Date: Mon, 17 Jan 2000 15:37:23 -0700 From: Adam Serediuk <vipw@home.com> To: freebsd-multimedia@FreeBSD.ORG Subject: SB AWE64 GOLD in FreeBSD 3.3-RELESAE producing a lot of static Message-ID: <388399A3.B866EC5D@home.com>
next in thread | raw e-mail | index | archive | help
--------------C6BD9EA3663E1668728D729E Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, at the risk of sounding like a moron I decided to post this. I'm using a Sound Blaster 64 Gold in FreeBSD 3.3-RELESAE and I have noticed a lot of static being produced. In other operating systems(i.e. Windows NT) there is no static. I am using the snd0 driver and have the following in my kernel for the sound card controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device opl0 at isa? port 0x388 device awe0 at isa? port 0x620 I am also using the /boot/kernel.conf to setup the PNP stuffs. At the advice of a friend I upgraded to -CURRENT and tried the pcm0 driver out, I had some progress here. There was not near as much static as there was in 3.3-RELEASE with the snd0 driver. In 3.3-RELEASE the pcm0 driver performs the same as the snd0 driver with mad static. I had to downgrade back to -RELEASE because some things would not work properly for me in -CURRENT. Any information would be greatly appreciated. I hope I didn't come off as a total moron. Thanks in advance, -- Adam Serediuk vipw@home.com --------------C6BD9EA3663E1668728D729E Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit <!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> Hi, at the risk of sounding like a moron I decided to post this. <p>I'm using a Sound Blaster 64 Gold in FreeBSD 3.3-RELESAE and I have noticed a lot of static being produced. In other operating systems(i.e. Windows NT) there is no static. I am using the snd0 driver and have the following in my kernel for the sound card <p>controller snd0 <br>device sb0 at isa? port 0x220 irq 5 drq 1 <br>device sbxvi0 at isa? drq 5 <br>device sbmidi0 at isa? port 0x330 <br>device opl0 at isa? port 0x388 <br>device awe0 at isa? port 0x620 <p>I am also using the /boot/kernel.conf to setup the PNP stuffs. <br>At the advice of a friend I upgraded to -CURRENT and tried the pcm0 driver out, I had some progress here. There was not near as much static as there was in 3.3-RELEASE with the snd0 driver. In 3.3-RELEASE the pcm0 driver performs the same as the snd0 driver with mad static. I had to downgrade back to -RELEASE because some things would not work properly for me in -CURRENT. <br>Any information would be greatly appreciated. I hope I didn't come off as a total moron. <p>Thanks in advance, <pre>-- Adam Serediuk vipw@home.com</pre> </html> --------------C6BD9EA3663E1668728D729E-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?388399A3.B866EC5D>