Date: Wed, 19 May 2010 20:04:40 -0700 (PDT) From: subgeometer <biggerbumme@yahoo.co.in> To: freebsd-acpi@freebsd.org Subject: Re: Problem network devices Acer Extensa 5635G Message-ID: <28616663.post@talk.nabble.com> In-Reply-To: <4BE94278.1010101@FreeBSD.org> References: <201004122301.45040.g.veniamin@googlemail.com> <28494831.post@talk.nabble.com> <4BE94278.1010101@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
dmesg output from acer Extensa 5635Z running freeBSD-8.0-RELEASE is as follows: Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-RELEASE #1: Sun May 9 23:03:50 EST 2010 root@:/usr/obj/usr/src/sys/acer5635z Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz (2095.00-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x400e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 4294967296 (4096 MB) avail memory = 3995230208 (3810 MB) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard wlan: mac acl policy registered netsmb_dev: loaded kbd1 at kbdmux0 acpi0: <ACRSYS ACRPRDCT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) unknown: I/O range not supported acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 acpi_ec0: warning: EC done before starting event wait acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf0000000-0xf03fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 agp0: <Intel GM45 SVGA controller> on vgapci0 agp0: detected 65532k stolen memory agp0: aperture size is 256M drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0 info: [drm] MSI enabled 1 message(s) vgapci0: child drm0 requested pci_enable_busmaster info: [drm] AGP at 0xd0000000 256MB info: [drm] Initialized i915 1.6.0 20080730 vgapci1: <VGA-compatible display> mem 0xf0400000-0xf04fffff at device 2.1 on pci0 uhci0: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 16 at device 26.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup = 0x003b usbus0: <Intel 82801I (ICH9) USB controller> on uhci0 uhci1: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 21 at device 26.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup = 0x0010 usbus1: <Intel 82801I (ICH9) USB controller> on uhci1 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf0904800-0xf0904bff irq 19 at device 26.7 on pci0 ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci7: <ACPI PCI bus> on pcib2 ath0: <Atheros 9280> irq 19 at device 0.0 on pci7 ath0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff). ath0: cannot map register space device_attach: ath0 attach returned 6 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pci9: <ACPI PCI bus> on pcib3 alc0: <Atheros AR8131 PCIe Gigabit Ethernet> irq 17 at device 0.0 on pci9 alc0: 0x40000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff). alc0: cannot allocate memory resources. device_attach: alc0 attach returned 6 uhci2: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 23 at device 29.0 on pci0 uhci2: [ITHREAD] uhci2: LegSup = 0x003b usbus3: <Intel 82801I (ICH9) USB controller> on uhci2 uhci3: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 19 at device 29.1 on pci0 uhci3: [ITHREAD] uhci3: LegSup = 0x0010 usbus4: <Intel 82801I (ICH9) USB controller> on uhci3 uhci4: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 18 at device 29.2 on pci0 uhci4: [ITHREAD] uhci4: LegSup = 0x0010 usbus5: <Intel 82801I (ICH9) USB controller> on uhci4 uhci5: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 16 at device 29.3 on pci0 uhci5: [ITHREAD] uhci5: LegSup = 0x0010 usbus6: <Intel 82801I (ICH9) USB controller> on uhci5 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf0904c00-0xf0904fff irq 23 at device 29.7 on pci0 ehci1: [ITHREAD] usbus7: EHCI version 1.0 usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci10: <ACPI PCI bus> on pcib4 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel AHCI controller> port 0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x18e0-0x18ff mem 0xf0904000-0xf09047ff irq 19 at device 31.2 on pci0 atapci0: [ITHREAD] atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM supported ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ata4: <ATA channel 4> on atapci0 ata4: [ITHREAD] ata5: <ATA channel 5> on atapci0 ata5: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xe0000-0xe17ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ad4: 305245MB <WDC WD3200BEVT-22ZCT0 11.01A11> at ata2-master SATA300 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <Intel> at usbus7 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 GEOM: ad4: partition 3 does not start on a track boundary. GEOM: ad4: partition 3 does not end on a track boundary. GEOM: ad4: partition 2 does not start on a track boundary. GEOM: ad4: partition 2 does not end on a track boundary. acd0: DVDR <Optiarc DVD RW AD-7580S/FX04> at ata3-master SATA150 SMP: AP CPU #1 Launched! WARNING: ad4s1 expected rawoffset 0, found 63 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered WARNING: ad4s1a expected rawoffset 0, found 63 uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered Root mount waiting for: usbus7 usbus2 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus7 uhub7: 8 ports with 8 removable, self powered Root mount waiting for: usbus7 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 ugen7.2: <SuYin> at usbus7 Trying to mount root from ufs:/dev/ad4s1a (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata1:0:0:0): CAM Status: SCSI Status Error (probe0:ata1:0:0:0): SCSI Status: Check Condition (probe0:ata1:0:0:0): NOT READY asc:3a,1 (probe0:ata1:0:0:0): Medium not present - tray closed (probe0:ata1:0:0:0): Unretryable error cd0 at ata1 bus 0 target 0 lun 0 cd0: <Optiarc DVD RW AD-7580S FX04> Removable CD-ROM SCSI-0 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed ugen2.2: <Verbatim> at usbus2 umass0: <Verbatim STORE N GO, class 0/0, rev 2.00/1.00, addr 2> on usbus2 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:2:0:-1: Attached to scbus2 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Verbatim STORE N GO 5.00> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 1909MB (3909632 512 byte sectors: 255H 63S/T 243C) GEOM: da0: partition 1 does not end on a track boundary. GEOM: da0: partition 1 does not end on a track boundary. This is with a non-GENERIC kernel, no options were remove from the default, just some extra options added, I will supply the config file if necessary. The ath0 output etc seems to be the same as with GENERIC Thanks, John O'Driscoll -- View this message in context: http://old.nabble.com/Problem-network-devices-Acer-Extensa-5635G-tp28219409p28616663.html Sent from the freebsd-acpi mailing list archive at Nabble.com.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?28616663.post>