Date: Wed, 11 Apr 2001 17:25:23 -0400 From: Jeremy Hopkins <jhopkins@rtci.com> To: freebsd-stable@freebsd.org Subject: Problems with 3c905B and 4.3-RC Message-ID: <3AD4CBC3.F3E79AFC@rtci.com>
next in thread | raw e-mail | index | archive | help
I have just installed a FreeBSD 4.1.1-RELEASE box. I had to start there
as my 3c905B card did not show in an ifconfig -a using newer floppies so
I reverted to 4.1.1 I got the box up and running and did a cvsup to
4.3-RC, made/installed world and kernel just fine. However I notice I
have no network interface at xl0 like I did before the reboot into
4.3-RC.
xl0 shows up in dmesg but I get error messages along with it.
xl0: <3Com 3c905B-TX Fast Etherlink XL> irq 10 at device 15.0 on pci0
xl0: couldn't map ports/memory
device_probe_and_attach: xl0 attach returned 6
I had also had the same error messages about my sound card pcm0. I have
removed the sound card to eliminate the possibility these are
conflicting, and the dmesg below is without the sound card in the
system. It appears there was some talk about this back in Sept. 2000 in
the -current list, but I can't seem to find a resolution on it.
Thanks in advance,
Jeremy
--
Jeremy Hopkins
Systems Administrator
www.icc.net www.rtci.com
For those who like this sort of thing, this is the sort of thing they
like. -- Abraham Lincoln
below is copy of full dmesg output-
------------------------------
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.3-RC #0: Wed Apr 11 18:50:15 GMT 2001
root@shadow.ghettoweb.net:/usr/obj/usr/src/sys/GUNSHOT
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (497.84-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134217728 (131072K bytes)
avail memory = 126545920 (123580K bytes)
Preloaded elf kernel "kernel" at 0xc03e1000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1000-0x100f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1020-0x103f irq
9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x7000-0x700f at
device 7.3 on pci0
xl0: <3Com 3c905B-TX Fast Etherlink XL> irq 10 at device 15.0 on pci0
xl0: couldn't map ports/memory
device_probe_and_attach: xl0 attach returned 6
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IPsec: Initialized Security Association Processing.
ad0: 9787MB <WDC WD102AA> [19885/16/63] at ata0-master UDMA33
ad1: 9787MB <WDC WD102AA> [19885/16/63] at ata0-slave UDMA33
acd0: CDROM <CRD-8483B> at ata1-master using PIO4
afd0: 96MB <IOMEGA ZIP 100 ATAPI> [96/64/32] at ata1-slave using PIO3
Mounting root from ufs:/dev/ad0s1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3AD4CBC3.F3E79AFC>