Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 06 Dec 2000 17:33:01 -0800
From:      Dennis Glatting <dennis.glatting@software-munitions.com>
To:        stable@freebsd.org
Subject:   disk problem under RELENG_4
Message-ID:  <3A2EE8CD.18E817BB@software-munitions.com>

next in thread | raw e-mail | index | archive | help

It could be my hardware but this problem started shortly after I
cvsupd against RELENG_4 a few weeks ago. I re-cvsupd a few days ago
but the problem persists. It could be my hardware, but FYI.

dmesg output follows error.




Dec  6 17:12:54 btw /kernel: (da1:ahc0:0:1:0): SCB 0xf - timed out in
Message-in phase,
SEQADDR == 0x10f
Dec  6 17:12:58 btw /kernel: STACK == 0xdd, 0x5c, 0x15e, 0x174
Dec  6 17:12:58 btw /kernel: SXFRCTL0 == 0x80
Dec  6 17:12:58 btw /kernel: SCB count = 255
Dec  6 17:12:58 btw /kernel: QINFIFO entries: 22 80 68 7 104 69 65 99
21 55 27 92 17 1 18
39 95 8 97 36 46 54 100 31 98 59 23 84 4 41 28 26 94 44 10 3 0 5 102
81 83 20 19 63 13 101
2 9 29 91 37 64 108 14 25 6 109 67 66 49 57 119 30 52 48 106 16
Dec  6 17:12:58 btw /kernel: Waiting Queue entries:
Dec  6 17:12:58 btw /kernel: Disconnected Queue entries:
Dec  6 17:12:58 btw /kernel: QOUTFIFO entries:
Dec  6 17:12:58 btw /kernel: Sequencer Free SCB List: 21 30 5 12 11 2
4 28 3 1 29 14 9 19 8
18 23 27 25 16 22 10 31 24 20 17 15 6 26 7 13
Dec  6 17:12:58 btw /kernel: Pending list: 16 106 48 52 30 119 57 49
66 67 109 6 25 14 108
64 37 91 29 9 2 101 13 63 19 20 83 81 102 5 0 3 10 44 94 26 28 41 4 84
23 59 98 31 100 54
46 36 97 8 95 39 18 1 17 92 27 55 21 99 65 69 104 7 68 80 22 15
Dec  6 17:12:58 btw /kernel: Kernel Free SCB list: 12 33 42 93 96 85
43 11 90 107 24 105 50
34 82 51 45 103 58 47 35 32 86 53 250 251 252 253 254 240 241 242 243
244 245 246 247 248
249 230 231 232 233 234 235 236 237 238 239 220 221 222 223 224 225
226 227 228 229 210 211
212 213 214 215 216 217 218 219 200 201 202 203 204 205 206 207 208
209 190 191 192 193 194
195 196 197 198 199 180 181 182 183 184 185 186 187 188 189 170 171
172 173 174 175 176 177
178 179 160 161 162 163 164 165 166 167 168 169 150 151 152 153 154
155 156 157 158 159 140
141 142 143 144 145 146 147 148 149 130 131 132 133 134 135 136 137
138 139 120 121 122 123
124 125 126 127 128 129 110 111 112 113 114 115 116 117 118 56 40 62
61 60 79 78 77 76 75
74 73 72 71 70 89 88 87
Dec  6 17:12:58 btw /kernel: sg[0] - Addr 0x8115000 : Length 4096
Dec  6 17:12:58 btw /kernel: sg[1] - Addr 0x68f6000 : Length 4096
Dec  6 17:12:58 btw /kernel: (da1:ahc0:0:1:0): BDR message in message
buffer
Dec  6 17:12:58 btw /kernel: (da1:ahc0:0:1:0): SCB 0xf - timed out in
Message-in phase,
SEQADDR == 0x169
Dec  6 17:12:58 btw /kernel: STACK == 0x5c, 0x15e, 0x174, 0x2e
Dec  6 17:12:58 btw /kernel: SXFRCTL0 == 0x80
Dec  6 17:12:58 btw /kernel: SCB count = 255
Dec  6 17:12:58 btw /kernel: QINFIFO entries: 22 80 68 7 104 69 65 99
21 55 27 92 17 1 18
39 95 8 97 36 46 54 100 31 98 59 23 84 4 41 28 26 94 44 10 3 0 5 102
81 83 20 19 63 13 101
2 9 29 91 37 64 108 14 25 6 109 67 66 49 57 119 30 52 48 106 16
Dec  6 17:12:58 btw /kernel: Waiting Queue entries:
Dec  6 17:12:59 btw /kernel: Disconnected Queue entries:
Dec  6 17:12:59 btw /kernel: QOUTFIFO entries:
Dec  6 17:12:59 btw /kernel: Sequencer Free SCB List: 21 30 5 12 11 2
4 28 3 1 29 14 9 19 8
18 23 27 25 16 22 10 31 24 20 17 15 6 26 7 13
Dec  6 17:12:59 btw /kernel: Pending list: 16 106 48 52 30 119 57 49
66 67 109 6 25 14 108
64 37 91 29 9 2 101 13 63 19 20 83 81 102 5 0 3 10 44 94 26 28 41 4 84
23 59 98 31 100 54
46 36 97 8 95 39 18 1 17 92 27 55 21 99 65 69 104 7 68 80 22 15
Dec  6 17:12:59 btw /kernel: Kernel Free SCB list: 12 33 42 93 96 85
43 11 90 107 24 105 50
34 82 51 45 103 58 47 35 32 86 53 250 251 252 253 254 240 241 242 243
244 245 246 247 248
249 230 231 232 233 234 235 236 237 238 239 220 221 222 223 224 225
226 227 228 229 210 211
212 213 214 215 216 217 218 219 200 201 202 203 204 205 206 207 208
209 190 191 192 193 194
195 196 197 198 199 180 181 182 183 184 185 186 187 188 189 170 171
172 173 174 175 176 177
178 179 160 161 162 163 164 165 166 167 168 169 150 151 152 153 154
155 156 157 158 159 140
141 142 143 144 145 146 147 148 149 130 131 132 133 134 135 136 137
138 139 120 121 122 123
124 125 126 127 128 129 110 111 112 113 114 115 116 117 118 56 40 62
61 60 79 78 77 76 75
74 73 72 71 70 89 88 87
Dec  6 17:12:59 btw /kernel: sg[0] - Addr 0x8115000 : Length 4096
Dec  6 17:12:59 btw /kernel: sg[1] - Addr 0x68f6000 : Length 4096
Dec  6 17:12:59 btw /kernel: (da1:ahc0:0:1:0): no longer in timeout,
status = 34b
Dec  6 17:12:59 btw /kernel: ahc0: Issued Channel A Bus Reset. 68 SCBs
aborted







Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
        The Regents of the University of California. All rights
reserved.
FreeBSD 4.2-STABLE #22: Fri Dec  1 23:47:14 PST 2000
    root@btw:/usr/src/sys/compile/BTW
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (448.06-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2

Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 268435456 (262144K bytes)
avail memory = 256126976 (250124K bytes)
Preloaded elf kernel "kernel" at 0xc044b000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G200 AGP graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> at device 7.1 on pci0
atapci0: Busmastering DMA not supported
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1ca0-0x1cbf
irq 9 at device 7.2 on
pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x7000-0x700f
at device 7.3 on pci0
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0x1cc0-0x1cff irq 11 at
device 13.0 on pci0
xl0: Ethernet address: 00:60:08:b0:3d:a6
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0x1000-0x10ff mem
0xf4000000-0xf4000fff
irq 10 at device 14.0 on pci0
aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0x1400-0x14ff mem
0xf4001000-0xf4001fff
irq 15 at device 14.1 on pci0
aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs
xl1: <3Com 3c905B-TX Fast Etherlink XL> port 0x1c00-0x1c7f mem
0xf4003000-0xf400307f irq 15
at device 15.0 on pci0
xl1: Ethernet address: 00:50:04:d2:9f:c6
miibus1: <MII bus> on xl1
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc2: <Adaptec 2940 Ultra SCSI adapter> port 0x1800-0x18ff mem
0xf4002000-0xf4002fff irq 9
at device 16.0 on pci0
aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to
deny, logging limited to 512 packets/entry by default
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.8 initialized.  Default = pass all, Logging = enabled
Waiting 2 seconds for SCSI devices to settle
sa0 at ahc2 bus 0 target 4 lun 0
sa0: <ARCHIVE ANCDA 2750 28077 -003> Removable Sequential Access
SCSI-CCS device 
sa0: 3.300MB/s transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS 10K 9WLS UCH0> Fixed Direct Access SCSI-3 device 
da0: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged
Queueing Enabled
da0: 8759MB (17938986 512 byte sectors: 255H 63S/T 1116C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM ATLAS 10K 9WLS UC81> Fixed Direct Access SCSI-3 device 
da1: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged
Queueing Enabled
da1: 8759MB (17938986 512 byte sectors: 255H 63S/T 1116C)
da2 at ahc1 bus 0 target 12 lun 0
da2: <SEAGATE ST410800W 4508> Fixed Direct Access SCSI-2 device 
da2: 20.000MB/s transfers (10.000MHz, offset 15, 16bit), Tagged
Queueing Enabled
da2: 8669MB (17755614 512 byte sectors: 255H 63S/T 1105C)
Mounting root from ufs:/dev/da0s1a
da4 at ahc2 bus 0 target 2 lun 0
da4: <SEAGATE ST43400N 1022> Fixed Direct Access SCSI-2 device 
da4: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing
Enabled
da4: 2777MB (5688447 512 byte sectors: 255H 63S/T 354C)
da3 at ahc2 bus 0 target 1 lun 0
da3: <SEAGATE ST43400N 1028> Fixed Direct Access SCSI-2 device 
da3: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing
Enabled
da3: 2777MB (5688447 512 byte sectors: 255H 63S/T 354C)
vinum: loaded
vinum: reading configuration from /dev/da4s1e
vinum: updating configuration from /dev/da3s1e
xl0: promiscuous mode enabled
cd0 at ahc2 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:464 1.05> Removable CD-ROM SCSI-2 device 
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not
present


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A2EE8CD.18E817BB>