Date: Sat, 23 Apr 2005 21:49:43 -0400 From: Christopher McGee <chris@xecu.net> To: freebsd-questions@freebsd.org Subject: Re: Stability problems with 5.3-Release Message-ID: <426AFB37.5060205@xecu.net> In-Reply-To: <20050422024159.GA9555@SDF.LONESTAR.ORG> References: <8390c4b6d29d135ecb6e84e5a9270ec7@xecu.net> <20050422024159.GA9555@SDF.LONESTAR.ORG>
next in thread | previous in thread | raw e-mail | index | archive | help
Justin R. Pessa wrote: >On Apr 21 05 06:22PM, Chris McGee wrote: > > >>I've got 2 identical boxes (Supermicro sys-6023P-8R) running with ZCR >>adaptec cards with 6 73Gig seagate scsi drives, 4 Gigs of ram, and dual >>2.4 Ghz Xeons. Both of these machines are running 5.3-Release-p8. The >>usually run for a day, give or take, and then they crash. The just >>deadlock, no console response, no nothing. The get power cycled and >>they are fine for a little while again. These are configured to be >>mysql database servers. I can provide any information necessary, but >>i'm stumped and it's causing me a lot of heartache now. >> >> > >I've had similar problems as well. One thing I noticed is that a process >may get hung in the D state and never returns. From there it seems the >system enters a downward spiral and everything locks up. I've had this >problem with p6 and p7. Attached is my dmesg output. Not sure if it's >helpful... > >I can't offer anything in the form of a solution but figured I'd chime >in so that Chris doesn't think he's the only (crazy) one with this >problem! ;) > > > >>Chris >> >>_______________________________________________ >>freebsd-questions@freebsd.org mailing list >>http://lists.freebsd.org/mailman/listinfo/freebsd-questions >>To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" >> >> > > >- j > >.__________________________________. >| Justin R. Pessa - BOFH >| www: http://jstn.sdf1.org >| pgp: http://jstn.sdf1.org/pgp.html >| irc: asdf @ irc.freenode.net >' > > >------------------------------------------------------------------------ > >Copyright (c) 1992-2004 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD 5.3-RELEASE-p7 #3: Thu Apr 21 13:24:51 EDT 2005 > jstn@twinturbo:/usr/obj/usr/src/sys/TWINTURBO >Timecounter "i8254" frequency 1193182 Hz quality 0 >CPU: Intel(R) Pentium(R) 4 CPU 1700MHz (1707.56-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf0a Stepping = 10 > Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> >real memory = 268349440 (255 MB) >avail memory = 257130496 (245 MB) >npx0: [FAST] >npx0: <math processor> on motherboard >npx0: INT 16 interface >acpi0: <ASUS P4T> on motherboard >acpi0: Power Button (fixed) >Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 >cpu0: <ACPI CPU (2 Cx states)> on acpi0 >acpi_button0: <Power Button> on acpi0 >pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >pci0: <ACPI PCI bus> on pcib0 >agp0: <Intel 82850 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 >pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 >pci1: <ACPI PCI bus> on pcib1 >pci1: <display, VGA> at device 0.0 (no driver attached) >pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 >pci2: <ACPI PCI bus> on pcib2 >pcm0: <Creative EMU10K1> port 0xd800-0xd81f irq 9 at device 6.0 on pci2 >pcm0: <SigmaTel STAC9708/11 AC97 Codec> >rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xf1800000-0xf18000ff irq 9 at device 11.0 on pci2 >miibus0: <MII bus> on rl0 >rlphy0: <RealTek internal media interface> on miibus0 >rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >rl0: Ethernet address: 00:02:2a:b3:24:a0 >isab0: <PCI-ISA bridge> at device 31.0 on pci0 >isa0: <ISA bus> on isab0 >atapci0: <Intel ICH2 UDMA100 controller> port 0xb800-0xb80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 >ata0: channel #0 on atapci0 >ata1: channel #1 on atapci0 >uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 9 at device 31.2 on pci0 >uhci0: [GIANT-LOCKED] >usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 >usb0: USB revision 1.0 >uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub0: 2 ports with 2 removable, self powered >ums0: KYE Genius USB Wheel Mouse, rev 1.00/0.00, addr 2, iclass 3/1 >ums0: 3 buttons and Z dir. >pci0: <serial bus, SMBus> at device 31.3 (no driver attached) >uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0 >uhci1: [GIANT-LOCKED] >usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 >usb1: USB revision 1.0 >uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub1: 2 ports with 2 removable, self powered >fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 >fdc0: [FAST] >fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >ppc0: <ECP parallel printer port> port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0 >ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode >ppc0: FIFO with 16/16/8 bytes threshold >ppbus0: <Parallel port bus> on ppc0 >sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 >sio0: type 16550A >sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 >sio1: type 16550A >atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 >atkbd0: <AT Keyboard> irq 1 on atkbdc0 >kbd0 at atkbd0 >atkbd0: [GIANT-LOCKED] >orm0: <ISA Option ROMs> at iomem 0xcc000-0xcffff,0xc0000-0xcb7ff on isa0 >pmtimer0 on isa0 >sc0: <System console> at flags 0x100 on isa0 >sc0: VGA <16 virtual consoles, flags=0x300> >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >Timecounter "TSC" frequency 1707557872 Hz quality 800 >Timecounters tick every 10.000 msec >acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% >ad0: 19092MB <ST320011A/3.75> [38792/16/63] at ata0-master UDMA100 >ad1: 117246MB <Maxtor 6Y120L0/YAR41BW0> [238216/16/63] at ata0-slave UDMA100 >acd0: CDRW <TDK CDRW241040X/6.34> at ata1-master PIO4 >cd0 at ata1 bus 0 target 0 lun 0 >cd0: <TDK CDRW241040X 6.34> Removable CD-ROM SCSI-0 device >cd0: 16.000MB/s transfers >cd0: cd present [1 x 2048 byte records] >Mounting root from ufs:/dev/ad0s1a >link_elf: symbol in6_cksum undefined >link_elf: symbol in6_cksum undefined >ums0: at uhub0 port 2 (addr 2) disconnected >ums0: detached >ums0: KYE Genius USB Wheel Mouse, rev 1.00/0.00, addr 2, iclass 3/1 >ums0: 3 buttons and Z dir. >ums0: at uhub0 port 2 (addr 2) disconnected >ums0: detached >ums0: KYE Genius USB Wheel Mouse, rev 1.00/0.00, addr 2, iclass 3/1 >ums0: 3 buttons and Z dir. > > I have a little more information about this problem. We use dump for backups, and when the machines perform a dump with the -L flag, they always crash. If you dump without the -L it usually works, but they will still crash at random intervals. I have upgraded one of them to 5.4-RC3 and it's been about 20 hours without a crash, but the real test is when the dump runs. I'll update the list if I get anymore information about this. Chris
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?426AFB37.5060205>