Date: Tue, 30 Mar 2004 14:43:09 +0500 From: Rauf Kuliyev <rauf@kuliyev.com> To: Matt Emmerton <matt@gsicomp.on.ca> Cc: freebsd-current@freebsd.org Subject: Re: Problems with fxp0 and wi0 devices Message-ID: <4069412D.1040809@kuliyev.com> In-Reply-To: <002501c415fb$aa8b7fa0$1200a8c0@gsicomp.on.ca> References: <002501c415fb$aa8b7fa0$1200a8c0@gsicomp.on.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
Matt, Try to add hw.pci.allow_unsupported_io_range=1 to /boot/loader.conf Regards, Rauf Matt Emmerton wrote: >I'm running FreeBSD 5.2.1-RELEASE on a ThinkPad T23 and I can't use either >of the built-in fxp0 or wi0 network adapters. > >Whenever I try and configure them with dhclient, dhclient just hangs. >Whenever I try and configure them manually (static IP and route), packets >never go anywhere. >Whenever I access fxp0, I get "fxp0: device timeout" messages on my screen. > >I looked through cvsweb and didn't see anything that looked useful post >5.2.1-REL. > >Here is the relevant part of dmesg: > >fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x7000-0x703f mem >0xc0200000-0xc0200fff irq 11 at device 8.0 on pci2 >fxp0: Ethernet address 00:d0:59:33:b2:eb > >wi0: <Intersil Prims2.5> mem 0xec000000-0xec000fff irq 11 at device 2.0 on >pci2 >wi0: 802.11 address: 00:20:e0:89:4e:0c >wi0: using RF:PRIMS2.5 MAC:ISL3874A(Mini-PCI) >wi0: Intersil Firmware: Primary (1.0.5), Station (1.3.3) >wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > >And pciconf -l: > >fxp0@pci2:8:0: class=0x020000 card=0x02091014 chip=0x10318086 rev=0x41 >hdr=0x00 >wi0@pci2:2:0: class=0x020000 card=0x40461668 chip=0x30731260 rev=0x01 >hdr=0x00 > >-- >Matt Emmerton > >_______________________________________________ >freebsd-current@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-current >To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4069412D.1040809>