Date: Wed, 18 Jul 2018 13:01:57 -0400 From: Diane Bruce <db@db.net> To: Per olof Ljungmark <peo@nethead.se> Cc: freebsd-arm@freebsd.org Subject: Re: rpi3 and Adafruit GPS Hat Message-ID: <20180718170157.GA40221@night.db.net> In-Reply-To: <47f49a55-66b0-1c02-4530-4701a3bd0c43@nethead.se> References: <47f49a55-66b0-1c02-4530-4701a3bd0c43@nethead.se>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jul 18, 2018 at 05:10:16PM +0200, Per olof Ljungmark wrote: > Being a complete newbie to arm I thought a nice project would be to > build a NTP server with the parts in the subject line. > > Unfortunately I have almost no idea where to start, it seems FreeBSD for > arm have shifted around quite a bit, almost none of the googled pages I > find has relevance, and to add insult to injury, the Pi project > apparently shifted the serial ports around for the Pi3. > > What I need to achieve, > > - Stop the kernel to use the uart for console output (I have ethernet > and HDMI connected) No need. change your config.txt #dtoverlay=pi3-disable-bt device_tree_address=0x4000 kernel=u-boot.bin enable_uart=1 This moves the console port to the less capable micro uart port this will free up the good uart (the pl011 device) as /dev/ttyu0 Remove the pi3-disable-dt in config.txt enable_uart=1 is needed. > VERY grateful if someone that knows better can give me a push in the > right direction for up to date information. .. This is assuming you use FreeBSD-12 (Head of tree) > -- > Per olof Ljungmark Diane -- - db@FreeBSD.org db@db.net http://www.db.net/~db
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20180718170157.GA40221>