Date: Sun, 20 Apr 2003 19:13:38 -0700 From: Daniel Kives <dankives@cats.ucsc.edu> To: freebsd-questions@FreeBSD.ORG Subject: My sound doesn't work Message-ID: <3EA353D2.385ABC30@cats.ucsc.edu>
next in thread | raw e-mail | index | archive | help
Hello, I sent this question earlier, but at the time, my email wasn't
working, so if there was a reply, I didn't
get it. Sorry, if you did reply to this question earlier, I'd
appreciate if you could do so again. Sorry. Thank
you for your patience.
My sound doesn't work. I've been searching around google, I've tried
different things still no sound. This is
some of my info. I have a Sound Blaster Live with Digital Audio
Output. I read the handbook, and tried to follow the page about setting
up the Sound Card.
I added device pcm to my kernel. Then I rebuilt the kernel. Here's my
output, and it seems my computer
recognizes the device.
grep pcm /var/run/dmesg.boot
pcm0: <Creative EMU10K1> port 0xeec0-0xeedf irq 9 at device 9.0 on pci0
pcm0: <TriTech TR28602 ac97 codec>
Then I ran
cd /dev
sh MAKEDEV snd0
I cd to my /dev directory and did an ls -la to all the device nodes the
handbook says I should have: here's the
output.
/dev#ls -la audio
lrwxrwxrwx 1 root wheel 6 Apr 14 18:03 audio -> audio0
/dev#ls -la dsp
lrwxrwxrwx 1 root wheel 4 Apr 14 18:03 dsp -> dsp0
/dev#ls -la dspW
lrwxrwxrwx 1 root wheel 5 Apr 14 18:03 dspW -> dspW0
/dev#ls -la midi
ls: midi: No such file or directory
/dev#ls -la mixer
lrwxrwxrwx 1 root wheel 6 Apr 14 18:03 mixer -> mixer0
/dev#ls -la music
lrwxrwxrwx 1 root wheel 6 Apr 14 18:03 music -> music0
/dev#ls -la sequencer
lrwxrwxrwx 1 root wheel 10 Apr 14 18:03 sequencer -> sequencer0
/dev#ls -la pss
lrwxrwxrwx 1 root wheel 4 Apr 14 18:03 pss -> pss0
I noticed, it didn't create a midi device node, this might be my
problem. I noticed other people had this
problem, though I found no solutions for it.
Here's some more output, hopefully this helps someone.. I hope I gave
enough information, and any
suggestions or replies would be appreciated.
cat /dev/sndstat
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: <Creative EMU10K1> at io 0xeec0 irq 9 (4p/2r/0v channels duplex)
dmesg
cal[2831]: fatal: open database /etc/aliases.db: No such file or
directory
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to
stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 1
done
Uptime: 2h36m18s
Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-PRERELEASE #3: Mon Mar 31 21:30:28 PST 2003
dankives@192.168.1.102:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (1001.78-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 335413248 (327552K bytes)
avail memory = 320344064 (312836K bytes)
Preloaded elf kernel "kernel" at 0xc057f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00f4fc0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 8363 (Apollo KT133) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xffa0-0xffaf at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xef40-0xef5f irq 10 at device
7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xef80-0xef9f irq 10 at device
7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
pcm0: <Creative EMU10K1> port 0xeec0-0xeedf irq 9 at device 9.0 on pci0
pcm0: <TriTech TR28602 ac97 codec>
atapci1: <Promise ATA100 controller> port
0xef00-0xef3f,0xefa8-0xefab,0xefa0-0xefa7,0xefac-0xefaf,0xefe0-0xefe7
mem 0xfebe0000-0xfebfffff irq 10 at device 10.0 on pci0
ata2: at 0xefe0 on atapci1
ata3: at 0xefa0 on atapci1
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec00-0xec7f mem
0xfebcfc00-0xfebcfc7f irq 5 at device 12.0 on pci0
xl0: Ethernet address: 00:01:03:26:e5:35
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x14e4, dev=0x4211) at 13.0 irq 9
pci0: <unknown card> (vendor=0x14e4, dev=0x4212) at 13.1 irq 9
orm0: <Option ROMs> at iomem
0xc0000-0xc9fff,0xcc000-0xcdfff,0xce000-0xce7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad4: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-master UDMA100
acd0: CDROM <MATSHITA CR-594> at ata1-master PIO4
acd1: CD-RW <LG CD-RW CED-8083B> at ata1-slave PIO4
Mounting root from ufs:/dev/ad4s2a
pid 279 (squid), uid 65534: exited on signal 6
pid 292 (squid), uid 65534: exited on signal 6
pid 303 (squid), uid 65534: exited on signal 6
pid 305 (squid), uid 65534: exited on signal 6
pid 316 (squid), uid 65534: exited on signal 6
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3EA353D2.385ABC30>