Date: Sun, 20 Sep 2009 03:42:56 -0700 (PDT) From: paradox <ddkprog@yahoo.com> To: ianf@clue.co.za Cc: current@freebsd.org Subject: Re: bwi(4) BCM4315 support? Message-ID: <361252.12201.qm@web59102.mail.re1.yahoo.com> In-Reply-To: <4AB604FC.2080602@lissyara.su>
next in thread | previous in thread | raw e-mail | index | archive | help
> from: Ian Freislich <ianf@clue.co.za> > to: current@freebsd.org >=20 > Hi >=20 > I have the following card: >=20 > bwi0@pci0:1:0:0:=A0 =A0 =A0 =A0 class=3D0x028000 > card=3D0x1508103c chip=3D0x431514e4 rev=3D0x01 hdr=3D0x00 > =A0 =A0 vendor=A0 =A0=A0=A0=3D 'Broadcom > Corporation' > =A0 =A0 device=A0 =A0=A0=A0=3D 'Broadcom > Wireless b/g (BCM4315/BCM22062000)' > =A0 =A0 class=A0 =A0 =A0 =3D network >=20 > By playing a little bit with the if_bwi source, I've > managed to get > it detected to this point, but I obviously don't know what > I'm > doing: >=20 > bwi0: <Broadcom BCM4315 802.11b/g Wireless Lan> mem > 0xfeafc000-0xfeafffff irq 16 at device 0.0 on pci1 > bwi0: [ITHREAD] > bwi0: BBP: id 0x4312, rev 0x1, pkg 0 > bwi0: MAC: rev 15 > bwi0: PHY: type 5, rev 1, ver 6 Type 5 is LP phy chip which is not supported > bwi0: RF: manu 0x17f, type 0x0002, rev 0 > bwi0: only BCM2050 RF is supported for 11G PHY > device_attach: bwi0 attach returned 6 >=20 > Is there any thing I can try?=A0 Is there support on the > horizon or > should I try and replace it with a supported card? >=20 > Ian >=20 > -- > Ian Freislich bwi not work with 0x4315=20 because it is a new type of device=20 use the ndis driver=0A=0A=0A
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?361252.12201.qm>