Date: Mon, 15 Oct 2001 19:39:20 +0930 From: Mike Gratton <mike@vee.net> To: Warner Losh <imp@harmony.village.org> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: "wi0: watchdog timout" on 4.4-R Message-ID: <3BCAB5D0.4000005@vee.net> References: <3BC97369.7050705@vee.net> <200110150302.f9F32e716208@harmony.village.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------000201040201050506030801 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Hey Warner, Warner Losh wrote: > In message <3BC97369.7050705@vee.net> Mike Gratton writes: > : I'm having trouble getting a Elan <http://www.pccard.co.uk/>; PCI to > : PCMCIA adapter working with a Lucent WaveLAN card on a stock, desktop > : installation of 4.4-R. > > please send a dmesg, booted verbose. > It is attached. Le me know if you need any more detail. Interestingly, when I was trying to get this working, I kept the WaveLAN card in the slot between reboots. The card was recognised as being inserted by the pccard (pcic?) driver and hence pccardd also recognised it when it was started. Now, when getting this dmesg for you, I though it might be clearer if I kept the pcic/pccard driver output separate from when the card was inserted, so I inserted the card after booting. But the card wasn't picked up, it was only after I did a `pccardc power 0 1` that it was recognised. Let me know if you want a dmesg with the card in at boot time. Thanks, Mike. -- Mike Gratton <mike@vee.net> I want you to know, he's not coming back. Blatant self-promotion: <http://web.vee.net/>; --------------000201040201050506030801 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.txt" Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-RELEASE #2: Sun Oct 14 17:40:02 CST 2001 root@:/usr/src/sys/compile/CONSOLIDATION Calibrating clock(s) ... TSC clock: 908042658 Hz, i8254 clock: 1193126 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: AMD Athlon(tm) Processor (908.09-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!> Data TLB: 24 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 268353536 (262064K bytes) Physical memory chunk(s): 0x00001000 - 0x0009dfff, 643072 bytes (157 pages) 0x003ab000 - 0x0ffe3fff, 264474624 bytes (64569 pages) config> q avail memory = 257728512 (251688K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f92a0 bios32: Entry = 0xf0e10 (c00f0e10) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x1010 pnpbios: Found PnP BIOS data at 0xc00fc2b0 pnpbios: Entry = f0000:c2e0 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: ACPI: 000f6640 Preloaded elf kernel "kernel" at 0xc0385000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03850a8. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106) Using $PIR table, 9 entries at 0xc00f15e0 pcib-: pcib0 exists, using next available unit number npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x1106, dev=0x0305, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e4000000, size 26 found-> vendor=0x1106, dev=0x8305, revid=0x00 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x1106, dev=0x0686, revid=0x22 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1106, dev=0x0571, revid=0x10 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000d800, size 4 found-> vendor=0x1106, dev=0x3038, revid=0x10 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=5 map[20]: type 1, range 32, base 0000d400, size 5 found-> vendor=0x1106, dev=0x3038, revid=0x10 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=5 map[20]: type 1, range 32, base 0000d000, size 5 found-> vendor=0x1106, dev=0x3057, revid=0x30 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x104c, dev=0xac50, revid=0x01 class=06-07-00, hdrtype=0x02, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=255 found-> vendor=0x1102, dev=0x0002, revid=0x08 class=04-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=255 found-> vendor=0x1102, dev=0x7002, revid=0x08 class=09-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x1229, revid=0x08 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base d5800000, size 12 map[14]: type 1, range 32, base 00009800, size 6 map[18]: type 1, range 32, base d5000000, size 20 found-> vendor=0x105a, dev=0x0d30, revid=0x02 class=01-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base 00009400, size 3 map[14]: type 1, range 32, base 00009000, size 2 map[18]: type 1, range 32, base 00008800, size 3 map[1c]: type 1, range 32, base 00008400, size 2 map[20]: type 1, range 32, base 00008000, size 6 map[24]: type 1, range 32, base d4800000, size 17 pci0: <PCI bus> on pcib0 pcib2: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0 found-> vendor=0x10de, dev=0x0150, revid=0xa3 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base d6000000, size 24 map[14]: type 1, range 32, base d8000000, size 27 pci1: <PCI bus> on pcib2 pci1: <NVidia GeForce2 GTS graphics accelerator> (vendor=0x10de, dev=0x0150) at 0.0 irq 11 isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd800 ata0: mask=03 status0=50 status1=00 ata0: mask=03 ostat0=50 ostat2=00 ata0-slave: ATAPI probe a=00 b=00 ata0-master: ATAPI probe a=14 b=eb ata0: mask=03 status0=00 status1=00 ata0: devices=04 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd808 ata1: mask=03 status0=40 status1=40 ata1: mask=03 ostat0=40 ostat2=40 ata1-master: ATAPI probe a=40 b=40 ata1-slave: ATAPI probe a=40 b=40 ata1: mask=03 status0=40 status1=40 ata1-master: ATA probe a=a5 b=a5 ata1-slave: ATA probe a=a5 b=a5 ata1: devices=03 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device 4.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Mitsumi Electric Hub in Apple USB Keyboard, class 9/0, rev 1.10/2.11, addr 2 uhub1: 3 ports with 2 removable, bus powered ukbd0: Mitsumi Electric Apple USB Keyboard, rev 1.00/1.03, addr 3, iclass 3/1 kbd0 at ukbd0 kbd0: ukbd0, generic (0), config:0x0, flags:0x1d0000 ums0: Logitech USB Mouse, rev 1.10/6.b4, addr 4, iclass 3/1 ums0: 3 buttons and Z dir. uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device 4.3 on pci0 using shared irq5. usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2 uhub3: 4 ports with 4 removable, self powered pci_cfgintr_virgin: using routable interrupt 3 pci_cfgintr: 0:9 INTA routed to irq 3 pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 3 at device 9.0 on pci0 pcic0: PCI Memory allocated: 0x44000000 pcic0: TI12XX PCI Config Reg: [pwr save][pci only] pccard0: <PC Card bus (classic)> on pcic0 pci0: <unknown card> (vendor=0x1102, dev=0x0002) at 10.0 pci0: <unknown card> (vendor=0x1102, dev=0x7002) at 10.1 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x9800-0x983f mem 0xd5000000-0xd50fffff,0xd5800000-0xd5800fff irq 5 at device 13.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:02:b3:07:93:cc fxp0: PCI IDs: 8086 1229 8086 000c 0008 fxp0: Chip Type: 0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached atapci1: <Promise ATA100 controller> port 0x8000-0x803f,0x8400-0x8403,0x8800-0x8807,0x9000-0x9003,0x9400-0x9407 mem 0xd4800000-0xd481ffff irq 10 at device 17.0 on pci0 ata-: ata2 exists, using next available unit number ata2: iobase=0x9400 altiobase=0x9002 bmaddr=0x8000 ata2: mask=03 status0=50 status1=00 ata2: mask=03 ostat0=50 ostat2=00 ata2-master: ATAPI probe a=00 b=00 ata2-slave: ATAPI probe a=00 b=00 ata2: mask=03 status0=50 status1=00 ata2-master: ATA probe a=01 b=a5 ata2: devices=01 ata2: at 0x9400 on atapci1 ata3: iobase=0x8800 altiobase=0x8402 bmaddr=0x8008 ata3: mask=00 status0=ff status1=ff ata3: probe allocation failed pci-: pci1 exists, using next available unit number pcib1: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib1 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xc97ff,0xcc000-0xcffff,0xd0000-0xd1fff,0xd4000-0xd4fff on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x23 0x33 0x23 0x23 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x23 0x2b 0x23 0x23 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A isa_probe_children: probing PnP devices BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c420, tty 630018, net 670038 bpf: sl0 attached bpf: faith0 attached ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ata1-master: ata_command: timeout waiting for intr ata1-master: identify failed ata2-master: success setting UDMA5 on Promise chip Creating DISK ad4 ad4: <IBM-DTLA-307030/TX4OA60A> ATA-5 disk at ata2-master ad4: 29314MB (60036480 sectors), 59560 cyls, 16 heads, 63 S/T, 512 B/S ad4: 16 secs/int, 1 depth queue, UDMA100 ad4: piomode=4 dmamode=2 udmamode=5 cblid=1 Promise check1 failed ad4: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata2-master UDMA100 ata0-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata0-master: success setting PIO4 on generic chip acd0: <Pioneer DVD-ROM ATAPIModel DVD-105S 0111/E1.11> DVD-ROM drive at ata0 as master acd0: 512KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked Mounting root from ufs:/dev/ad4s3a ad4s1: type 0xc, start 63, end = 20980889, size 20980827 : OK ad4s2: type 0x83, start 20980890, end = 41945714, size 20964825 : OK ad4s3: type 0xa5, start 41945715, end = 60034904, size 18089190 : OK start_init: trying /sbin/init DEPENDENCY NOTE: portmap will be enabled to support NFS swapon: adding /dev/ad4s3b as swap device Automatic boot in progress... /dev/ad4s3a: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad4s3a: clean, 87942 free (78 frags, 10983 blocks, 0.1% fragmentation) /dev/ad4s3f: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad4s3f: clean, 7411773 free (26893 frags, 923110 blocks, 0.3% fragmentation) /dev/ad4s3e: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad4s3e: clean, 123815 free (55 frags, 15470 blocks, 0.0% fragmentation) Setup PC-CARD: pccardc: ioctl (PIOCRWMEM) : Invalid argument beep pccardd . Doing initial network setup: hostname . lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet 127.0.0.1 netmask 0xff000000 route: writing to routing socket : Network is unreachable add net default: gateway 203.18.245.245: Network is unreachable Additional routing options: TCP keepalive=YES . Routing daemons: . Additional daemons: syslogd . Doing additional network setup: portmap . Starting final network daemons: mountd Oct 15 19:23:11 consolidation mountd[154]: bad opt -alldirs Oct 15 19:23:11 consolidation mountd[154]: bad exports list line /usr/obj -ro NFS on reserved port only=YES nfsd rpc.statd . ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout Starting standard daemons: inetd cron sshd usbd . Initial rc.i386 initialization: apm . Configuring syscons: blank_time allscreens . Additional ABI support: linux Linux-ELF exec handler installed . Local package initialization: . Additional TCP options: . Mon Oct 15 19:23:14 CST 2001 Oct 15 19:23:48 consolidation login: ROOT LOGIN (root) ON ttyv0 pccard: card inserted, slot 0 pcic0: reset 1 int is 10 stat is 4f pcic0: reset 2 int is 70 stat is 4f pcic0: reset 3 int is 70 stat is 6f Oct 15 19:24:04 consolidation pccardd[100]: Card "Lucent Technologies"("WaveLAN/IEEE") [Version 01.01] [] matched "Lucent Technologies" ("WaveLAN/IEEE") [(null)] [(null)] pccard0: Assigning wi0: io 0x240-0x27f irq 3 mem 0x0-0xffffffff pcic: I/O win 0 flags 15 240-27f wi0: Forcing IRQ to 3 pcic: I/O win 0 flags 5 240-27f wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 3 slot 0 on pccard0 wi0: found Lucent chip pcic: I/O win 0 flags 15 240-27f wi0: Forcing IRQ to 3 using shared irq3. wi0: Ethernet address: 00:60:1d:f2:f5:eb wi0: wi_generic_attach:wi_has_wep = 1 bpf: wi0 attached Oct 15 19:24:09 consolidation pccardd[100]: wi0: Lucent Technologies (WaveLAN/IEEE) inserted. wi0: watchdog timeout wi0: watchdog timeout --------------000201040201050506030801-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3BCAB5D0.4000005>