Date: Sun, 29 Feb 2004 12:02:41 +0200 From: Evren Yurtesen <yurtesen@ispro.net.tr> To: Vincent Poy <vince@oahu.WURLDLINK.NET>, current@FreeBSD.ORG Subject: Re: buildworld times Message-ID: <4041B8C1.8000309@ispro.net.tr> In-Reply-To: <20040228144714.P8264-100000@oahu.WURLDLINK.NET> References: <20040228144714.P8264-100000@oahu.WURLDLINK.NET>
next in thread | previous in thread | raw e-mail | index | archive | help
It takes 15 minutes on this one with make buildworld...
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Fri Feb 6 13:59:01 EET 2004
toor@proxy.ispro.net.tr:/usr/obj/usr/src/sys/PROXY
Preloaded elf kernel "/boot/kernel/kernel" at 0xc075a000.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc075a21c.
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.06GHz (3059.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2142437376 (2043 MB)
avail memory = 2094530560 (1997 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
VESA: v3.0, 3904k memory, flags:0x1, mode table:0xc06d8260 (1000040)
VESA: Intel(r)865G Graphics Chip Accelerated VGA BIOS
module_register_init: MOD_LOAD (splash_bmp, 0xc0755810, 0) error 2
acpi0: <A M I OEMRSDT> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00f5420
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0xefe0-0xefe7 mem
0xfe780000-0xfe7fffff,0xf0000000-0xf7ffffff irq 16 at device 2.0 on pci0
agp0: detected 3964k stolen memory
agp0: aperture size is 128M
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fxp0: <Intel 82551 Pro/100 Ethernet> port 0xdf00-0xdf3f mem
0xfe5c0000-0xfe5dffff,0xfe5fe000-0xfe5fefff irq 21 at device 10.0 on pci1
fxp0: Ethernet address 00:07:e9:0d:ea:51
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 SATA150 controller> port
0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.2 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROM> at iomem 0xca800-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled,
default to accept, logging disabled
ad0: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata0-master UDMA100
ad2: 114473MB <ST3120026AS> [232581/16/63] at ata1-master UDMA100
ad3: 114473MB <ST3120026AS> [232581/16/63] at ata1-slave UDMA100
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a
Vincent Poy wrote:
> Hello all:
>
> I was wondering what people are getting as the fastest make
> buildworld times since it seems like a P4m-2.6Ghz 2GB RAM, 7200RPM HDD
> machine when using make -j4 buildworld or just make buildworld takes 2.5
> hours. I guess I'm trying to look for what the average times for
> buildworld is supposed to be for a Pentium 4 Northwood based platform.
>
> Cheers,
> Vince - vince@WURLDLINK.NET - Vice President ________ __ ____
> Unix Networking Operations - FreeBSD-Real Unix for Free / / / / | / |[__ ]
> WurldLink Corporation / / / / | / | __] ]
> San Francisco - Honolulu - Hong Kong / / / / / |/ / | __] ]
> HongKong Stars/Gravis UltraSound Mailing Lists Admin /_/_/_/_/|___/|_|[____]
> Almighty1@IRC - oahu.DAL.NET Hawaii's DALnet IRC Network Server Admin
>
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4041B8C1.8000309>