Date: Wed, 28 Apr 1999 21:03:36 -0400 From: Jim Bloom <bloom@acm.org> To: Rick Whitesel <rwhitesel@nbase-xyplex.com> Cc: erik@habatech.no, freebsd-current@FreeBSD.ORG Subject: Re: Problems with ahc (2940U2W) and USB Message-ID: <3727AFE8.168D7178@acm.org> References: <XFMail.990428173844.erik@habatech.no> <002f01be9190$2e22bfe0$d3e4b38c@xyplex.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Add me to the list of people seeing this problem. I have an ASUS P2B-S with onboard Adaptec 7890. I have been seeing the problem on and off since December of last year. One time it boots and the next time it doesn't. Once the disk is hung, the reset switch or power cycling are the only ways to unfreeze it. I have seen this problem mentioned on both freebsd-current and freebsd-scsi several times without a solution. I don't recall a link to USB being mentioned before. I'll try to post my dmesg output later this tonight. Jim Bloom bloom@acm.org Rick Whitesel wrote: > > Hi: > I am seeing the same thing on a ASUS P2B with a Adaptec 2940?? > controller. > > Rick > > ----- Original Message ----- > From: <erik@habatech.no> > To: <freebsd-current@FreeBSD.ORG> > Sent: Wednesday, April 28, 1999 11:38 AM > Subject: Problems with ahc (2940U2W) and USB > > With the current sources, there seems to be a problem with the Adaptec > 2940U2W driver when using USB. > > Whenever I try to boot a kernel with the USB driver, the boot process > gets to the "Waiting 15 seconds for SCSI devices to settle" and stops. > If I compile a kernel with an nearly identical config, only the USB > driver has been commented out, it boots all right. > > My computer has a Spacewalker 661 mainboard, which is a 440BX based card. > The SCSI controller is an Adaptec 2940U2W. > > Kernels compiled before the integration of new-bus works fine. > > Now, this is not a critical situation for me, as I have no USB devices, > but I thought someone else would want this information. > > Anyone else experiencing this? > > -- > --------------------------------+---------------------------------------+ > Erik H. Bakke, Habatech AS | To be or not to be... | > E-Mail: erik@habatech.no | Is simply a question of binary logic. | > This message was sent by XFMail | | > --------------------------------+---------------------------------------+ > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-current" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-current" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3727AFE8.168D7178>