Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 02 Sep 2000 00:24:35 +0200
From:      Poul-Henning Kamp <phk@freebsd.org>
To:        current@freebsd.org
Subject:   Currents PCI support hosed ?
Message-ID:  <32019.967847075@critter>

next in thread | raw e-mail | index | archive | help

If I boot this machine on a -current kernel, it doesn't find the
fxp#'s at all:

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD CC200008 #0: Mon Aug 28 16:30:18 GMT 2000
    root@stuff3.cybercity.dk:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 598063050 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (598.06-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR,XMM>
real memory  = 132907008 (129792K bytes)
avail memory = 125014016 (122084K bytes)
pnpbios: Bad PnP BIOS data checksum
Preloaded elf kernel "kernel.good" at 0xc0444000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82810E (i810E GMCH) Host To Hub bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel 82810E (i810E GMCH) Host To Hub bridge> at 0.0
pci0: <Intel 82810E (i810E GMCH) SVGA controller> at 1.0 irq 11
pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <unknown card> (vendor=0x1274, dev=0x1371) at 7.0 irq 11
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xde80-0xdebf mem 0xff500000-0xff5f
ffff,0xff8fe000-0xff8fefff irq 10 at device 9.0 on pci1
fxp0: Ethernet address 00:d0:b7:bd:f6:74
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xdf00-0xdf3f mem 0xff700000-0xff7f
ffff,0xff8ff000-0xff8fffff irq 9 at device 11.0 on pci1
fxp1: Ethernet address 00:d0:b7:be:10:2b
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 9 at device 3
1.2 on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 10
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ad0: 9768MB <ST310212A> [19846/16/63] at ata0-master using UDMA66
Mounting root from ufs:/dev/ad0s1a
ttt# 


--
Poul-Henning Kamp       | UNIX since Zilog Zeus 3.20
phk@FreeBSD.ORG         | TCP/IP since RFC 956
FreeBSD coreteam member | BSD since 4.3-tahoe
Never attribute to malice what can adequately be explained by incompetence.


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?32019.967847075>