Date: Mon, 30 May 2016 19:11:27 +0200 From: Luciano Mannucci <luciano@vespaperitivo.it> To: freebsd-ppc@freebsd.org Subject: Re: IBM KVM on P8 saga: FreeBSD-11.0-ALPHA1-powerpc-powerpc64-20160528-r300895 won't boot Message-ID: <3rJNSk16Hjz1cXKx@baobab.bilink.it> In-Reply-To: <3r9Zbp6spTz1cXL0@baobab.bilink.it> References: <3r9Zbp6spTz1cXL0@baobab.bilink.it>
next in thread | previous in thread | raw e-mail | index | archive | help
Here's what I get:
USB Keyboard
USB mouse
Using default console: /vdevice/vty@30000000
Welcome to Open Firmware
Copyright (c) 2004, 2011 IBM Corporation All rights reserved.
This program and the accompanying materials are made available
under the terms of the BSD License available at
http://www.opensource.org/licenses/bsd-license.php
Trying to load: from: /vdevice/v-scsi@2000/disk@8001000000000000 ... Successfully loaded
Consoles: Open Firmware console
FreeBSD/powerpc64 Open Firmware loader, Revision 0.1
(root@releng2.nyi.freebsd.org, Sat May 28 10:43:53 UTC 2016)
Memory: 2097152KB
Booted from: /vdevice/v-scsi@2000/disk@8001000000000000
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0xe9d250+0x423cf0 syms=[0x8+0x14b338+0x8+0x147cf2]
\
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Kernel entry at 0x1024f0 ...
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-ALPHA1 #0 r300895: Sat May 28 10:51:49 UTC 2016
root@releng2.nyi.freebsd.org:/usr/obj/powerpc.powerpc64/usr/src/sys/GENERIC64 powerpc
gcc version 4.2.1 20070831 patched [FreeBSD]
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
cpu0: IBM POWER8E revision 2.1, 3425.00 MHz
cpu0: Features dc005180<PPC32,PPC64,ALTIVEC,FPU,MMU,SMT,ARCH205,ARCH206,VSX>
cpu0: Features2 c2000000<ARCH207,HTM,VCRYPTO>
real memory = 2110451712 (2012 MB)
avail memory = 1989775360 (1897 MB)
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
cpu0: dev=7e5e00b8 (BSP)
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree> on nexus0
xicp0: <PAPR virtual interrupt controller> on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
cpu4: <Open Firmware CPU> on cpulist0
cpu5: <Open Firmware CPU> on cpulist0
pcib0: <RTAS Host-PCI bridge> on ofwbus0
pci0: <POWER Hypervisor PCI bus> on pcib0
pci0: <old> at device 3.0 (no driver attached)
ohci0: <Apple KeyLargo/Intrepid USB controller> mem 0xc0000000-0xc00000ff irq 4100 at device 2.0 on pci0
usbus0 on ohci0
re0: <RealTek 8139C+ 10/100BaseTX> port 0x100-0x1ff mem 0xc0000100-0xc00001ff irq 4099 at device 1.0 on pci0
re0: Chip rev. 0x74800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 52:54:00:1a:cd:48
rtas0: <Run-Time Abstraction Services> on ofwbus0
vdevice0: <POWER Hypervisor Virtual Device Root> on ofwbus0
vscsi0: <POWER Hypervisor Virtual SCSI Bus> irq 16781319 on vdevice0
vscsi0: Queue depth 22 commands
uart0: <POWER Hypervisor Virtual Serial Port> irq 16781320 on vdevice0
Timecounter "timebase" frequency 512000000 Hz quality 0
Event timer "decrementer" frequency 512000000 Hz quality 1000
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
cd0 at vscsi0 bus 0 scbus0 target 0 lun 1
ugen0.1: <Apple> at usbus0
uhub0: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
cd0: <QEMU QEMU CD-ROM 2.3.> Removable CD-ROM SPC-3 SCSI device
cd0: 150.000MB/s transfers
cd0: 695MB (356118 2048 byte sectors)
pass0 at vscsi0 bus 0 scbus0 target 0 lun 0
pass0: <QEMU QEMU TARGET 2.3> Fixed Uninstalled SPC-3 SCSI device (offline)
pass0: 150.000MB/s transfers
da0 at vscsi0 bus 0 scbus0 target 0 lun 2
da0: <QEMU QEMU HARDDISK 2.3.> Fixed Direct Access SPC-3 SCSI device
da0: 150.000MB/s transfers
da0: 20480MB (41943040 512 byte sectors)
SMP: AP CPU #8 launched
SMP: AP CPU #32 launched
SMP: AP CPU #24 launched
SMP: AP CPU #16 launched
SMP: AP CPU #40 launched
at this point everything is frozen, all the virtual cpus are 100%.
luciano.
--
/"\ /Via A. Salaino, 7 - 20144 Milano (Italy)
\ / ASCII RIBBON CAMPAIGN / PHONE : +39 2 485781 FAX: +39 2 48578250
X AGAINST HTML MAIL / E-MAIL: posthamster@sublink.sublink.ORG
/ \ AND POSTINGS / WWW: http://www.lesassaie.IT/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3rJNSk16Hjz1cXKx>