Date: Fri, 25 Dec 2020 09:02:19 +0900 From: Tomoaki AOKI <junchoon@dec.sakura.ne.jp> To: freebsd-current@freebsd.org Cc: Marc Veldman <marc@bumblingdork.com> Subject: Re: Boot panic on Lenovo P50s since r367998 Message-ID: <20201225090219.d98fa1ce21d600f0da606e29@dec.sakura.ne.jp> In-Reply-To: <89112D93-739D-45B5-B21A-3396C098A89B@bumblingdork.com> References: <89112D93-739D-45B5-B21A-3396C098A89B@bumblingdork.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 24 Dec 2020 10:34:49 +0100 Marc Veldman <marc@bumblingdork.com> wrote: > Hello, > > since r367998 my Lenovo P50s panics on boot: > > mmc0: detached > panic: Bad link elm 0xfffff80003a73300 next->prep != elm > cupid=3 > time=2 > KDB: stack backtrace: > db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffffff8299a9c0 > vpanic() at vpanic+0x181/frame 0xffffffff8299aa10 > panic() at panic+0x43/frame 0xffffffff8299aa70 > config_intrhook_disestablish() at config_intrhook_disestablish+0xf3/frame 0xffffffff8299aa90 > config_intrhook_oneshot_func() at config_intrhook_oneshot_func+0x18/frame 0xffffffff8299aab0 > run_interrupt_driven_config_hooks() at run_interrupt_driven_config_hooks+0x77/frame 0xffffffff8299aad0 > boot_run_interrupt_driven_config_hooks() at boot_run_interrupt_driven_config_hooks+0x1f/frame 0xffffffff8299ab60 > mi_startup() at mi_startup+0xec/frame 0xffffffff8299abb0 > btext() at btext+0x2c > KDB: enter: panic > [thread pid 0 tid 100000] > Stopped at kdb_enter+0x37: movq $0,0x10ada46(%rip) > > If needed, I can test patches > > Dmesg (with r367977 kernel) > > ---<<BOOT>>--- > Copyright (c) 1992-2020 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 13.0-CURRENT #0 r367997: Tue Dec 22 16:47:30 CET 2020 > root@devnovo:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64 > FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673) > WARNING: WITNESS option enabled, expect reduced performance. > VT(efifb): resolution 1920x1080 > CPU: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz (2592.10-MHz K8-class CPU) > Origin="GenuineIntel" Id=0x406e3 Family=0x6 Model=0x4e Stepping=3 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> > AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> > AMD Features2=0x121<LAHF,ABM,Prefetch> > Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> > Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> > XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> > VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID > TSC: P-state invariant, performance statistics > real memory = 17179869184 (16384 MB) > avail memory = 16421109760 (15660 MB) > Event timer "LAPIC" quality 600 > ACPI APIC Table: <LENOVO TP-N1K > > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads > random: registering fast source Intel Secure Key RNG > random: fast provider: "Intel Secure Key RNG" > random: unblocking device. > ioapic0 <Version 2.0> irqs 0-119 > Launching APs: 1 3 2 > Timecounter "TSC-low" frequency 1296050980 Hz quality 1000 > random: entropy device external interface > WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0. > kbd1 at kbdmux0 > 000.000045 [4346] netmap_init netmap: loaded module > [ath_hal] loaded > nexus0 > efirtc0: <EFI Realtime Clock> > efirtc0: registered as a time-of-day clock, resolution 1.000000s > cryptosoft0: <software crypto> > aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> > acpi0: <LENOVO TP-N1K> > acpi_ec0: <Embedded Controller: GPE 0x16, ECDT> port 0x62,0x66 on acpi0 > acpi0: Power Button (fixed) > cpu0: <ACPI CPU> on acpi0 > attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 24000000 Hz quality 950 > Event timer "HPET" frequency 24000000 Hz quality 550 > Event timer "HPET1" frequency 24000000 Hz quality 440 > Event timer "HPET2" frequency 24000000 Hz quality 440 > Event timer "HPET3" frequency 24000000 Hz quality 440 > Event timer "HPET4" frequency 24000000 Hz quality 440 > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > atrtc0: registered as a time-of-day clock, resolution 1.000000s > Event timer "RTC" frequency 32768 Hz quality 0 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_button0: <Sleep Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > vgapci0: <VGA-compatible display> port 0xe000-0xe03f mem 0xf2000000-0xf2ffffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 > vgapci0: Boot video device > xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xf4220000-0xf422ffff at device 20.0 on pci0 > xhci0: 32 bytes context size, 64-bit DMA > usbus0 on xhci0 > usbus0: 5.0Gbps Super Speed USB v3.0 > pci0: <simple comms> at device 22.0 (no driver attached) > ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xe080-0xe087,0xe088-0xe08b,0xe060-0xe07f mem 0xf4248000-0xf4249fff,0xf424f000-0xf424f0ff,0xf424d000-0xf424d7ff at device 23.0 on pci0 > ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported > ahcich1: <AHCI channel> at channel 1 on ahci0 > pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pci1: <unknown> at device 0.0 (no driver attached) > pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 > pci2: <ACPI PCI bus> on pcib2 > pci2: <network> at device 0.0 (no driver attached) > pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > vgapci1: <VGA-compatible display> port 0xd000-0xd07f mem 0xf3000000-0xf3ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff at device 0.0 on pci3 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > pci0: <memory> at device 31.2 (no driver attached) > hdac0: <Intel Sunrise Point-LP HDA Controller> mem 0xf4240000-0xf4243fff,0xf4230000-0xf423ffff at device 31.3 on pci0 > em0: <Intel(R) PRO/1000 Network Connection> mem 0xf4200000-0xf421ffff at device 31.6 on pci0 > em0: Using 1024 TX descriptors and 1024 RX descriptors > em0: Using an MSI interrupt > em0: Ethernet address: 54:ee:75:cb:0d:e3 > em0: netmap queues/slots: TX 1/1024, RX 1/1024 > acpi_tz0: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 13.0. > psm0: model Synaptics Touchpad, device ID 0 > battery0: <ACPI Control Method Battery> on acpi0 > battery1: <ACPI Control Method Battery> on acpi0 > acpi_acad0: <AC Adapter> on acpi0 > orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 > hwpstate_intel0: <Intel Speed Shift> on cpu0 > hwpstate_intel1: <Intel Speed Shift> on cpu1 > hwpstate_intel2: <Intel Speed Shift> on cpu2 > hwpstate_intel3: <Intel Speed Shift> on cpu3 > Timecounters tick every 1.000 msec > ZFS filesystem version: 5 > ZFS storage pool version: features support (5000) > hdacc0: <Realtek ALC293 HDA CODEC> at cad 0 on hdac0 > ugen0.1: <0x8086 XHCI root HUB> at usbus0 > hdaa0: <Realtek ALC293 Audio Function Group> at nid 1 on hdacc0 > pcm0: <Realtek ALC293 (Analog)> at nid 20 and 26 on hdaa0 > pcm1: <Realtek ALC293 (Analog)> at nid 21 and 18 on hdaa0 > hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 > hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 > pcm2: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 > Trying to mount root from zfs:zroot/ROOT/default []... > Root mount waiting for: usbus0 CAM > WARNING: WITNESS option enabled, expect reduced performance. > uhub0 on usbus0 > uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 > ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 > ada0: <Samsung SSD 850 PRO 512GB EXM04B6Q> ACS-2 ATA SATA 3.x device > ada0: Serial Number S39FNX0J625463T > ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) > ada0: Command Queueing enabled > ada0: 488386MB (1000215216 512 byte sectors) > ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> > GEOM_ELI: Device ada0p4.eli created. > GEOM_ELI: Encryption: AES-XTS 256 > GEOM_ELI: Crypto: accelerated software > uhub0: 18 ports with 18 removable, self powered > Root mount waiting for: usbus0 > ugen0.2: <Prolific Technology Inc. USB-Serial Controller> at usbus0 > Root mount waiting for: usbus0 > ugen0.3: <vendor 0x8087 product 0x0a2b> at usbus0 > ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 > Root mount waiting for: usbus0 > ugen0.5: <vendor 0x138a product 0x0017> at usbus0 > lo0: link state changed to UP > pchtherm0: <Skylake PCH Thermal Subsystem> mem 0xf424b000-0xf424bfff at device 20.2 on pci0 > iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xf4000000-0xf4001fff at device 0.0 on pci2 > iwm0: hw rev 0x200, fw ver 22.361476.0, address f4:8c:50:50:22:83 > ichsmb0: <Intel Sunrise Point-LP SMBus controller> port 0xefa0-0xefbf mem 0xf424e000-0xf424e0ff at device 31.4 on pci0 > smbus0: <System Management Bus> on ichsmb0 > acpi_wmi0: <ACPI-WMI mapping> on acpi0 > acpi_wmi0: Embedded MOF found > ACPI: \134_SB.WMI1.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) > acpi_wmi1: <ACPI-WMI mapping> on acpi0 > acpi_wmi1: Embedded MOF found > ACPI: \134_SB.WMI2.WQBB: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) > acpi_wmi2: <ACPI-WMI mapping> on acpi0 > acpi_wmi2: Embedded MOF found > ACPI: \134_SB.WMI3.WQBC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) > uplcom0 on uhub0 > uplcom0: <Prolific Technology Inc. USB-Serial Controller, class 0/0, rev 1.10/3.00, addr 1> on usbus0 > wlan0: Ethernet address: f4:8c:50:50:22:83 > ng_ubt: HCI command 0xfc05 timed out > ubt0 on uhub0 > ubt0: <vendor 0x8087 product 0x0a2b, class 224/1, rev 2.00/0.01, addr 2> on usbus0 > wlan0: link state changed to UP > WARNING: attempt to domain_add(bluetooth) after domainfinalize() > WARNING: attempt to domain_add(netgraph) after domainfinalize() > iwm0: code ce, frame 2/216 b800002c unhandled > Security policy loaded: MAC/ntpd (mac_ntpd) > > _______________________________________________ > freebsd-current@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" Hi. You would be bitten by a known issue with ThinkPad P50s described in rtsx (4) man page. Try adding dev.rtsx.0.inversion=1 in /boot/loader.conf. Unfortunately, man pages for head cannot read via FreeBSD project top page. So read raw manpage data with svn commit mail archive below. https://lists.freebsd.org/pipermail/svn-src-head/2020-November/141972.html In addition, write attempts to write-protected card causes 100% panic. For example, sysutils/automount trys fsck on mount. This causes 100% panic (not only rtsx, but every adapters), avoidable by write-protect off. -- Tomoaki AOKI <junchoon@dec.sakura.ne.jp>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20201225090219.d98fa1ce21d600f0da606e29>