Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 07 Dec 2002 00:29:10 -0200
From:      Eduardo Maestri Righes <eduardo-righes@pop.com.br>
To:        freebsd-questions@freebsd.org
Subject:   FreeBSD Installation on HP Pavilion ZT1130
Message-ID:  <3DF15CF6.9000908@pop.com.br>

next in thread | raw e-mail | index | archive | help
Hi,

I'm trying to install the FreeBSD 4.7-RELEASE on my HP Pavilion ZT1130
notebook, but there is some problems.

Note: my notebook doesn't have floppy drive.

When a try to boot from my CD drive (actually a Toshiba DVD-ROM SD-R2102
drive), I got the following message:

BTX loader 1.00 BTX version is 1.01
Console: internal video/keyboard
BIOS drive C: is disk0
BIOS 639kB/244672kB available memory

FreeBSD/i386 bootstrap loader, Version 0.8
...
Can't work out which disk we are booting from.
Guessed BIOS device 0x0 not found by probes, defaulting to disk0:
...
Can't load 'kernel'
Can't load 'kernel.old'

I search for any information through search engines on the Internet,
but I can't find anything.

Below, there is some information about my machine.

Thanks in advance and sorry about the long message.

[]'s Eduardo

---//---

HP Pavilion ZT1130 PCI devices (the following info is an output form
lspci -vv from my Slackware Linux installation):

00:00.0 Host bridge: VIA Technologies, Inc. VT8605 [ProSavage PM133]
	Subsystem: Hewlett-Packard Company: Unknown device 0020
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Region 0: Memory at a0000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [a0] AGP version 2.0
		Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4
		Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x4
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:01.0 PCI bridge: VIA Technologies, Inc. VT8605 [PM133 AGP] (prog-if 
00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000c000-0000dfff
	Memory behind bridge: e0000000-efffffff
	Prefetchable memory behind bridge: 90000000-9fffffff
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.0 CardBus bridge: ENE Technology Inc: Unknown device 1410
	Subsystem: Hewlett-Packard Company: Unknown device 0020
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=02, subordinate=05, sec-latency=64
	I/O window 0: 00000000-00000003
	I/O window 1: 00000000-00000003
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite-
	16-bit legacy interface ports at 0001

00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C (rev 10)
	Subsystem: Hewlett-Packard Company: Unknown device 0020
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at e200 [size=256]
	Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.0 Communication controller: ESS Technology ES2838/2839 SuperLink 
Modem (rev 01)
	Subsystem: Hewlett-Packard Company: Unknown device 0020
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at e300 [size=16]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=55mA 
PME(D0+,D1-,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=0 PME-

00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] 
(rev 10)
	Subsystem: Hewlett-Packard Company: Unknown device 0020
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping+ SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) 
(prog-if 8a [Master SecP PriP])
	Subsystem: Hewlett-Packard Company: Unknown device 0020
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Region 4: I/O ports at 1100 [size=16]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 1e) (prog-if 00 
[UHCI])
	Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, cache line size 08
	Interrupt: pin D routed to IRQ 10
	Region 4: I/O ports at 1200 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 1e) (prog-if 00 
[UHCI])
	Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, cache line size 08
	Interrupt: pin D routed to IRQ 10
	Region 4: I/O ports at 1300 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10)
	Subsystem: Hewlett-Packard Company: Unknown device 0020
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Capabilities: [68] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 
AC97 Audio Controller (rev 40)
	Subsystem: Hewlett-Packard Company: Unknown device 0020
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin C routed to IRQ 9
	Region 0: I/O ports at e000 [size=256]
	Region 1: I/O ports at e100 [size=4]
	Region 2: I/O ports at e104 [size=4]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: S3 Inc. VT8603 [ProSavage PN133] 
AGP4X VGA Controller (Twister) (rev 02) (prog-if 00 [VGA])
	Subsystem: Hewlett-Packard Company: Unknown device 0020
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (1000ns min, 63750ns max), cache line size 04
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
	Region 1: Memory at 90000000 (32-bit, prefetchable) [size=128M]
	Expansion ROM at 000c0000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [80] AGP version 2.0
		Status: RQ=31 SBA- 64bit- FW- Rate=x4
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=x4


My current disk partitioning:


Disk /dev/hda: 255 heads, 63 sectors, 2432 cylinders
Units = cylinders of 16065 * 512 bytes

    Device Boot    Start       End    Blocks   Id  System
/dev/hda1             2         7     48195   84  OS/2 hidden C: drive
/dev/hda2   *         8      1024   8169052+   7  HPFS/NTFS
/dev/hda3          1025      1285   2096482+   c  Win95 FAT32 (LBA)
/dev/hda4          1286      2432   9213277+   5  Extended
/dev/hda5          1286      1318    265041   82  Linux swap
/dev/hda6          1319      2147   6658911   83  Linux
/dev/hda7          2148      2432   2289231   83  Linux


/proc/ioports from Slackware Linux 8.1


0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
1100-110f : VIA Technologies, Inc. Bus Master IDE
   1100-1107 : ide0
   1108-110f : ide1
1200-121f : VIA Technologies, Inc. UHCI USB
1300-131f : VIA Technologies, Inc. UHCI USB (#2)
c000-dfff : PCI Bus #01
e000-e0ff : VIA Technologies, Inc. AC97 Audio Controller
   e000-e0ff : via82cxxx_audio
e100-e103 : VIA Technologies, Inc. AC97 Audio Controller
   e100-e103 : via82cxxx_audio
e104-e107 : VIA Technologies, Inc. AC97 Audio Controller
   e104-e107 : via82cxxx_audio
e200-e2ff : Realtek Semiconductor Co., Ltd. RTL-8139
   e200-e2ff : 8139too
e300-e30f : ESS Technology ES2838/2839 SuperLink Modem


/proc/interrupts from Slackware Linux 8.1


            CPU0
   0:       9244          XT-PIC  timer
   1:        276          XT-PIC  keyboard
   2:          0          XT-PIC  cascade
   8:          1          XT-PIC  rtc
   9:          0          XT-PIC  via82cxxx
  10:          0          XT-PIC  eth0
  12:         21          XT-PIC  PS/2 Mouse
  14:       2462          XT-PIC  ide0
  15:          9          XT-PIC  ide1
NMI:          0
ERR:          0

-- 
[]'s Eduardo

Eduardo Maestri Righes <eduardo-righes@pop.com.br>



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3DF15CF6.9000908>