Skip site navigation (1)Skip section navigation (2) 
Date:      Fri, 24 Dec 2004 21:42:32 +0530
From:      "Subhro" <subhro.kar@gmail.com>
To:        "'Mark Jayson Alvarez'" <jay2xra@yahoo.com>, <freebsd-questions@freebsd.org>
Subject:   RE: Is this new hard drive going to be useless with freebsd?
Message-ID:  <41cc3ff7.601f054a.7e21.0125@smtp.gmail.com>
In-Reply-To: <20041224145719.89760.qmail@web51607.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help 

[-- Attachment #1 --]



> -----Original Message-----
> From: owner-freebsd-questions@freebsd.org [mailto:owner-freebsd-
> questions@freebsd.org] On Behalf Of Mark Jayson Alvarez
> Sent: Friday, December 24, 2004 20:27
> To: freebsd-questions@freebsd.org
> Subject: Is this new hard drive going to be useless with freebsd?
> 
> 
> Good day,
> 
>     I currently have this setup at home and its
> working fine with FreeBSD 4.10.
> 
> Motherboard:  Jetway 830CH
> Hard Drive:   10 Gb Samsung
> Video Card:   SiS on-board
> Processor:    AMD Athlon 1200 Mhz  (this is not an
> Athlon XP)
> Memory:       256 mb PC100 SDRAM
> 
> I bought a new 80 Gb Seagate 7200 rpm Hard Drive and
> installed it on the primary master my pc.
> The access mode for my hard drive <Primary Master:
> ST380011A> in BIOS which shows these choices is set to
> Auto:
> 
>    CHS
>    LBA
>    Large
>    Auto
> 
> I boot into FreeBSD 5.3 cd and proceed with the
> installation. Some time after choosing the X-User in
> the installation method, it ended up failing to
> install some packages(perl and xorg). Still, it says,
> Congratulations... FreeBSD is now installed... (and
> I'm really hoping that nothing went wrong with the
> base system, and thinking to just install perl and
> xorg later).
> 
> I removed the cd, and boot the pc. The kernel boots
> silently until this error message showed up:
> 
> 
> ad0 Warning_Read_DMA UDMA ICRC error(retrying request)
> LBA=1518639
> ad0: Failure_Read_DMA status=51<READY,DSC,ERROR>
> error=84 <ICRC, ABORTED> LBA=1518639
> spec_getpages:(ad0s1a) I/O read failure:(error=5)
> bp0xc65fe2ec vp0xc16f7d68
> size: 32768,resid:32768,a_count:37268, valid: 0x0
> nread:0, reqpage:7, pindex:61, pcount:8
> vm_fault:pager read error, pid 55(sh)
> pid 55(sh),uid 0:exited on signal 11
> Dec 24 17:28:39 init: /bin/sh on /etc/rc terminated
> abnormally, going to single user mode
> Enter full pathname of shell or RETURN for /bin/sh:

I suspect a bad Drive Cable. Could you tell us about how you have installed
the drives? I mean master slave-configuration,etc

Regards
S.

Indian Institute of Information Technology
Subhro Sankha Kar
Block AQ-13/1, Sector V
Salt Lake City
PIN 700091
India

[-- Attachment #2 --]
0	*H
010	+0	*H
	0=0ͺVT"rU0
	*H
0_10	UUS10U
VeriSign, Inc.1705U.Class 1 Public Primary Certification Authority0
960129000000Z
280801235959Z0_10	UUS10U
VeriSign, Inc.1705U.Class 1 Public Primary Certification Authority00
	*H
0mVa-Hqg޹뷞
8%Fs$]
enVsߴX9knը?14׏4g	NEVixG)6c\-{2{0*/1g0
	*H
L?hC3]Mz36ؕ"6hl|B.?OvJ͠
)"]݁#{%F0yK@<_SH䆴{5{%ӎ?84q0f0Ϡ
O[uj)0
	*H
0_10	UUS10U
VeriSign, Inc.1705U.Class 1 Public Primary Certification Authority0
980512000000Z
080512235959Z010U
VeriSign, Inc.10UVeriSign Trust Network1F0DU=www.verisign.com/repository/RPA Incorp. By Ref.,LIAB.LTD(c)981H0FU?VeriSign Class 1 CA Individual Subscriber-Persona Not Validated00
	*H
0ZDUz-Ox6
JoTw*h1ApzKHV-BD\B/;'
]6B3nTOJƚj$e~7jJ	00	`HB05U.0,0*(&$http://crl.verisign.com/pca1.1.1.crl0GU @0>0<`HE0-0++www.verisign.com/repository/RPA0U00U0
	*H
B|ߌyLMU/P^N.^2yeJRը1!l4x		BZъު"!e3 3
>5d$[h|7d
Ž33>>s020:N4fr۝40
	*H
010U
VeriSign, Inc.10UVeriSign Trust Network1F0DU=www.verisign.com/repository/RPA Incorp. By Ref.,LIAB.LTD(c)981H0FU?VeriSign Class 1 CA Individual Subscriber-Persona Not Validated0
041111000000Z
050718235959Z010U
VeriSign, Inc.10UVeriSign Trust Network1F0DU=www.verisign.com/repository/RPA Incorp. by Ref.,LIAB.LTD(c)9810UPersona Not Validated1402U+Digital ID Class 1 - Microsoft Full Service10U
Subhro Kar1#0!	*H
	subhro.kar@gmail.com00
	*H
0)Fp["
,9Uڵ87(v0r1C.\4VP@h!"r(
	⎅?-"2K00	U00DU =0;09`HE0*0(+https://www.verisign.com/rpa0U0U%0++0
`HENone03U,0*0(&$"http://crl.verisign.com/class1.crl0
	*H
]5羧n-A$NyiIk{}Y(DKTHE@&mZK#TEWO.bqƼsE	$raEsh{Os{[=zz_,v߈QԊ>1>0:0010U
VeriSign, Inc.10UVeriSign Trust Network1F0DU=www.verisign.com/repository/RPA Incorp. By Ref.,LIAB.LTD(c)981H0FU?VeriSign Class 1 CA Individual Subscriber-Persona Not Validated:N4fr۝40	+0	*H
	1	*H
0	*H
	1
041224161231Z0#	*H
	1}`.XmHޥ0g	*H
	1Z0X0
*H
0*H
0
*H
@0+0
*H
(0+0
*H
0	+710010U
VeriSign, Inc.10UVeriSign Trust Network1F0DU=www.verisign.com/repository/RPA Incorp. By Ref.,LIAB.LTD(c)981H0FU?VeriSign Class 1 CA Individual Subscriber-Persona Not Validated:N4fr۝40*H
	1䠁010U
VeriSign, Inc.10UVeriSign Trust Network1F0DU=www.verisign.com/repository/RPA Incorp. By Ref.,LIAB.LTD(c)981H0FU?VeriSign Class 1 CA Individual Subscriber-Persona Not Validated:N4fr۝40
	*H
]mw>)
FĀo3!;D>A%(pch>iXM7}X,w'dJq)R,$.L 
M&6,*> ;

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41cc3ff7.601f054a.7e21.0125>