Date: Tue, 08 Aug 2000 08:44:08 -0700 From: Joseph Scott <joseph.scott@owp.csus.edu> To: Julian Elischer <julian@elischer.org> Cc: Alan Clegg <abc@bsdi.com>, Andrzej Bialecki <abial@webgiro.com>, Cameron Grant <gandalf@vilnya.demon.co.uk>, freebsd-hackers@FreeBSD.ORG Subject: Re: US$100 prize for adding ESS Audiodrive support to pcm Message-ID: <39902AC7.CB39BCD8@owp.csus.edu> References: <004501bffb0b$27bf8c60$0504020a@haveblue> <Pine.BSF.4.20.0008052142580.52409-100000@mx.webgiro.com> <20000805155806.A94702@diskfarm.firehouse.net> <398F3081.167EB0E7@elischer.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Julian Elischer wrote: > > Alan Clegg wrote: > > > > On a simmilar note: what about a driver for ESS Maestro 2E? I'm certainly > [...] > > Add $100 from me. There is one that works for some folks out there > > by <taku@cent.saitama-u.ac.jp>, but it does not work for me. > > where do you find this? I'm not sure about Alan, but I got it from an email from Taku YAMAMOTO <taku@cent.saitama-u.ac.jp>. I've included the email below. One thing to note, myself and a few others have only been able to get sound to work out of the audio out jack. For some reason the internal speakers just don't work. I've played with the settings on the notebook quite a bit, and they do still work when I boot into Windows. However, sound, even without the internal speakers, is better than no sound at all :-) --- I've written up Maestro driver (beta, mixer and playback). Please test it. But this is beta quality and may have lots of problems. Beware! To install: 0. Get driver source tarball from: http://access.cent.saitama-u.ac.jp/~taku/freebsd/maestro/releng4-20000725.tar.gz 1. Check MD5 checksum if you want. MD5 (releng4-20000725.tar.gz) = b42179b09016d2cf77055ae559395a67 2. If your kernel doesn't have device pcm, add following line to your config and recompile: device pcm 3. Untar the archive. 4. cd to maestro, make and make install. If you get errors, unter the archive under sys/modules and retry. 5. Your card is not a Maestro-2E, you can kldload maestro without reboot. Otherwise, add following to /boot/loader.conf and reboot: maestro_load="YES" 6. Enjoy. 7. When you find problems, please mail to me :) The driver can also be statically linked to your kernel. Just FYI. Good luck. --- -- Joseph Scott joseph.scott@owp.csus.edu Office Of Water Programs - CSU Sacramento To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39902AC7.CB39BCD8>