Date: Mon, 24 Jul 2000 12:50:26 +0100 From: "Roberto Nunnari, AGIE" <roberto.Nunnari@agie.ch> To: Udo Schweigert <ust@cert.siemens.de> Cc: isdn@freebsd.org Subject: Re: AVM Fritz!Card pnp Message-ID: <397C2D82.76A4F9DC@agie.ch> References: <390EB6D8.1089A80A@agie.ch> <20000502122511.A66256@alaska.cert.siemens.de> <390EBD65.2EBDDEFA@agie.ch> <20000502124235.A66656@alaska.cert.siemens.de> <392CF53E.DE8CC0B4@agie.ch> <20000525112228.A53021@alaska.cert.siemens.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Udo.
It took me some time but finally I made up my mind
and went on installing the development version you
sent to me...
Installation went quite smooth (I just had to modify
a Makefile in ispppcontrol adding a CFLAGS+=-I..)
I built a new kernel and installed it. At boot time
my ISDN card is recognized and all drivers are
successfully attached.
I went on and custumized /etc/isdn/isdnd.rc
Now I need to tell my system to use my isdn
card instead of the modem attached on /dev/cuaa1
What should I modify /etc/ppp/ppp.conf?
Surely 'set device = /dev/cuaa1' must be changed
to something else... What should that "else" be???
Also, my isp uses both B1 and B2 channels. How
should I set it up so that I can use them both?
Once things are up and working, how's isdnd supposed
to be started?
Best regards.
Udo Schweigert wrote:
>
> On Thu, May 25, 2000 at 10:41:18 +0100, Roberto Nunnari, AGIE wrote:
> > Hi Udo.
> >
> > I took a look at the isdn4bsd version I have on my FreeBSD
> > 4.0-release. It seems to be 0.83. Following the link you
> > gave to me I see that the latest version is 0.90.
> > So I took a look at the cards file in 0.90 and found out
> > that support for my card is not even in that version?
> >
> > If a new release of isdn4bsd with support for my card is not
> > expected in a short time, I'd be grateful if you could send the
> > driver for my card to me (I'm a brave guy ;^) ...I know...).
> I hope so! -----------------^^^^^^^^^^^^^^^^
>
> Attached you find the latest developer version. Follow the instructions in
> FreeBSD/INSTALLATION. Make sure that "device ifpnp" is in your kernel-config.
>
> A report on successful operation of this driver is highly recommended together
> with some numbers on usage-duration, etc ;-)
>
> Regards.
> --
> Udo Schweigert, Siemens AG | Voice : +49 89 636 42170
> ZT IK 3, Siemens CERT | Fax : +49 89 636 41166
> D-81730 Muenchen / Germany | email : ust@cert.siemens.de
> PGP-2/5 fingerprint | D8 A5 DF 34 EC 87 E8 C6 E2 26 C4 D0 EE 80 36 B2
>
> ------------------------------------------------------------------------
> Name: i4b-00.90.29-dev-050500.tar.gz
> i4b-00.90.29-dev-050500.tar.gz Type: Unix Tape Archive (application/x-tar)
> Encoding: base64
--
Roberto Nunnari -software engineer-
mailto:roberto.nunnari@agie.ch
AGIE - http://www.agie.com
Via dei pioppi 16 tel: +41-91-8069138
6616 Losone """
Switzerland (o o)
=======================oOO==(_)==OOo========================
MY OPNIONS ARE NOT NECESSARELY THOSE OF MY EMPLOYER
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?397C2D82.76A4F9DC>