Date: Sun, 17 Feb 2002 04:12:38 -0500 From: Bryan Liesner <bleez@bellatlantic.net> To: stable <freebsd-stable@freebsd.org> Subject: Asus A7V266-E and CDROM... Message-ID: <3C6F7406.60108@bellatlantic.net>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------010904070709070005010802
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
I just purchased and installed an Asus A7V266-E motherboard that has a
problem when trying to mount one of my CDROMs. I looked around on the
archives and didn't really see an answer. The motherboard sees the
CDROM, and the boot probe seems to detect it correctly too.
mount /cdrom complains:
cd9660: /dev/acd0c: Invalid argument
acd1c (a Sony 24x R RW) mounts just fine.
Here's the fstab entries:
/dev/acd0c /cdrom cd9660 ro,noauto 0 0
/dev/acd1c /burner cd9660 ro,noauto 0 0
I tried putting the offending drive on the secondary controller with
the Sony, but no luck.
dmesg is atached
--
==========================================================
= Bryan D. Liesner LeezSoft Communications, Inc. =
= A subsidiary of LeezSoft Inc. =
= bleez@bellatlantic.net Home of the Gipper =
==========================================================
--------------010904070709070005010802
Content-Type: text/plain;
name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.txt"
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Sat Feb 16 22:34:46 EST 2002
bryan@gravy.kishka.net:/usr/src/sys/compile/GRAVY
Timecounter "i8254" frequency 1193220 Hz
CPU: AMD Athlon(TM) XP1800+ (1544.55-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<<b19>,AMIE,DSP,3DNow!>
real memory = 268353536 (262064K bytes)
avail memory = 257921024 (251876K bytes)
Preloaded elf kernel "kernel" at 0xc032f000.
Preloaded elf module "warp_saver.ko" at 0xc032f09c.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
Using $PIR table, 10 entries at 0xc00f1390
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 Trio3D/2X graphics accelerator> at 0.0
pcm0: <CMedia CMI8738> port 0xd800-0xd8ff irq 11 at device 5.0 on pci0
atapci0: <Promise ATA100 controller> port 0xb000-0xb03f,0xb400-0xb403,0xb800-0xb807,0xd000-0xd003,0xd400-0xd407 mem 0xef800000-0xef81ffff irq 10 at device 15.0 on pci0
ata2: at 0xd400 on atapci0
ata3: at 0xb800 on atapci0
dc0: <Macronix 98715AEC-C 10/100BaseTX> port 0xa800-0xa8ff mem 0xef000000-0xef0000ff irq 5 at device 16.0 on pci0
dc0: Ethernet address: 00:80:c6:f9:5b:0d
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 82C686 ATA100 controller> port 0xa400-0xa40f irq 0 at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
uhci0: <VIA 83C572 USB controller> port 0xa000-0xa01f irq 5 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: SM Media-Shuttle SM Media-Shuttle, rev 1.10/0.70, addr 2
ums0: Logitech Trackball, rev 1.10/2.20, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0x9800-0x981f irq 5 at device 17.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x9400-0x941f irq 5 at device 17.4 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcdfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 flags 0xf on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in ECP+EPP mode (EPP 1.9)
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Canon BJC-1000/1.21> PRINTER BJL,BJRaster,BSCC,TXT01
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
joy0 at port 0x201 on isa0
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
ad0: 19595MB <QUANTUM FIREBALLP AS20.5> [39813/16/63] at ata2-master UDMA100
ad1: 8693MB <WDC AC29100D> [17662/16/63] at ata3-master UDMA66
acd0: CDROM <CREATIVE CD5220-F> at ata0-master using PIO4
acd1: CD-RW <SONY CD-RW CRX175A1> at ata1-master using PIO4
ata1-slave: <HP COLORADO 8GB/2.050000> tape device - NO DRIVER!
Mounting root from ufs:/dev/ad0s1a
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SM Media -Shuttle > Removable Direct Access SCSI-CCS device
da0: 650KB/s transfers
da0: 31MB (64001 512 byte sectors: 64H 32S/T 31C)
--------------010904070709070005010802--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C6F7406.60108>