Date: Mon, 10 Feb 2003 15:45:11 -0700 From: Darren Spruell <darren_spruell@sento.com> To: freebsd-questions@freebsd.org Subject: Re: X problems on i810 | AddScreen/ScreenInit failed Message-ID: <3E482B77.9040703@sento.com> References: <20030210185635.GA694@dhumketu.homeunix.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Continuing on from my previous posting below, I have scoured some docs
to make some changes to the XF86Config:
* Added Option "DPMS" to Monitor section (by suggestion of list member)
* Added Option "NoDDC" to Device section (by suggestion of list member)
* Changed Device section to now read as follows, from i810 man page...
(in short, was using the vga driver, changed to the i810 driver.)
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "VGAClocks" # [<bool>]
#VideoRam 16
Option "NoDDC"
Identifier "Intel i810"
Driver "i810"
VendorName "Intel"
BoardName "i810-dc100"
BusID "PCI:0:1:0"
EndSection
The problem now is that when I run "XFree86 -xf86config
./XF86Config.new", it looks like the X display is coming up but all it
shows me is a 1 inch by 1 inch white square surrounded by a screen of
staticy purplish, bluish, and greenish lines.. and stays. Desktop never
displays.
The log file shows lines like this, with the following error:
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error: 999()
drmOpenDevice: Open failed
drmOpenDevice: minor is 1
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (Unknown error: 999()
drmOpenDevice: Open failed
[...]
drmOpenDevice: minor is 13
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (Unknown error: 999()
drmOpenDevice: Open failed
drmOpenDevice: minor is 14
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (Unknown error: 999()
drmOpenDevice: Open failed
drmOpenDevice: Open failed
(II) I810(0): [drm] drmOpen failed
(EE) I810(0): [dri] DRIScreenInit failed. Disabling DRI.
Any other suggestions?
DS
> +++ Darren Spruell [freebsd] [10-02-03 11:07 -0700]:
> | Date: Mon, 10 Feb 2003 11:07:22 -0700
> | From: Darren Spruell <darren_spruell@sento.com>
> | Subject: X problems on i810 | AddScreen/ScreenInit failed
> |
> | Greetz,
> |
> | I'm trying to configure v4.7 to run X but am having a hard time getting
> | the server to start.
> |
> | I've followed the config instructions at
> | http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x-config.html
> | by doing the following steps:
> |
> | Run XFree86 -configure
> | to create the default XF86Config.new
> | Run XFree86 -xf86config ./XF86Config.new
> | to ensure that it works w/my hardware
> | Edit it to taste, to change specifics for HorizSync, VertRefresh, and
> | the Display subsection under "Screen".
> |
> | However, running 'XFree86 -xf86config ./XF86Config.new' after changing
> | my config does not work. The output error is:
> |
> | ======================================================================
> | (==) VGA(0): Write-combining range (0xa0000,0x10000) was already clear
> |
> | Fatal server error:
> | AddScreen/ScreenInit failed for driver 0
> | ======================================================================
> |
> | I followed through the part in the Advanced Configuration section about
> | adding in support for agpgart and created the device node and added the
> | following to /boot/loader.conf:
> | agp_load="YES"
> |
> | dmesg now shows:
> | Preloaded elf module "agp.ko" at 0xc051a09c.
> | agp0: <Intel 82810-DC100 (i810-DC100 GMCH) SVGA controller> mem
> | 0xffa80000-0xffafffff,0xf8000000-0xfbffffff irq 11 at device 1.0 on pci0
> |
> | Here is the current XF86Config.new (non-working). The Monitor section
> | was taken from a specs page on the Monitor (Gateway EV700). Full dmesg
> | included below this:
> |
> | Section "ServerLayout"
> | Identifier "XFree86 Configured"
> | Screen 0 "Screen0" 0 0
> | InputDevice "Mouse0" "CorePointer"
> | InputDevice "Keyboard0" "CoreKeyboard"
> | EndSection
> |
> | Section "Files"
> | RgbPath "/usr/X11R6/lib/X11/rgb"
> | ModulePath "/usr/X11R6/lib/modules"
> | FontPath "/usr/X11R6/lib/X11/fonts/misc/"
> | FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
> | FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
> | FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
> | FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
> | EndSection
> |
> | Section "Module"
> | Load "dbe"
> | Load "dri"
> | Load "extmod"
> | Load "glx"
> | Load "pex5"
> | Load "record"
> | Load "xie"
> | Load "xtrap"
> | Load "speedo"
> | Load "type1"
> | EndSection
> |
> | Section "InputDevice"
> | Identifier "Keyboard0"
> | Driver "keyboard"
> | EndSection
> |
> | Section "InputDevice"
> | Identifier "Mouse0"
> | Driver "mouse"
> | Option "Protocol" "MouseSystems"
> | Option "Device" "/dev/sysmouse"
> | EndSection
> |
> | Section "Monitor"
> | Identifier "Monitor0"
> | VendorName "Gateway"
> | ModelName "EV700"
> | HorizSync 30 - 69
> | VertRefresh 50 - 110
> | EndSection
> |
> | Section "Device"
> | ### Available Driver options are:-
> | ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> | ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> | ### [arg]: arg optional
> | #Option "ShadowFB" # [<bool>]
> | #Option "VGAClocks" # [<bool>]
> | Identifier "Card0"
> | Driver "vga"
> | VendorName "Intel"
> | BoardName "i810-dc100"
> | BusID "PCI:0:1:0"
> | EndSection
> |
> | Section "Screen"
> | Identifier "Screen0"
> | Device "Card0"
> | Monitor "Monitor0"
> | DefaultDepth 16
> | SubSection "Display"
> | Depth 16
> | Modes "1024x768"
> | EndSubSection
> | EndSection
> |
> | Copyright (c) 1992-2002 The FreeBSD Project.
> | Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> | The Regents of the University of California. All rights reserved.
> | FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002
> | root@builder.freebsdmall.com:/usr/obj/usr/src/sys/GENERIC
> | Timecounter "i8254" frequency 1193182 Hz
> | CPU: Pentium III/Pentium III Xeon/Celeron (697.88-MHz 686-class CPU)
> | Origin = "GenuineIntel" Id = 0x686 Stepping = 6
> |
> | Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> | real memory = 267124736 (260864K bytes)
> | avail memory = 254693376 (248724K bytes)
> | Preloaded elf kernel "kernel" at 0xc051a000.
> | Preloaded elf module "agp.ko" at 0xc051a09c.
> | Pentium Pro MTRR support enabled
> | md0: Malloc disk
> | Using $PIR table, 11 entries at 0xc00f35a0
> | npx0: <math processor> on motherboard
> | npx0: INT 16 interface
> | pcib0: <Intel 82810-DC100 (i810-DC100 GMCH) Host To Hub bridge> on
> | motherboard
> | pci0: <PCI bus> on pcib0
> | agp0: <Intel 82810-DC100 (i810-DC100 GMCH) SVGA controller> mem
> | 0xffa80000-0xffafffff,0xf8000000-0xfbffffff irq 11 at device 1.0 on pci0
> | pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
> | pci1: <PCI bus> on pcib1
> | fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdf00-0xdf3f mem
> | 0xff700000-0xff7fffff,0xff8ff000-0xff8fffff irq 3 at device 1.0 on pci1
> | fxp0: Ethernet address 00:03:47:0b:0e:20
> | inphy0: <i82555 10/100 media interface> on miibus0
> | inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> | isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
> | isa0: <ISA bus> on isab0
> | atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1
> | on pci0
> | ata0: at 0x1f0 irq 14 on atapci0
> | ata1: at 0x170 irq 15 on atapci0
> | uhci0: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 10 at
> | device 31.2 on pci0
> | usb0: <Intel 82801AA (ICH) USB controller> on uhci0
> | usb0: USB revision 1.0
> | uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> | uhub0: 2 ports with 2 removable, self powered
> | pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9
> | chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port
> | 0xef00-0xef3f,0xe800-0xe8ff irq 9 at device 31.5 on pci0
> | orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xcc000-0xccfff on isa0
> | fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> | fdc0: FIFO enabled, 8 bytes threshold
> | fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> | atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> | atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> | kbd0 at atkbd0
> | psm0: failed to get data.
> | psm0: <PS/2 Mouse> irq 12 on atkbdc0
> | psm0: model IntelliMouse, device ID 3
> | vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> | sc0: <System console> at flags 0x100 on isa0
> | sc0: VGA <16 virtual consoles, flags=0x300>
> | sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> | sio0: type 16550A
> | sio1: configured irq 3 not in bitmap of probed irqs 0
> | ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> | ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> | ppc0: FIFO with 16/16/8 bytes threshold
> | plip0: <PLIP network interface> on ppbus0
> | lpt0: <Printer> on ppbus0
> | lpt0: Interrupt-driven port
> | ppi0: <Parallel I/O> on ppbus0
> | ad0: 14324MB <QUANTUM FIREBALLlct15 15> [29104/16/63] at ata0-master UDMA66
> | acd0: MODE_SENSE_BIG trying to write on read buffer
> | acd0: MODE_SENSE_BIG - NO SENSE asc=0x00 ascq=0x00 error=0x04
> | acd0: CDROM <CD-224E> at ata1-slave PIO4
> | Mounting root from ufs:/dev/ad0s1a
> | WARNING: / was not properly dismounted
> |
> |
> | THANKS IN ADVANCE!!!
> |
> | - --
> | Darren Spruell
> | Sento IS Department
> | darren_spruell@sento.com
> |
> | ------------------------------
> |
> | End of questions-digest V5 #1894
> | ********************************
> |
> | To Unsubscribe: send mail to majordomo@FreeBSD.org
> | with unsubscribe freebsd-questions-digest in the body of the message
>
--
Darren Spruell
Sento IS Department
darren_spruell@sento.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E482B77.9040703>