Date: Tue, 5 Nov 2019 15:19:42 -0500 From: Chris Ross <cross+freebsd@distal.com> To: Miroslav Lachman <000.fbsd@quip.cz> Cc: Chris Ross <cross+freebsd@distal.com>, freebsd-stable@freebsd.org Subject: Re: Cisco 12G SAS RAID support (FreeBSD 12.1-RELEASE) ? Message-ID: <20191105201942.GF1177@westeros.distal.com> In-Reply-To: <65e90493-a038-5668-45e9-5101c52c23eb@quip.cz> References: <20191105183448.GE1177@westeros.distal.com> <65e90493-a038-5668-45e9-5101c52c23eb@quip.cz>
index | next in thread | previous in thread | raw e-mail
On Tue, Nov 05, 2019 at 08:20:15PM +0100, Miroslav Lachman wrote:
> Chris Ross wrote on 11/05/2019 19:34:
> > Hello. I have a Cisco UCS C220-M5 with a RAID controller. It calls itself
> > "Cisco 12G Modular Raid Controller with 2GB cache", PPID UCSC-RAID-M5.
> > Looking at the CIMC, it shows the PCI vendor/device ids 1000:0014, which
> > looks to be an LSI MegaRAID Tri-Mode SAS3516. It looks like this should
> > be supported by the mpr(4) driver, but it doesn't seem to recognize it
> > at boot time.
>
> Do you have mpr_load="YES" in loader.conf?
> Or for ISO booting you can manually load kernel modules at boot prompt.
I dropped to boot prompt in ISO boot, and entered 'mpr_load="YES"'.
I tried "load", but wasn't able to devine how to load the mpr module with
that. Is that needed, or should 'mpr_load="YES"' have accomplished the
desired result?
- Chris
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20191105201942.GF1177>