Date: Thu, 04 Jun 1998 09:42:27 +0100 From: Mark Dawson <md@doc.ic.ac.uk> To: freebsd-hardware@FreeBSD.ORG Subject: PCI bus not probed Message-ID: <35765DF3.ABEC9C7A@doc.ic.ac.uk>
next in thread | raw e-mail | index | archive | help
FreeBSD-2.2.6 cannot see cards on one of the pci buses in a Compaq
ProLiant 1600R. I enclose the results of booting with -v . The upshot
is that three of the six PCI slots aren't available - this isn't a big
problem for me at the moment but I'd like to get everything in order
while I have the opportunity to do some testing before it goes into
service.
Many thanks,
Mark
p.s. When a chip isn't recognised why not display a URL saying how/where
to report the problem?
---
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 2.2.6-STABLE #0: Wed Jun 3 15:37:07 BST 1998
root@hex.doc.ic.ac.uk:/usr/src/sys/compile/HEX
Calibrating clock(s) ... i586 clock: 299521257 Hz, i8254 clock: 1193171
Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_I586_CALIBRATION not specified - using old calibration method
CPU: Pentium II (299.53-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x634 Stepping=4
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 335544320 (327680K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0021b000 - 0x13ffdfff, 333328384 bytes (81379 pages)
avail memory = 326590464 (318936K bytes)
eisa0: <CPQ553 (System Board)>
Probing for devices on the EISA bus
pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x00000000
pcibus_setup(1a): mode1res=0x80000000 (0x80000000)
pcibus_check: device 0 is there (id=00051166)
Probing for devices on PCI bus 0:
configuration mode 1 allows 32 devices.
chip0 <Ross (?) host to PCI bridge> rev 3 on pci0:0:0
vga0 <VGA-compatible display device> rev 34 int a irq ?? on pci0:6:0
mapreg[10] type=0 addr=b7000000 size=1000000.
ncr0 <ncr 53c875 fast20 wide scsi> rev 4 int a irq 5 on pci0:8:0
mapreg[10] type=1 addr=00006000 size=0100.
mapreg[14] type=0 addr=c6cfef00 size=0100.
mapreg[18] type=0 addr=c6cff000 size=1000.
reg20: virtual=0xf6df5f00 physical=0xc6cfef00 size=0x100
reg24: virtual=0xf6df6000 physical=0xc6cff000 size=0x1000
ncr0: minsync=12, maxsync=137, maxoffs=16, 128 dwords burst, large dma
fifo
ncr0: single-ended, open drain IRQ driver, using on-chip SRAM
ncr0: restart (scsi reset).
ncr0 scanning for targets 0..6 and 8..15 (V2 pl24 96/12/14)
ncr0 waiting for scsi devices to settle
chip1 <IBM 82351 PCI-PCI bridge> rev 7 on pci0:10:0
bridge from pci0 to pci1 through 1.
mapping regs: io:22807171 mem:c6e0c6e0 pmem:bff0b800
fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 4 int a irq 11 on
pci0:11:0
mapreg[10] type=0 addr=b6fff000 size=1000.
mapreg[14] type=1 addr=00006400 size=0020.
mapreg[18] type=0 addr=c6d00000 size=100000.
reg16: virtual=0xf6df7000 physical=0xb6fff000 size=0x1000
fxp0: Ethernet address 00:a0:c9:92:c8:d9
bpf: fxp0 attached
chip2 <generic PCI bridge (vendor=0e11 device=0001 subclass=2)> rev 7 on
pci0:15:0
chip3 <Ross (?) host to PCI bridge> rev 3 on pci0:17:0
pci0: uses 17834240 bytes of memory from b6fff000 upto c6efffff.
pci0: uses 288 bytes of I/O space from 6000 upto 7fff.
pci0: subordinate busses from 1 upto 1.
Probing for devices on PCI bus 1:
ida0 <Compaq SMART-2/P array controller> rev 3 int a irq 11 on pci1:0:0
mapreg[10] type=1 addr=00007000 size=0100.
[pci1 uses memory from c6e00000 to c6efffff]
mapreg[14] type=0 addr=c6efff00 size=0100.
[pci1 uses memory from c6e00000 to c6efffff]
mapreg[18] type=0 addr=b8000000 size=8000000.
reg20: virtual=0xf6df8f00 physical=0xc6efff00 size=0x100
using shared irq 11.
ida0: drvs=3 firm_rev=2.02
ida0: unit 0 (id0): <Compaq Logical Drive>
id0: 9000MB (18433440 total sec), 2259 cyl, 255 head, 32 sec, bytes/sec
512
ida0: unit 1 (id1): <Compaq Logical Drive>
id1: 47852MB (98001600 total sec), 12010 cyl, 255 head, 32 sec,
bytes/sec 512
ida0: unit 2 (id2): <Compaq Logical Drive>
id2: 47338MB (96948960 total sec), 11881 cyl, 255 head, 32 sec,
bytes/sec 512
pci1: uses 134217984 bytes of memory from b8000000 upto c6efffff.
pci1: uses 256 bytes of I/O space from 7000 upto 70ff.
Probing for devices on PCI bus 2:
pci2:7: Compaq, device=0xae43, class=network (misc) int a irq 9 [no
driver assigned]
map(10): io(8400)
map(14): mem32(c6ffeef0)
ncr1 <ncr 53c875 fast20 wide scsi> rev 4 int a irq 10 on pci2:9:0
mapreg[10] type=1 addr=00008000 size=0100.
mapreg[14] type=0 addr=c6ffef00 size=0100.
mapreg[18] type=0 addr=c6fff000 size=1000.
reg20: virtual=0xf6df9f00 physical=0xc6ffef00 size=0x100
reg24: virtual=0xf6dfa000 physical=0xc6fff000 size=0x1000
ncr1: minsync=12, maxsync=137, maxoffs=16, 128 dwords burst, large dma
fifo
ncr1: single-ended, open drain IRQ driver, using on-chip SRAM
ncr1: restart (scsi reset).
ncr1 scanning for targets 0..6 and 8..15 (V2 pl24 96/12/14)
ncr1 waiting for scsi devices to settle
pci2: uses 4352 bytes of memory from c6ffef00 upto c6ffffff.
pci2: uses 256 bytes of I/O space from 8000 upto 80ff.
Probing for devices on PCI bus 3:
Probing for devices on the ISA bus:
sc0: the current keyboard controller command byte 0065
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
kbdio: RESET_KBD return code:00fa
kbdio: RESET_KBD status:00aa
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: BIOS video mode:3
sc0: VGA registers upon power-up
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: video mode:24
sc0: VGA registers in BIOS for mode:24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: VGA registers to be used for mode:24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: rows_offset:1
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x3bc-0x3c3 irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
bpf: lp0 attached
psm0: disabled, not probed.
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
ida0 not found
stub0 not found at 0x1f0
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
imasks: bio c0080c60, tty c007089a, net c007089a
BIOS Geometries:
0:03fffe20 0..1023=1024 cylinders, 0..254=255 heads, 1..32=32 sectors
1:03fffe20 0..1023=1024 cylinders, 0..254=255 heads, 1..32=32 sectors
2:03fffe20 0..1023=1024 cylinders, 0..254=255 heads, 1..32=32 sectors
0 accounted for
Device configuration finished.
bpf: tun0 attached
bpf: sl0 attached
bpf: lo0 attached
Considering FFS root f/s.
id0s1: type 0xa5, start 73440, end = 18433439, size 18360000 : OK
id0s3: type 0x12, start 32, end = 73439, size 73408 : OK
id1s1: type 0xa5, start 32, end = 98001599, size 98001568 : OK
id2s1: type 0xa5, start 32, end = 96948959, size 96948928 : OK
id2s1: type 0xa5, start 32, end = 96948959, size 96948928 : OK
id1s1: type 0xa5, start 32, end = 98001599, size 98001568 : OK
id1s1: type 0xa5, start 32, end = 98001599, size 98001568 : OK
id2s1: type 0xa5, start 32, end = 96948959, size 96948928 : OK
id2s1: type 0xa5, start 32, end = 96948959, size 96948928 : OK
id1s1: type 0xa5, start 32, end = 98001599, size 98001568 : OK
id2s1: type 0xa5, start 32, end = 96948959, size 96948928 : OK
id1s1: type 0xa5, start 32, end = 98001599, size 98001568 : OK
id1s1: type 0xa5, start 32, end = 98001599, size 98001568 : OK
id2s1: type 0xa5, start 32, end = 96948959, size 96948928 : OK
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?35765DF3.ABEC9C7A>