure > > > > > > X.Org X Server 1.18.4 > > > Release Date: 2016-07-19 > > > X Protocol Version 11, Revision 0 > > > Build Operating System: FreeBSD 12.0-CURRENT amd64 > > > Current Operating System: FreeBSD t.pis 12.0-CURRENT FreeBSD 12.0-CURRENT #0 r328126: Thu Jan 18 15:25:44 UTC 2018 root@releng3.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64 > > > Build Date: 05 January 2018 04:01:52AM > > > > > > Current version of pixman: 0.34.0 > > > Before reporting problems, check http://wiki.x.org > > > to make sure that you have the latest version. > > > Markers: (--) probed, (**) from config file, (==) default setting, > > > (++) from command line, (!!) notice, (II) informational, > > > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > > > (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 23 10:58:05 2018 > > > List of video drivers: > > > scfb > > > vesa > > > modesetting > > > intel > > > scfb trace: probe start > > > (++) Using config file: "/root/xorg.conf.new" > > > > > > > > > Xorg detected your mouse at device /dev/sysmouse. > > > Please check your config if the mouse is still not > > > operational, as by default Xorg tries to autodetect > > > the protocol. > > > > > > Your xorg.conf file is /root/xorg.conf.new > > > > > > To test the server, run 'X -config /root/xorg.conf.new' > > > > > > (EE) Server terminated with error (2). Closing log file. > > > > > > root@t:~ # X -config xorg.conf.new > > > > > > X.Org X Server 1.18.4 > > > Release Date: 2016-07-19 > > > X Protocol Version 11, Revision 0 > > > Build Operating System: FreeBSD 12.0-CURRENT amd64 > > > Current Operating System: FreeBSD t.pis 12.0-CURRENT FreeBSD 12.0-CURRENT #0 r328126: Thu Jan 18 15:25:44 UTC 2018 root@releng3.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64 > > > Build Date: 05 January 2018 04:01:52AM > > > > > > Current version of pixman: 0.34.0 > > > Before reporting problems, check http://wiki.x.org > > > to make sure that you have the latest version. > > > Markers: (--) probed, (**) from config file, (==) default setting, > > > (++) from command line, (!!) notice, (II) informational, > > > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > > > (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 23 11:10:17 2018 > > > (++) Using config file: "xorg.conf.new" > > > (EE) > > > Fatal server error: > > > (EE) no screens found(EE) > > > (EE) > > > Please consult the The X.Org Foundation support > > > at http://wiki.x.org > > > for help. > > > (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. > > > (EE) > > > (EE) Server terminated with error (1). Closing log file. > > > root@t:~ # > > > > > > Xorg.0.log was up to [2]. Does Intel HD Graphics 400 still > > > not support yet? > > > > I have similar hardware that is supported on current via the > > "drm-next-kmod" port/pkg: > > https://www.freshports.org/graphics/drm-next-kmod/ > > > > be sure to follow the instructions in the pkg-message to get things > > working, it should load the bits required (as a kernel module) to allow > > you to use either the xf86-video-intel ddx that you've already installed > > or the modesetting Xorg driver (which is getting more attention upstream > > by the Xorg team)..AN the modesetting driver comes bundled with the > > xorg-server port/pkg, so no need to install any additional software to > > use that graphics driver. > > > > invoking xorg or startx without any existing xorg.conf in place should > > autodetect pretty much everything automagically as well. having said > > I've installed drm-next-kmod-g20171006_1 > (graphics/drm-next-kmod) and "rm /etc/X11/xorg.conf" then > "startx", very fine graphics displayed! The rezolution is > a full HD 1920x1080. Great!!! > > root@t:~ # xwininfo > > xwininfo: Please select the window about which you > would like information by clicking the > mouse in that window. > > xwininfo: Window id: 0xcd (the root window) (has no name) > > Absolute upper-left X: 0 > Absolute upper-left Y: 0 > Relative upper-left X: 0 > Relative upper-left Y: 0 > Width: 1920 > Height: 1080 > Depth: 24 > Visual: 0x21 > Visual Class: TrueColor > Border width: 0 > Class: InputOutput > Colormap: 0x20 (installed) > Bit Gravity State: ForgetGravity > Window Gravity State: NorthWestGravity > Backing Store State: NotUseful > Save Under State: no > Map State: IsViewable > Override Redirect State: no > Corners: +0+0 -0+0 -0-0 +0-0 > -geometry 1920x1080+0+0 > > root@t:~ # > > > that - you can still use an xorg.conf to set things up to suit your > > local config. > > I don't know about local config. Does "local config" means merely > localtion of xorg.conf? > At any rate, set it at /etc/X11/xorg.conf, then X does not work ;-( I reboot PC and startx then failed to start(full log at [1]): [ 1331.128] (EE) open /dev/dri/card0: No such file or directory [ 1331.128] (WW) Falling back to old probe method for modesetting [ 1331.129] (EE) open /dev/dri/card0: No such file or directory [ 1331.129] (WW) Falling back to old probe method for scfb [ 1331.129] scfb trace: probe start [ 1331.129] (II) scfb(1): using default device [ 1331.129] scfb trace: probe done [ 1331.129] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 1331.129] (EE) Screen 0 deleted because of no matching config section. [ 1331.129] (II) UnloadModule: "modesetting" [ 1331.129] (EE) Fatal server error: [ 1331.129] (EE) Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices [ 1331.130] (EE) [ 1331.130] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 1331.130] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 1331.130] (EE) [ 1331.131] (EE) Server terminated with error (1). Closing log file. Is /dev/dri/card0 automatically created? Regards [1] http://ds.truefc.org/~kiri/freebsd/sg116j/Xorg.0.log --- KIRIYAMA Kazuhiko > > > > > hope this helps! > > -pete > > Thanx Pete!!! > > > > > -- > > Pete Wright > > pete@nomadlogic.org > > @nomadlogicLA > > > > --- > KIRIYAMA Kazuhiko >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201801230856.w0N8uEdJ009942>