Date: Fri, 18 Jan 2002 19:19:28 -0800 From: "Jin Guojun[ITG]" <j_guojun@lbl.gov> To: ashp@FreeBSD.org Cc: freebsd-bugs@FreeBSD.org Subject: Re: kern/27087: FreeBSD 4.3-RELEASE does not recognize GigE NIC Message-ID: <3C48E5C0.BDFAE09A@lbl.gov> References: <200201170303.g0H33S297380@freefall.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
ashp@FreeBSD.org wrote: > > Synopsis: FreeBSD 4.3-RELEASE does not recognize GigE NIC > > State-Changed-From-To: open->feedback > State-Changed-By: ashp > State-Changed-When: Wed Jan 16 19:02:49 PST 2002 > State-Changed-Why: > Hi, > > Is this still a problem for you? Which actual GigE device are you using? We'd > need more information, such as the exact make/model, and a 'boot -v' to begin > investigating things further. > > http://www.FreeBSD.org/cgi/query-pr.cgi?pr=27087 Yes, it is still the problem in 4.4-RELEASE. The work around is to add following lines into the /etc/rc.conf (for sk NIC): ------/etc/rc.conf # -- sysinstall generated deltas -- # Fri Dec 21 12:05:49 2001 # Created: Fri Dec 21 12:05:49 2001 # Enable network daemons for user convenience. # Please make all changes to this file, not to /etc/defaults/rc.conf. # This file now contains just the overrides from /etc/defaults/rc.conf. ifconfig sk0 # kldload /modules/if_sk.ko does not work sleep 2 ifconfig_sk0="inet xxx.yyy.zzz.hhh netmask 255.255.255.0 media 1000baseSX mediaopt -------end of /etc/rc.conf This is for sk NIC. I have not re-tested the ti NIC yet. I will try the ti NIC sometime next week. The kernel is the default one (GENERIC); the current kernel is a different one, but I do not think they make any difference, and I will confirm it when I test the ti driver next week. Below is the booting message. -Jin -------boot message ----- Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-RELEASE #1: Fri Dec 21 14:33:48 PST 2001 jin@xxx.yyy.zzz.hhh:/usr/src/sys/compile/USER Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(tm) Processor (787.51-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x621 Stepping = 1 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0400000<AMIE,DSP,3DNow!> real memory = 134201344 (131056K bytes) avail memory = 126373888 (123412K bytes) Preloaded elf kernel "kernel" at 0xc042b000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 8 entries at 0xc00f0e50 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <Trident model 9850 VGA-compatible display device> at 0.0 irq 11 isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 12 at device 4.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 12 at device 4.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa400-0xa41f mem 0xe0800000-0xe08fffff,0xe3000000-0xe3000fff irq 10 at device 10.0 on pci0 fxp0: Ethernet address 00:a0:c9:8c:bb:f5 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ncr0: <ncr 53c810 fast10 scsi> port 0xa000-0xa0ff mem 0xe0000000-0xe00000ff irq 11 at device 12.0 on pci0 pci0: <unknown card> (vendor=0x1148, dev=0x4300) at 13.0 irq 12 pcib1: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib1 orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcf7ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pca0 at port 0x40 on isa0 ad0: 2014MB <WDC AC22100L> [4092/16/63] at ata0-master UDMA33 acd0: CDROM <FX162T4> at ata0-slave using PIO3 Waiting 6 seconds for SCSI devices to settle da0 at ncr0 bus 0 target 1 lun 0 da0: <SEAGATE ST15230N 0298> Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da0: 4095MB (8386733 512 byte sectors: 255H 63S/T 522C) ### Note: the folowing message only appears when above /etc/rc.conf used skc0: <SysKonnect Gigabit Ethernet> port 0x9800-0x98ff mem 0xdf800000-0xdf803fff irq 12 at device 13.0 on pci0 skc0: SysKonnect SK-NET Gigabit Ethernet Adapter SK-9844 SX dual link sk0: <XaQti Corp. XMAC II> on skc0 sk0: Ethernet address: 00:00:5a:98:ea:24 sk1: <XaQti Corp. XMAC II> on skc0 sk1: Ethernet address: 00:00:5a:98:ea:25 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C48E5C0.BDFAE09A>