Date: Wed, 16 Feb 2000 11:19:40 -0800 From: Tony Rini - Network Operations <tony@thegrid.net> To: questions@freebsd.org Subject: Cable and DSL Routing Message-ID: <38AAF84C.EB4AEFC9@thegrid.net>
index | next in thread | raw e-mail
I'm in the lucky position to live in an area serviced by both Cable
Modems and DSL. Before I start ordering circuits though, I'd like to
work out the logistics of combining both via a fbsd router.
DSL --\
|---- FBSD---Hub--My Internal Lan
Cable-/
I have never set up something like this before and am basing comments on
theory. I assume I'll need to have 3 NICs in the fbsd box. I'll have to
set up networks on all 3. Ok simple enough so far. What I haven't
figured out yet is how routed is going to route between these 3
networks. I'm barely familiar with Cisco IOS but I know its fairly
straight forward (well, .. as straight forward as cisco gets) to set up
dynamic routing to solve the problem. Does routed have provisions for
this kind of routing (I'd probably run the least hop routing). Is there
a replacement for routed that supports more robust routing protocols
(EIGRP, etc.)?
I'd be very interested in hearing success (or horror?) stories on the
matter.
TIA
--
Tony Rini tony@thegrid.net
Network Operations Direct 805-503-7569
The Grid, Inc. www.thegrid.net
-------------------------------------------------
A OneMain.com Company
-------------------------------------------------
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38AAF84C.EB4AEFC9>