Date: Wed, 07 Jan 2004 16:46:12 -0800 From: Yu-Shun Wang <yushunwa@ISI.EDU> To: current@freebsd.org Cc: Alan Cox <alc@FreeBSD.org> Subject: Immediate reboot after memory probe Message-ID: <3FFCA854.7040707@isi.edu> In-Reply-To: <200312220101.hBM11WgL071526@repoman.freebsd.org> References: <200312220101.hBM11WgL071526@repoman.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a cryptographically signed message in MIME format. --------------ms070108040908020005070203 Content-Type: multipart/mixed; boundary="------------050406040009030705040109" This is a multi-part message in MIME format. --------------050406040009030705040109 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Hi, Updated a couple of machines after the holiday and they blowed up on me. :-) As said in the subject, after installing the new kernel based on today's current, the machines (Dell duo Xeon 2.4GHz with 1G RDRAM) would not boot, or more precisely they'd immediately reboot after preloading the modules and showing the CPU/Mem specs: From dmesg: <snip> Preloaded elf module "/boot/kernel/iicsmb.ko" at 0xc09db4fc. Preloaded elf module "/boot/kernel/uart.ko" at 0xc09db5a8. Timecounter "i8254" frequency 1193118 Hz quality 0 CPU: Intel(R) XEON(TM) CPU 2.40GHz (2372.80-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> Hyperthreading: 2 logical CPUs real memory = 1073180672 (1023 MB) avail memory = 1032687616 (984 MB) *** (Rebooted at this point!) *** With a bit of digging and luck (not debugging, I am new to kernel debugging and don't have the environment setup to generate tracebacks), I managed to find the probable cause: sys/i386/i386/pmap.c from the commit log included below. After reversed the diff between 1.456 and 1.457, the problem was fixed. Weird thing is, it seems like I am the only one hit by this problem. I couldn't find any message on CURRENT list regarding this. Anyways, dmesg & kernel conf files are also attached. Please let me know if you need more info. Thanks, yushun. Alan Cox wrote: > alc 2003/12/21 17:01:32 PST > > FreeBSD src repository > > Modified files: > sys/amd64/amd64 pmap.c > sys/i386/i386 pmap.c > sys/vm uma_int.h > Log: > - Significantly reduce the number of preallocated pv entries in > pmap_init(). Such a large preallocation is unnecessary and wastes > nearly eight megabytes of kernel virtual address space per gigabyte > of managed physical memory. > - Increase UMA_BOOT_PAGES by two. This enables the removal of > pmap_pv_allocf(). (Note: this function was only used during > initialization, specifically, after pmap_init() but before > pmap_init2(). During pmap_init2(), a new allocator is installed.) > > Revision Changes Path > 1.449 +1 -14 src/sys/amd64/amd64/pmap.c > 1.457 +1 -14 src/sys/i386/i386/pmap.c > 1.22 +1 -1 src/sys/vm/uma_int.h > _______________________________________________ > cvs-all@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/cvs-all > To unsubscribe, send any mail to "cvs-all-unsubscribe@freebsd.org" > > http://www.FreeBSD.org/cgi/cvsweb.cgi/src/sys/amd64/amd64/pmap.c.diff?&r1=1.448&r2=1.449&f=h > http://www.FreeBSD.org/cgi/cvsweb.cgi/src/sys/i386/i386/pmap.c.diff?&r1=1.456&r2=1.457&f=h > http://www.FreeBSD.org/cgi/cvsweb.cgi/src/sys/vm/uma_int.h.diff?&r1=1.21&r2=1.22&f=h -- Yu-Shun Wang <yushunwa@isi.edu> USC Information Sciences Institute --------------050406040009030705040109 Content-Type: text/plain; name="dmesg.nik" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.nik" cam: using minimum scsi_delay (100ms) Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #15: Wed Jan 7 15:48:28 PST 2004 yushunwa@nik.isi.edu:/usr/obj/usr/src/sys/KERNEL-1.34 Preloaded elf kernel "/boot/kernel/kernel" at 0xc09d9000. Preloaded elf module "/boot/kernel/vesa.ko" at 0xc09d921c. Preloaded elf module "/boot/kernel/md.ko" at 0xc09d92c8. Preloaded elf module "/boot/kernel/linux.ko" at 0xc09d9370. Preloaded elf module "/boot/kernel/if_gif.ko" at 0xc09d941c. Preloaded elf module "/boot/kernel/if_tun.ko" at 0xc09d94c8. Preloaded elf module "/boot/kernel/ipfw.ko" at 0xc09d9574. Preloaded elf module "/boot/kernel/if_an.ko" at 0xc09d9620. Preloaded elf module "/boot/kernel/wlan.ko" at 0xc09d96cc. Preloaded elf module "/boot/kernel/rc4.ko" at 0xc09d9778. Preloaded elf module "/boot/kernel/pccard.ko" at 0xc09d9820. Preloaded elf module "/boot/kernel/if_em.ko" at 0xc09d98cc. Preloaded elf module "/boot/kernel/if_fxp.ko" at 0xc09d9978. Preloaded elf module "/boot/kernel/miibus.ko" at 0xc09d9a24. Preloaded elf module "/boot/kernel/if_lnc.ko" at 0xc09d9ad0. Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc09d9b7c. Preloaded elf module "/boot/kernel/if_xl.ko" at 0xc09d9c28. Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc09d9cd4. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc09d9d84. Preloaded elf module "/boot/kernel/snd_es137x.ko" at 0xc09d9e30. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc09d9ee0. Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc09d9f8c. Preloaded elf module "/boot/kernel/ugen.ko" at 0xc09da040. Preloaded elf module "/boot/kernel/usb.ko" at 0xc09da0ec. Preloaded elf module "/boot/kernel/uhid.ko" at 0xc09da194. Preloaded elf module "/boot/kernel/ukbd.ko" at 0xc09da240. Preloaded elf module "/boot/kernel/ulpt.ko" at 0xc09da2ec. Preloaded elf module "/boot/kernel/ums.ko" at 0xc09da398. Preloaded elf module "/boot/kernel/umass.ko" at 0xc09da440. Preloaded elf module "/boot/kernel/umodem.ko" at 0xc09da4ec. Preloaded elf module "/boot/kernel/ucom.ko" at 0xc09da598. Preloaded elf module "/boot/kernel/bktr.ko" at 0xc09da644. Preloaded elf module "/boot/kernel/bktr_mem.ko" at 0xc09da6f0. Preloaded elf module "/boot/kernel/agp.ko" at 0xc09da7a0. Preloaded elf module "/boot/kernel/random.ko" at 0xc09da848. Preloaded elf module "/boot/kernel/ip_mroute.ko" at 0xc09da8f4. Preloaded elf module "/boot/kernel/ip6fw.ko" at 0xc09da9a4. Preloaded elf module "/boot/kernel/netgraph.ko" at 0xc09daa50. Preloaded elf module "/boot/kernel/dummynet.ko" at 0xc09dab00. Preloaded elf module "/boot/kernel/radeon.ko" at 0xc09dabb0. Preloaded elf module "/boot/kernel/r128.ko" at 0xc09dac5c. Preloaded elf module "/boot/kernel/ahc.ko" at 0xc09dad08. Preloaded elf module "/boot/kernel/mpt.ko" at 0xc09dadb0. Preloaded elf module "/boot/kernel/fdc.ko" at 0xc09dae58. Preloaded elf module "/boot/kernel/cbb.ko" at 0xc09daf00. Preloaded elf module "/boot/kernel/exca.ko" at 0xc09dafa8. Preloaded elf module "/boot/kernel/cardbus.ko" at 0xc09db054. Preloaded elf module "/boot/kernel/lpt.ko" at 0xc09db100. Preloaded elf module "/boot/kernel/ubsa.ko" at 0xc09db1a8. Preloaded elf module "/boot/kernel/smbus.ko" at 0xc09db254. Preloaded elf module "/boot/kernel/smb.ko" at 0xc09db300. Preloaded elf module "/boot/kernel/iicbus.ko" at 0xc09db3a8. Preloaded elf module "/boot/kernel/iic.ko" at 0xc09db454. Preloaded elf module "/boot/kernel/iicsmb.ko" at 0xc09db4fc. Preloaded elf module "/boot/kernel/uart.ko" at 0xc09db5a8. Timecounter "i8254" frequency 1193118 Hz quality 0 CPU: Intel(R) XEON(TM) CPU 2.40GHz (2372.80-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> Hyperthreading: 2 logical CPUs real memory = 1073180672 (1023 MB) avail memory = 1032687616 (984 MB) ACPI APIC Table: <DELL WS 530 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0: Changing APIC ID to 4 ioapic0 <Version 2.0> irqs 0-23 on motherboard bktr_mem: memory holder loaded VESA: v2.0, 65536k memory, flags:0x1, mode table:0xc0769a22 (1000022) VESA: ATI RADEON RV250 Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL WS 530 > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 12 entries at 0xc00fb9a0 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_cpu2: <CPU> on acpi0 acpi_cpu3: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82860 host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci_cfgintr: 1:0 INTA BIOS irq 11 drm0: <ATI Radeon If R250 9000> port 0xec00-0xecff mem 0xff8f0000-0xff8fffff,0xf4000000-0xf7ffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xe8000000 128MB info: [drm] Initialized radeon 1.10.0 20020828 on minor 0 pci1: <display> at device 0.1 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pci3: <base peripheral, interrupt controller> at device 0.0 (no driver attached) mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xdc00-0xdcff mem 0xff6a0000-0xff6bffff,0xff6c0000-0xff6dffff irq 20 at device 12.0 on pci3 mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xd800-0xd8ff mem 0xff660000-0xff67ffff,0xff680000-0xff69ffff irq 21 at device 12.1 on pci3 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xd4c0-0xd4ff mem 0xff640000-0xff65ffff irq 21 at device 13.0 on pci3 em0: Speed:N/A Duplex:N/A pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib4 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xcc80-0xccff mem 0xff3ffc00-0xff3ffc7f irq 23 at device 11.0 on pci4 xl0: Ethernet address: 00:06:5b:bd:ee:48 miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci4: <serial bus, FireWire> at device 12.0 (no driver attached) pcm0: <Creative EMU10K1> port 0xcc60-0xcc7f irq 18 at device 14.0 on pci4 pcm0: <Cirrus Logic CS4297A AC97 Codec> bktr0: <BrookTree 878> mem 0xf80ff000-0xf80fffff irq 19 at device 15.0 on pci4 bktr0: Hauppauge Model 61381 D423 bktr0: Detected a MSP3430G-A4 at 0x80 bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, msp3400c stereo, remote control. pci4: <multimedia> at device 15.1 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xff80-0xff9f irq 19 at device 31.2 on pci0 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: NMB Dell USB Keyboard Hub, class 9/0, rev 1.10/0.01, addr 2 uhub1: 3 ports with 2 removable, bus powered ukbd0: NMB Dell USB 7HK Keyboard, rev 1.10/0.01, addr 3, iclass 3/1 kbd0 at ukbd0 ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 4, iclass 3/1 ums0: 5 buttons and Z dir. pci0: <serial bus, SMBus> at device 31.3 (no driver attached) uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xff60-0xff7f irq 23 at device 31.4 on pci0 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port pmtimer0 on isa0 orm0: <Option ROMs> at iomem 0xd1000-0xd3fff,0xcd000-0xd0fff,0xc0000-0xccfff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec IPv6 packet filtering initialized, logging disabled ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled IPsec: Initialized Security Association Processing. GEOM: create disk ad0 dp=0xc6b06360 ad0: 78167MB <Maxtor 4D080H4> [158816/16/63] at ata0-master UDMA100 acd0: CDRW <PHILIPS DVD+RW-D28> at ata1-master UDMA33 em0: Link is up 1000 Mbps Full Duplex GEOM: create disk da0 dp=0xc6c32050 GEOM: create disk da1 dp=0xc6c36c50 da0 at mpt1 bus 0 target 0 lun 0 da0: <SEAGATE ST336732LW 2223> Fixed Direct Access SCSI-3 device da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) da1 at mpt1 bus 0 target 1 lun 0 da1: <SEAGATE ST336732LW 2223> Fixed Direct Access SCSI-3 device da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) SMP: AP CPU #2 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! Mounting root from ufs:/dev/da0s1a em0: Link is up 1000 Mbps Full Duplex em0: Link is up 1000 Mbps Full Duplex em0: Link is up 1000 Mbps Full Duplex pid 937 (checkvm), uid 0: exited on signal 10 (core dumped) info: [drm] Loading R200 Microcode drm0: [MPSAFE] pid 1468 (checkvm), uid 0: exited on signal 10 (core dumped) --------------050406040009030705040109 Content-Type: text/plain; name="KERNEL.nik" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="KERNEL.nik" # $Id: KERNEL,v 1.34 2003/11/05 16:41:55 larse Exp $ # This directive is mandatory; it defines the architecture to be # configured for; in this case, the 386 family based IBM-PC and # compatibles. # machine i386 # This is the ``identification'' of the kernel. Usually this should # be the same as the name of your kernel. # ident KERNEL # We need the revision for the automated periodic update script. # $Revision: 1.34 $ # This allows you to actually store this configuration file into # the kernel binary itself, where it may be later read by saying: # strings -n 3 /boot/kernel/kernel | sed -n 's/^___//p' > MYKERNEL # options INCLUDE_CONFIG_FILE # Include this file in kernel # The `maxusers' parameter controls the static sizing of a number of # internal system tables by a formula defined in subr_param.c. Setting # maxusers to 0 will cause the system to auto-size based on physical # memory. # maxusers 0 # The `makeoptions' parameter allows variables to be passed to the # generated Makefile in the build area. # # CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS} # after most other flags. Here we use it to inhibit use of non-optimal # gcc builtin functions (e.g., memcmp). # # DEBUG happens to be magic. # The following is equivalent to 'config -g KERNELNAME' and creates # 'kernel.debug' compiled with -g debugging as well as a normal # 'kernel'. Use 'make install.debug' to install the debug kernel # but that isn't normally necessary as the debug symbols are not loaded # by the kernel and are not useful there anyway. # makeoptions CONF_CFLAGS="-fno-builtin" makeoptions DEBUG=-g ##################################################################### # SCHEDULER OPTIONS ##################################################################### # Scheduler options: # # Specifying one of SCHED_4BSD or SCHED_ULE is mandatory. These options # select which scheduler is compiled in. # # SCHED_4BSD is the historical, proven, BSD scheduler. It has a global run # queue and no cpu affinity which makes it suboptimal for SMP. It has very # good interactivity and priority selection. # # SCHED_ULE is a new experimental scheduler that has been designed for SMP, # but will work just fine on UP too. Users of this scheduler should expect # some hicups and be prepaired to provide feedback. # options SCHED_4BSD #options SCHED_ULE ##################################################################### # SMP OPTIONS ##################################################################### # APIC_IO enables the use of the IO APIC for Symmetric I/O. # An SMP kernel will ONLY run on an Intel MP spec. qualified motherboard. # device apic # I/O apic # SMP enables building of a Symmetric MultiProcessor Kernel. # options SMP # Symmetric MultiProcessor Kernel # SMP Debugging Options: # # MUTEX_DEBUG enables various extra assertions in the mutex code. # WITNESS enables the witness code which detects deadlocks and cycles # during locking operations. # WITNESS_DDB causes the witness code to drop into the kernel debugger if # a lock heirarchy violation occurs or if locks are held when going to # sleep. # WITNESS_SKIPSPIN disables the witness checks on spin mutexes. # #options MUTEX_DEBUG #options WITNESS #options WITNESS_DDB #options WITNESS_SKIPSPIN ##################################################################### # CPU OPTIONS ##################################################################### # You must specify at least one CPU (the one you intend to run on); # deleting the specification for CPUs you don't need to use may make # parts of the system run faster. # #cpu I586_CPU # aka Pentium(tm) cpu I686_CPU # aka Pentium Pro(tm) # CPU_DISABLE_5X86_LSSER disables load store serialize (i.e. enables # reorder). This option should not be used if you use memory mapped # I/O device(s). # # CPU_FASTER_5X86_FPU enables faster FPU exception handler. # # CPU_PPRO2CELERON enables L2 cache of Mendocino Celeron CPUs. This option # is useful when you use Socket 8 to Socket 370 converter, because most Pentium # Pro BIOSs do not enable L2 cache of Mendocino Celeron CPUs. # # CPU_UPGRADE_HW_CACHE eliminates unneeded cache flush instruction(s). # # CPU_DISABLE_CMPXCHG disables the CMPXCHG instruction on > i386 IA32 # machines. VmWare seems to emulate this instruction poorly, causing # the guest OS to run very slowly. # #options CPU_DISABLE_5X86_LSSER #options CPU_FASTER_5X86_FPU #options CPU_PPRO2CELERON #options CPU_UPGRADE_HW_CACHE #options CPU_DISABLE_CMPXCHG # PERFMON causes the driver for Pentium/Pentium Pro performance counters # to be compiled. See perfmon(4) for more information. # #options PERFMON ##################################################################### # NETWORKING OPTIONS ##################################################################### # DEVICE_POLLING adds support for mixed interrupt-polling handling # of network device drivers, which has significant benefits in terms # of robustness to overloads and responsivity, as well as permitting # accurate scheduling of the CPU time between kernel network processing # and other activities. The drawback is a moderate (up to 1/HZ seconds) # potential increase in response times. # It is strongly recommended to use HZ=1000 or 2000 with DEVICE_POLLING # to achieve smoother behaviour. # Additionally, you can enable/disable polling at runtime with the # sysctl variable kern.polling.enable (defaults off), and select # the CPU fraction reserved to userland with the sysctl variable # kern.polling.user_frac (default 50, range 0..100). # # Only the "dc" "fxp" and "sis" devices support this mode of operation at # the time of this writing. # #options DEVICE_POLLING ##################################################################### # CLOCK OPTIONS ##################################################################### # The following two options measure the frequency of the corresponding # clock relative to the RTC (onboard mc146818a). # options CLK_USE_I8254_CALIBRATION #options CLK_USE_TSC_CALIBRATION ##################################################################### # HARDWARE BUS CONFIGURATION ##################################################################### # ISA bus # device isa # AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # This option breaks suspend/resume on some portables. # # AUTO_EOI_2 enables the `automatic EOI' feature for the slave 8259A # interrupt controller. This saves about 0.7-1.25 usec for each interrupt. # Automatic EOI is documented not to work for for the slave with the # original i8259A, but it works for some clones and some integrated # versions. # # THESE OPTIONS ALSO PREVENTS THE KERNEL FROM RUNNING INSIDE VMWARE! # #options AUTO_EOI_1 #options AUTO_EOI_2 # EISA bus # #device eisa # PCI bus & PCI options: # device pci # Temporarily (11-05-03): # device acpi ##################################################################### # HARDWARE DEVICE CONFIGURATION ##################################################################### # The Numeric Processing eXtension driver. # device npx # pmtimer: Timer device driver for power management events (APM or ACPI) # device pmtimer # Adjust system timer at wakeup time ##################################################################### # VM OPTIONS ##################################################################### # Disable the 4 MByte page PSE CPU feature. The PSE feature allows the # kernel to use a 4 MByte pages to map the kernel instead of 4k pages. # This saves on the amount of memory needed for page tables needed to # map the kernel. You should only disable this feature as a temporary # workaround if you are having problems with it enabled. # #options DISABLE_PSE # Disable the global pages PGE CPU feature. The PGE feature allows pages # to be marked with the PG_G bit. TLB entries for these pages are not # flushed from the cache when %cr3 is reloaded. This can make context # switches less expensive. You should only disable this feature as a # temporary workaround if you are having problems with it enabled. # #options DISABLE_PG_G ##################################################################### # COMPATIBILITY OPTIONS ##################################################################### # Implement system calls compatible with 4.3BSD and older versions of # FreeBSD. You probably do NOT want to remove this as much current code # still relies on the 4.3 emulation. # options COMPAT_43 # Enable FreeBSD4 compatibility syscalls options COMPAT_FREEBSD4 # These three options provide support for System V Interface # Definition-style interprocess communication, in the form of shared # memory, semaphores, and message queues, respectively. # options SYSVSHM options SYSVSEM options SYSVMSG ##################################################################### # DEBUGGING OPTIONS ##################################################################### # Enable the kernel debugger. # options DDB # KTRACE enables the system-call tracing facility ktrace(2). To be more # SMP-friendly, KTRACE uses a worker thread to process most trace events # asynchronously to the thread generating the event. This requires a # pre-allocated store of objects representing trace events. The # options KTRACE #kernel tracing # The INVARIANTS option is used in a number of source files to enable # extra sanity checking of internal structures. This support is not # enabled by default because of the extra time it would take to check # for these conditions, which can only occur as a result of # programming errors. # #options INVARIANTS # The INVARIANT_SUPPORT option makes us compile in support for # verifying some of the internal structures. It is a prerequisite for # 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be # called. The intent is that you can set 'INVARIANTS' for single # source files (by changing the source file or specifying it on the # command line) if you have 'INVARIANT_SUPPORT' enabled. Also, if you # wish to build a kernel module with 'INVARIANTS', then adding # 'INVARIANT_SUPPORT' to your kernel will provide all the necessary # infrastructure without the added overhead. # #options INVARIANT_SUPPORT # The DIAGNOSTIC option is used to enable extra debugging information # from some parts of the kernel. As this makes everything more noisy, # it is disabled by default. # #options DIAGNOSTIC ##################################################################### # NETWORKING OPTIONS ##################################################################### # Protocol families: # Only the INET (Internet) family is officially supported in FreeBSD. # Source code for the NS (Xerox Network Service) is provided for amusement # value. # options INET #Internet communications protocols options INET6 #IPv6 communications protocols options IPSEC #IP security options IPSEC_ESP #IP security (crypto; define w/ IPSEC) # Network interfaces: # The `loop' device is MANDATORY when networking is enabled. # The `ether' device provides generic code to handle # Ethernets; it is MANDATORY when a Ethernet device driver is # configured or token-ring is enabled. # The `bpf' device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. # device ether #Generic Ethernet device loop #Network loopback device device bpf #Berkeley packet filter # Internet family options: # # IPDIVERT enables the divert IP sockets, used by ``ipfw divert'' # # IPSTEALTH enables code to support stealth forwarding (i.e., forwarding # packets without touching the ttl). This can be useful to hide firewalls # from traceroute and similar tools. # options IPDIVERT #divert sockets options IPSTEALTH #support for stealth forwarding # TCPDEBUG enables code which keeps traces of the TCP state machine # for sockets with the SO_DEBUG option set, which can then be examined # using the trpt(8) utility. # #options TCPDEBUG # RANDOM_IP_ID causes the ID field in IP packets to be randomized # instead of incremented by 1 with each packet generated. This # option closes a minor information leak which allows remote # observers to determine the rate of packet generation on the # machine by watching the counter. # options RANDOM_IP_ID # Zero copy sockets support. This enables "zero copy" for sending and # receving data via a socket. The send side works for any type of NIC, # the receive side only works for NICs that support MTUs greater than the # page size of your architecture and that support header splitting. See # zero_copy(9) for more details. # options ZERO_COPY_SOCKETS ##################################################################### # FILESYSTEM OPTIONS ##################################################################### # Only the root, /usr, and /tmp filesystems need be statically # compiled; everything else will be automatically loaded at mount # time. (Exception: the UFS family--- FFS --- cannot # currently be demand-loaded.) Some people still prefer to statically # compile other filesystems as well. options FFS #Fast filesystem # Soft updates is a technique for improving filesystem speed and # making abrupt shutdown less risky. # options SOFTUPDATES # Directory hashing improves the speed of operations on very large # directories at the expense of some memory. # options UFS_DIRHASH ##################################################################### # POSIX P1003.1B ##################################################################### # Real time extensions added in the 1993 Posix # P1003_1B: Infrastructure # _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING # options _KPOSIX_PRIORITY_SCHEDULING ##################################################################### # CLOCK OPTIONS ##################################################################### # The granularity of operation is controlled by the kernel option HZ whose # default value (100) means a granularity of 10ms (1s/HZ). # Some subsystems, such as DUMMYNET, might benefit from a smaller # granularity such as 1ms or less, for a smoother scheduling of packets. # Consider, however, that reducing the granularity too much might # cause excessive overhead in clock interrupt processing, # potentially causing ticks to be missed and thus actually reducing # the accuracy of operation. # #options HZ=100 ##################################################################### # SCSI DEVICES ##################################################################### # All SCSI devices allocate as many units as are required. # The ch driver drives SCSI Media Changer ("jukebox") devices. # # The da driver drives SCSI Direct Access ("disk") and Optical Media # ("WORM") devices. # # The cd driver drives SCSI Read Only Direct Access ("cd") devices. # # The ses driver drives SCSI Envinronment Services ("ses") and # SAF-TE ("SCSI Accessable Fault-Tolerant Enclosure") devices. # # The pt driver drives SCSI Processor devices. # device scbus #base SCSI code device da #SCSI direct access devices (aka disks) device cd #SCSI CD-ROMs device ses #SCSI Environmental Services (and SAF-TE) device pt #SCSI processor device pass #CAM passthrough driver # SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter) # queue after a bus reset, and the number of milliseconds to # freeze the device queue after a bus device reset. This # can be changed at boot and runtime with the # kern.cam.scsi_delay tunable/sysctl. # options SCSI_DELAY=0 # Be pessimistic about Joe SCSI device ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS ##################################################################### # The `pty' device usually turns out to be ``effectively mandatory'', # as it is required for `telnetd', `rlogind', `screen', `emacs', and # `xterm', among others. # device pty #Pseudo ttys ##################################################################### # HARDWARE DEVICE CONFIGURATION ##################################################################### # The keyboard controller; it controls the keyboard and the PS/2 mouse. # device atkbdc # The AT keyboard # device atkbd # These options are valid for other keyboard drivers as well. # options KBD_INSTALL_CDEV # install a CDEV entry in /dev # `flags' for atkbd: # 0x01 Force detection of keyboard, else we always assume a keyboard # 0x02 Don't reset keyboard, useful for some newer ThinkPads # 0x03 Force detection and avoid reset, might help with certain # dockingstations # 0x04 Old-style (XT) keyboard support, useful for older ThinkPads # PS/2 mouse # device psm # Video card driver for VGA adapters. # device vga # The syscons console driver (sco color console compatible). # device sc #options SC_PIXEL_MODE # add support for the raster text mode options SC_HISTORY_SIZE=2000 # number of history buffer lines # The following options will let you change the default behaviour of # cut-n-paste feature # options SC_CUT_SPACES2TABS # convert leading spaces into tabs # If you have a two button mouse, you may want to add the following option # to use the right button of the mouse to paste text. # options SC_TWOBUTTON_MOUSE # `flags' for sc # 0x80 Put the video card in the VESA 800x600 dots, 16 color mode # 0x100 Probe for a keyboard device periodically if one is not present # bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x, # BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F # # This is the SCSI device VMware emulates. Think lnc for disks. # device bt # The 'ATA' driver supports all ATA and ATAPI devices, including PC Card # devices. You only need one "device ata" for it to find all # PCI and PC Card ATA/ATAPI devices on modern machines. device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives #device atapicam # emulate ATAPI devices as SCSI ditto via CAM # needs CAM to be present (scbus & pass) # ATA_STATIC_ID: controller numbering is static ie depends on location # else the device numbers are dynamically allocated. # options ATA_STATIC_ID # Parallel-Port Bus # # Parallel port bus support is provided by the `ppbus' device. # Multiple devices may be attached to the parallel port, devices # are automatically probed and attached when found. # # Supported devices: # lpt Parallel Printer # ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O # lpbb Philips official parallel port I2C bit-banging interface # # Supported interfaces: # ppc ISA-bus parallel port interfaces. # options PPC_PROBE_CHIPSET # Enable chipset specific detection # (see flags in ppc(4)) options PERIPH_1284 # Makes your computer act as a IEEE1284 # compliant peripheral device ppc device ppbus ##################################################################### # ##################################################################### # Set the amount of time (in seconds) the system will wait before # rebooting automatically when a kernel panic occurs. If set to (-1), # the system will wait indefinitely until a key is pressed on the # console. # options PANIC_REBOOT_WAIT_TIME=10 ##################################################################### --------------050406040009030705040109-- --------------ms070108040908020005070203 Content-Type: application/x-pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" Content-Description: S/MIME Cryptographic Signature MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIJbjCC AxUwggJ+oAMCAQICAwmpeDANBgkqhkiG9w0BAQQFADCBkjELMAkGA1UEBhMCWkExFTATBgNV BAgTDFdlc3Rlcm4gQ2FwZTESMBAGA1UEBxMJQ2FwZSBUb3duMQ8wDQYDVQQKEwZUaGF3dGUx HTAbBgNVBAsTFENlcnRpZmljYXRlIFNlcnZpY2VzMSgwJgYDVQQDEx9QZXJzb25hbCBGcmVl bWFpbCBSU0EgMjAwMC44LjMwMB4XDTAzMDQwNDIwNTUxMloXDTA0MDQwMzIwNTUxMlowWTEN MAsGA1UEBBMEV2FuZzEQMA4GA1UEKhMHWXUtU2h1bjEVMBMGA1UEAxMMWXUtU2h1biBXYW5n MR8wHQYJKoZIhvcNAQkBFhB5dXNodW53YUBpc2kuZWR1MIIBIjANBgkqhkiG9w0BAQEFAAOC AQ8AMIIBCgKCAQEAnQT154gVRJv1yQTa7P3tqoEgIYhAtwbhiLO/IU5yViH2HEoUXNerzj1Z DBdDXgmHowEJIngp2K4kNJA3DT6NMUHBF0KvYWt6baH5PxmHOCmV5JcVJfgkO3HZsj6+FkqY /Elbh4Vp52mmhRrcDIhk5tnco8/Wp5HBajFRFVElIzsi11HeE9P2J3QjXqs2bGVFNX9K5DN2 zwwylfPcdrb+dJNlMuIuIR30Iem7uk3v3Wueq5aNvfH8nR4A0kbhXszIb0tK8bE3IIWSWVFd 2dHFTZDzZNn/MI0Ahn7L1NOGiiIiz84d3EQj1xkjysPkNi5PaGvuWTeetIroyEocS5N4cwID AQABoy0wKzAbBgNVHREEFDASgRB5dXNodW53YUBpc2kuZWR1MAwGA1UdEwEB/wQCMAAwDQYJ KoZIhvcNAQEEBQADgYEASHvyupWAk0FP9zL9rS8OWkgeSHw7leTY47DrdWz06A83ZDwpDToF J3AZMxreJ5sPjntl4nu5FVqCF9PX8HCzdYS7DM6PpwXSKzWdD0crBcdMOA/z1Pa0JBCXagDe d1TuGi/OBGBDhsN/MHb4HAhHpmabdUwgYO/OHxk2F/ZdrIcwggMVMIICfqADAgECAgMJqXgw DQYJKoZIhvcNAQEEBQAwgZIxCzAJBgNVBAYTAlpBMRUwEwYDVQQIEwxXZXN0ZXJuIENhcGUx EjAQBgNVBAcTCUNhcGUgVG93bjEPMA0GA1UEChMGVGhhd3RlMR0wGwYDVQQLExRDZXJ0aWZp Y2F0ZSBTZXJ2aWNlczEoMCYGA1UEAxMfUGVyc29uYWwgRnJlZW1haWwgUlNBIDIwMDAuOC4z MDAeFw0wMzA0MDQyMDU1MTJaFw0wNDA0MDMyMDU1MTJaMFkxDTALBgNVBAQTBFdhbmcxEDAO BgNVBCoTB1l1LVNodW4xFTATBgNVBAMTDFl1LVNodW4gV2FuZzEfMB0GCSqGSIb3DQEJARYQ eXVzaHVud2FAaXNpLmVkdTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAJ0E9eeI FUSb9ckE2uz97aqBICGIQLcG4YizvyFOclYh9hxKFFzXq849WQwXQ14Jh6MBCSJ4KdiuJDSQ Nw0+jTFBwRdCr2Frem2h+T8ZhzgpleSXFSX4JDtx2bI+vhZKmPxJW4eFaedppoUa3AyIZObZ 3KPP1qeRwWoxURVRJSM7ItdR3hPT9id0I16rNmxlRTV/SuQzds8MMpXz3Ha2/nSTZTLiLiEd 9CHpu7pN791rnquWjb3x/J0eANJG4V7MyG9LSvGxNyCFkllRXdnRxU2Q82TZ/zCNAIZ+y9TT hooiIs/OHdxEI9cZI8rD5DYuT2hr7lk3nrSK6MhKHEuTeHMCAwEAAaMtMCswGwYDVR0RBBQw EoEQeXVzaHVud2FAaXNpLmVkdTAMBgNVHRMBAf8EAjAAMA0GCSqGSIb3DQEBBAUAA4GBAEh7 8rqVgJNBT/cy/a0vDlpIHkh8O5Xk2OOw63Vs9OgPN2Q8KQ06BSdwGTMa3iebD457ZeJ7uRVa ghfT1/Bws3WEuwzOj6cF0is1nQ9HKwXHTDgP89T2tCQQl2oA3ndU7hovzgRgQ4bDfzB2+BwI R6Zmm3VMIGDvzh8ZNhf2XayHMIIDODCCAqGgAwIBAgIQZkVyt8x09c9jdkWE0C6RATANBgkq hkiG9w0BAQQFADCB0TELMAkGA1UEBhMCWkExFTATBgNVBAgTDFdlc3Rlcm4gQ2FwZTESMBAG A1UEBxMJQ2FwZSBUb3duMRowGAYDVQQKExFUaGF3dGUgQ29uc3VsdGluZzEoMCYGA1UECxMf Q2VydGlmaWNhdGlvbiBTZXJ2aWNlcyBEaXZpc2lvbjEkMCIGA1UEAxMbVGhhd3RlIFBlcnNv bmFsIEZyZWVtYWlsIENBMSswKQYJKoZIhvcNAQkBFhxwZXJzb25hbC1mcmVlbWFpbEB0aGF3 dGUuY29tMB4XDTAwMDgzMDAwMDAwMFoXDTA0MDgyNzIzNTk1OVowgZIxCzAJBgNVBAYTAlpB MRUwEwYDVQQIEwxXZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93bjEPMA0GA1UEChMG VGhhd3RlMR0wGwYDVQQLExRDZXJ0aWZpY2F0ZSBTZXJ2aWNlczEoMCYGA1UEAxMfUGVyc29u YWwgRnJlZW1haWwgUlNBIDIwMDAuOC4zMDCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkCgYEA 3jMypmPHCSVFPtJueCdngcXaiBmClw7jRCmKYzUqbXA8+tyu9+50bzC8M5B/+TRxoKNtmPHD T6Jl2w36S/HW3WGl+YXNVZo1Gp2Sdagnrthy+boC9tewkd4c6avgGAOofENCUFGHgzzwObSb VIoTh/+zm51JZgAtCYnslGvpoWkCAwEAAaNOMEwwKQYDVR0RBCIwIKQeMBwxGjAYBgNVBAMT EVByaXZhdGVMYWJlbDEtMjk3MBIGA1UdEwEB/wQIMAYBAf8CAQAwCwYDVR0PBAQDAgEGMA0G CSqGSIb3DQEBBAUAA4GBADGxS0dd+QFx5fVTbF151j2YwCYTYoEipxL4IpXoG0m3J3sEObr8 5vIk65H6vewNKjj3UFWobPcNrUwbvAP0teuiR59sogxYjTFCCRFssBpp0SsSskBdavl50Oou Jd2K5PzbDR+dAvNa28o89kTqJmmHf0iezqWf54TYyWJirQXGMYID1TCCA9ECAQEwgZowgZIx CzAJBgNVBAYTAlpBMRUwEwYDVQQIEwxXZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93 bjEPMA0GA1UEChMGVGhhd3RlMR0wGwYDVQQLExRDZXJ0aWZpY2F0ZSBTZXJ2aWNlczEoMCYG A1UEAxMfUGVyc29uYWwgRnJlZW1haWwgUlNBIDIwMDAuOC4zMAIDCal4MAkGBSsOAwIaBQCg ggIPMBgGCSqGSIb3DQEJAzELBgkqhkiG9w0BBwEwHAYJKoZIhvcNAQkFMQ8XDTA0MDEwODAw NDYxMlowIwYJKoZIhvcNAQkEMRYEFDPT3pxHk05MVug+1CA5PWl6PVmZMFIGCSqGSIb3DQEJ DzFFMEMwCgYIKoZIhvcNAwcwDgYIKoZIhvcNAwICAgCAMA0GCCqGSIb3DQMCAgFAMAcGBSsO AwIHMA0GCCqGSIb3DQMCAgEoMIGrBgkrBgEEAYI3EAQxgZ0wgZowgZIxCzAJBgNVBAYTAlpB MRUwEwYDVQQIEwxXZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93bjEPMA0GA1UEChMG VGhhd3RlMR0wGwYDVQQLExRDZXJ0aWZpY2F0ZSBTZXJ2aWNlczEoMCYGA1UEAxMfUGVyc29u YWwgRnJlZW1haWwgUlNBIDIwMDAuOC4zMAIDCal4MIGtBgsqhkiG9w0BCRACCzGBnaCBmjCB kjELMAkGA1UEBhMCWkExFTATBgNVBAgTDFdlc3Rlcm4gQ2FwZTESMBAGA1UEBxMJQ2FwZSBU b3duMQ8wDQYDVQQKEwZUaGF3dGUxHTAbBgNVBAsTFENlcnRpZmljYXRlIFNlcnZpY2VzMSgw JgYDVQQDEx9QZXJzb25hbCBGcmVlbWFpbCBSU0EgMjAwMC44LjMwAgMJqXgwDQYJKoZIhvcN AQEBBQAEggEAmAoS4DHT4l8Hkxp1PZRdjEBWzhWEUAaY/C7PG9rb16bPmmjL9eJmOufW8Q+U 5Y6oB3DX4j8kKIzfWt2TCIvjs1YA7vwN88T7lG9HgzU5R2+QVbgOzzlK2hte7fj45P+25kLn UUNMTXSoE2KtbT2UtTdM5LndOZUgHTa1UM8YxVoWQJ2THFakFD5j246RljwhJKqmJrroux0t 1WFr/YtPNc5ifNOYMAZgCqcjX3aiqEU1CFuKwvgnIftevg2HOK/y2G/+bn8hqVpqEpUaVM36 /SMU0qqIYb7xX+OBoXvOWlZ/suEmDOuAE0aPpp3dMHE2WTj8cG4G5lcrFFUM5wZBkQAAAAAA AA== --------------ms070108040908020005070203--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3FFCA854.7040707>