Date: Thu, 17 May 2007 00:02:11 -0700 From: "Jack Vogel" <jfvogel@gmail.com> To: "Eygene Ryabinkin" <rea-fbsd@codelabs.ru> Cc: jfv@freebsd.org, freebsd-net@freebsd.org Subject: Re: Port of the new em(4) to RELENG_6 and some problems with 82540EM Message-ID: <2a41acea0705170002i46d4356ar5579d0bb996f9f67@mail.gmail.com> In-Reply-To: <20070517055003.GB1325@void.codelabs.ru> References: <20070517055003.GB1325@void.codelabs.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
This driver CAME from a 6.X base that is thoroughly tested here at Intel, so while I appreciate your efforts, they are unnecessary. When the time comes to MFC I will handle it. Regards, Jack On 5/16/07, Eygene Ryabinkin <rea-fbsd@codelabs.ru> wrote: > Jack, good day. > > I happened to make a quick and dirty patch for your latest (for the > 16.05.2007) em(4) driver from 7-CURRENT. I had seen that you mentioned > TSO and 6.3, so I assume that you're going to merge the driver to > the RELENG_6 someday, so maybe my effort may be helpful. > > To my problems. > > I have the '82540EM Gigabit Ethernet Controller' branded card > (PWLA8390MT) and I am currently expiriencing troubles with the > Gigabit switch (D-Link DGS-1008, the cheap one). Plugged into that > switch I have > > - broken packets and SSH messages 'Disconnecting: Corrupted MAC > on input.' when checksumming is turned on and gigabit speed, > > - abyssmal rates for the HTTP downloads (about 10Mbit/sec) when > checksums are turned off and the speed is gigabit again, > > - having switched the media on the adapter to the 100BaseTX > full-duplex, but still using the same switch the speed drops to > 200Kbit/sec, > > - using another D-Link switch (sorry, have no other brand in > hand) the above situation is completely reproducible. > > - working in the half-duplex mode (for 10BaseT/UTP and 100BaseTX) > I have no problems to reach the 90% of the theoretical bandwidth > of the link via HTTP either with checksums enabled or disabled. > > So, the full-duplex mode is not usable to me now. If someone can > help in this situation, I am all ears. > > I thought that new driver may introduce some fixes, but it isn't: > the situation is the same. I will continue my investigations, but > just in case you're interested in my port, it is available from > > http://codelabs.ru/patches/fbsd/em-6.5.0-initial.patch.bz2 > > RELENG_6 and 7-CURRENT sources were CVSupped yesterday, 16 May 2007. > TSO-related stuff is completely disabled for the RELENG_6. > > My limited testing of the driver revealed no problems yet, but if > they will arise I will report them. > -- > Eygene > _______________________________________________ > freebsd-net@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2a41acea0705170002i46d4356ar5579d0bb996f9f67>